全球化学锚固市场概览及成长机会（2024-2031年）

成长将由建设活动、市场渗透率和建筑标准驱动。

本文檔对化学锚栓进行了全面研究，包括2024年和2031年的详细预测。 2024年的收入和销售量预测按主要地区（美洲、欧洲、亚太地区以及中东和非洲）和应用领域（基础设施、工业、商业和住宅市场）划分。 2031年的预测则着重于全球层面的营收和销售量估计值。该模型指出，整体建设活动的扩张、市场渗透率的提高以及建筑规范的逐步收紧是市场成长的关键驱动因素。特别是，市场渗透率的成长主要归功于建筑技术的进步和化学成分的持续改进。同时，唯一被指出的限制因素是产品成分的变化可能会对销售需求产生负面影响，但预期这种影响微乎其微。总体而言，化学锚栓在全球受严格法规约束的计划中占据着重要地位，例如桥樑、水坝和其他关键基础设施。然而，工业、商业和住宅领域的采用因地区而异，并受到每个市场特有的复杂因素的影响。

报告摘要：化学锚栓市场

全球化学锚固市场规模预计在2024年达到11.6亿美元，并预计在2031年达到20.4亿美元，2025年至2031年的复合年增长率（CAGR）为8.3%。市场成长的主要驱动因素包括建设活动的增加、日益严格的建筑法规以及基础设施和工业计划中对高性能锚固解决方案的日益普及。此外，低挥发性黏合剂（VOC）和无苯乙烯黏合剂的普及，以及乙烯基酯和环氧乙烯基酯树脂配方的快速发展，正在重塑全球市场需求结构。

关键市场洞察

• 2024年，亚太地区占了最大的收入份额，达到38.5%，这主要得益于中国和印度强劲的基础设施发展。
• 由于环氧树脂锚栓具有优异的黏合强度和耐久性，因此占据市场主导地位，占总收入的 36% 以上。
• 由于乙烯基酯锚固件固化速度快，且具有优异的耐化学性和耐湿性，预计在预测期内，乙烯基酯锚固件的复合年增长率将最高。
• 2024年，基础设施和工业建筑领域占总需求的50%以上。
• 欧洲仍然是创新中心，产品认证（ETA、LEED）和永续性倡议影响着产品的发布。

市场规模及预测

• 2024年市场规模：11.6亿美元
• 2031年市场规模：20.4亿美元
• 复合年增长率（2025-2031年）：8.3%
• 最大市场：亚太地区
• 成长最快的市场：中东和非洲

市场背景

快速的都市化和建筑方法的现代化正在推动化学锚栓市场的发展，促使人们更加关注耐用、柔软性且环保的黏合剂解决方案。随着建筑商寻求具有快速固化、高强度和耐热性的材料，基于乙烯基酯和环氧乙烯基酯树脂的化学锚栓的需求不断增长。亚太和中东地区智慧城市和可再生能源基础设施计划的持续扩张预计将长期保持市场成长势头。

市场概览：化学锚固市场

化学锚栓市场在全球建筑生态系统中扮演着至关重要的角色，为高应力结构应用提供关键的黏合和紧固解决方案。本市场分析报告对2024年和2031年主要地区（美洲、欧洲、亚太地区、中东和非洲）以及基础设施、工业、商业和住宅建筑等终端应用领域进行了全面的收入和销售分析。

2024年的市场分析显示，化学锚栓被广泛应用于桥樑、隧道、水坝和公共设施等关键基础设施计划。这些应用将继续主导化学锚栓市场，产品可靠性和法规遵循是推动采购的主要因素。预计到2031年，在全球建设活动增加、应用率上升以及锚栓材料配方和安装技术不断改进的推动下，全球收入和销售将稳步增长。

市场渗透率的提升主要得益于施工方法的进步、黏合剂化学性能的增强以及固化性能的提升。现代黏合剂配方，特别是采用乙烯基酯和环氧乙烯基酯树脂的配方，具有更优异的拉伸强度、耐腐蚀性和更快的固化速度，这与乙烯基酯和环氧乙烯基酯树脂市场的整体创新趋势相契合。这些材料的改进不仅延长了应用寿命，还扩大了化学锚栓在复杂施工环境和永续性为导向的设计中的应用范围。

化学锚固剂市场的主要成长要素包括全球建筑投资激增、建筑规范现代化以及基础设施的大规模维修。政府机构和私人开发商对安全性和性能标准的重视，推动了受监管计划的稳定需求。然而，树脂配方的变化可能导致固化特性和环境相容性发生变化，这可能会限制阻碍因素规模，但预计从长远来看，这些变化对整体市场规模的影响微乎其微。

从区域来看，亚太市场凭藉大规模基础设施项目和不断扩大的工业製造基地继续保持主导，而欧洲则凭藉严格的品质和环境标准，继续保持技术中心地位。工业、商业和住宅领域的应用因地区而异，反映了当地的建筑实践、法规环境以及对化学锚固系统的认知度。

总体而言，在高性能材料、永续化学技术和不断发展的全球建筑标准的推动下，化学锚固市场正从专业的利基产品转变为先进建筑实践的核心组成部分。

分析范围：化学锚栓市场

本研究分析了更广泛的建筑材料生态系统中的化学锚栓市场，评估了 2024 年至 2031 年化学成分、应用和最终用户细分市场的趋势。

地理覆盖范围：

• 地区：北美、欧洲、亚太地区、拉丁美洲、中东和非洲
• 基准年：2024年 | 预测期间：2025-2031年

段范围：

• 依化学成分分类：环氧树脂、乙烯基酯、聚酯
• 按最终用户划分：基础设施、工业、商业、住宅建筑
• 依产品类型：胶囊、药筒

本分析着眼于化学锚栓市场不断发展的技术，重点阐述了环氧树脂和乙烯基酯树脂创新对固化时间、承载性能和环境安全性的影响。此外，本分析也探讨了乙烯基酯树脂和环氧乙烯基酯树脂市场的趋势和发展，着重介绍了树脂性能的提升如何为建筑业的黏合剂系统开闢新的可能性。

收入预测：化学锚栓市场

预计化学锚固剂市场将从 2024 年的 11.6 亿美元成长到 2031 年的 20.4 亿美元，复合年增长率为 8.3%。

依化学成分：

• 环氧树脂：4.19亿美元 → 7.38亿美元
• 乙烯基酯：4.07亿美元 → 7.02亿美元
• 聚酯基产品：3.37亿美元 → 5.97亿美元

用途：

• 基础设施和工业计划：综合复合年增长率为 7.9%，主要受交通网络现代化和扩张的推动。
• 商业和住宅应用：复合年增长率为 8.6%，主要由 DIY 和太阳能应用推动。

各地区贡献（2031 年预测）：

• 亚太地区：约占40%的份额
• 欧洲：约占22%的份额
• 北美：约占28%的份额

树脂创新和产品差异化，尤其是在乙烯基酯树脂和环氧乙烯基酯树脂市场的应用领域，将继续支持化学锚固领域的竞争性定价和性能改进，直至 2031 年。

细分市场分析：化学锚栓市场

依化学成分：

• 环氧树脂锚栓：具有最高的强度和耐久性，是重工业和基础设施应用的理想选择。
• 乙烯基酯树脂锚栓兼具强度和固化速度的优异平衡性，使其适用于大批量商业和住宅计划。这一趋势与乙烯基酯市场的成长密切相关。
• 聚酯锚栓：适用于轻型至中型载重需求的经济高效的解决方案。

用途：

• 基础设施（占 36.5%）：桥樑、隧道和公共工程是重点，环氧树脂系统是首选。
• 商业和工业建筑（总合的53.5%）：这是化学锚定市场的主要驱动力，尤其是在暖通空调、建筑幕墙和工厂安装方面，需求不断增长。
• 住宅（10%）：由于 DIY 和太阳能板安装使用量的增加而成长。

按地区划分：

• 亚太地区（APAC）：规模最大、成长最快的地区，其中中国和印度是需求的主要驱动力。
• 欧洲：重点是经过认证和永续的锚固产品。
• 北美：更严格的抗震和建筑安全标准正在推动其应用。

这种多样化的细分錶明，化学锚栓已从承包商的产品发展成为在多个建筑垂直领域中使用的主流解决方案，环氧乙烯基酯树脂市场的树脂创新也强化了这一趋势。

成长要素：化学锚栓市场

• 基础建设扩张：增加对亚太地区、非洲和中东的建设投资。
• 加强建筑标准：全球范围内更严格的标准正在推动对认证锚固件的需求。
• 技术进步：采用环氧-乙烯基酯混合配方，以提高性能。
• 永续性趋势：对低VOC、无苯乙烯黏合剂的需求。
• DIY 和太阳能应用：在住宅维修和可再生能源装置中的应用日益广泛。

  这些因素共同作用，巩固了化学锚固市场作为现代建筑关键基础的地位，并朝着更永续、固化更快、强度更高的树脂系统发展。

成长抑制因素：化学锚市场

• 材料成本高：与机械锚栓相比，环氧树脂和乙烯基酯树脂仍然很贵。
• 安装复杂：需要专业人员操作以确保性能稳定。
• 温度敏感性：极端条件会导致固化时间和黏合品质发生变化。
• 标准化的障碍：不同的区域认证标准（ETA、ICC、WRAS）使市场进入变得复杂。
• 原物料价格波动：树脂和催化剂价格的波动会影响生产利润率。

  这些因素共同限制了化学锚定剂市场的大规模应用，尤其是在新兴经济体中，人们对化学锚定剂市场的好处认识不足。

竞争格局：化学锚固剂市场

全球化学锚固市场集中度中等，喜利得、西卡、费雪和罗普格五家公司占了超过50%的总收入。这些领导企业透过多元化的产品线、遵守认证标准以及对新型树脂化学技术的研发投入来保持其竞争优势。

主要企业和重点领域：

• 喜利得：高性能环氧树脂锚栓和数位化辅助安装工具。
• 西卡：苯乙烯基和乙烯基酯树脂锚栓配方创新。
• Fischer：提供一系列快速固化的化学锚固剂和混合锚固剂。
• EJOT 和 Rawlplug：专注于区域市场渗透和 DIY 应用。

新兴趋势：

• 材料创新：环氧乙烯基酯树脂市场的成长正在推动配方稳定性和性能的提高。
• 永续性和认证：製造商优先考虑ETA、LEED和低VOC合规性。
• 产品商品搭售：将化学锚栓与配套的紧固系统和工具整合在一起。
• 地域扩张：中国和印度的製造商凭藉性价比高的产品正在获得市场份额。

未来十年，竞争优势将取决于混合树脂化学、数位化安装技术以及对永续性的承诺的创新。那些将乙烯基酯和环氧乙烯基酯树脂市场的专业知识应用于先进锚固系统的公司，将引领化学锚固市场发展的下一个阶段。

目录

策略要务8 (TM)

化学锚固剂市场的策略要务

• 地缘政治动盪
• 竞争加剧
• 颠覆性技术

化学锚栓市场成长机会分析

• 介绍
• 技术概述
• 不含苯乙烯的配方。为什么？
• 成长要素与限制因素
• 成长指标
• 区域数据和趋势
• 主要企业及市场集中度
• 化学锚固市场的认证

成长机会领域，化学锚

• 成长机会 1：住宅太阳能发电系统的自助安装套件
• 成长机会2：DIY住宅维修领域的成长
• 增长机会3：混合大体量木材的成长
• 成长机会 4：化学锚定剂和互补产品整合

一段变革性的成长之旅

• 由Growth Pipeline Engine（TM）™驱动

Growth is Driven by Construction Activity, Market Penetration, and Building Codes

This document provides a comprehensive study of chemical anchors, including detailed estimates for the years 2024 and 2031. For 2024, the analysis presents revenue and volume projections segmented by key regions-Americas, Europe, APAC, and MEASA-as well as by application segments comprising infrastructure, industrial, commercial, and residential markets. Looking ahead to 2031, the forecasts focus on global-level revenue and volume estimates. The underlying model identifies several critical drivers of market growth: overall construction activity, market penetration, and the progressive enhancement of building codes. Notably, penetration growth is primarily attributed to advancements in construction techniques and continuous improvements in chemical formulas. Conversely, the sole identified market restraint relates to potential changes in product formulations that could negatively affect volume demand, though this factor has been estimated to have a minimal impact. Generally, chemical anchors maintain a prominent presence globally within highly regulated projects such as bridges, dams, and other critical infrastructure. However, their adoption in the industrial, commercial, and residential sectors varies regionally, influenced by a complex interplay of factors unique to each market.

Report Summary: Chemical Anchor Market

The global Chemical Anchor Market size was estimated at USD 1.16 billion in 2024 and is projected to reach USD 2.04 billion by 2031, expanding at a CAGR of 8.3% from 2025 to 2031. Market growth is driven by increasing construction activity, stricter building regulations, and rising adoption of high-performance anchoring solutions in infrastructure and industrial projects. The shift toward low-VOC and styrene-free adhesives, along with rapid advancements in vinyl ester and epoxy vinyl ester resin formulations, is reshaping demand globally.

Key Market Insights

• Asia Pacific held the largest revenue share of 38.5% in 2024, supported by strong infrastructure development in China and India.
• Epoxy-based anchors dominated the market, accounting for over 36% of total revenue due to their superior bonding strength and durability.
• Vinyl ester anchors are expected to record the fastest CAGR during the forecast period owing to faster curing times and excellent resistance to chemicals and moisture.
• Infrastructure and industrial construction segments together represented more than 50% of total demand in 2024.
• Europe remains the innovation hub, with product certification (ETA, LEED) and sustainability initiatives shaping product launches.

Market Size & Forecast

• 2024 Market Size: USD 1.16 Billion
• 2031 Market Size: USD 2.04 Billion
• CAGR (2025-2031): 8.3%
• Largest Market: Asia Pacific
• Fastest-Growing Market: Middle East & Africa

Market Context

Rapid urbanization and modernization of construction practices are driving the chemical anchoring market, with growing emphasis on durable, flexible, and environmentally friendly bonding solutions. Demand for vinyl ester and epoxy vinyl ester resin-based chemical anchors is rising as builders seek faster-curing, high-strength, and temperature-resistant materials. Ongoing expansion of smart city and renewable infrastructure projects across Asia-Pacific and the Middle East is expected to sustain long-term market momentum.

Market Overview: Chemical Anchor Market

The Chemical Anchor Market plays a crucial role in the global construction ecosystem, providing essential bonding and fastening solutions for high-load structural applications. The market encompasses comprehensive revenue and volume analyses for 2024 and 2031, segmented by key regions-Americas, Europe, Asia-Pacific (APAC), and Middle East & Africa (MEASA)-as well as by end-use sectors such as infrastructure, industrial, commercial, and residential construction.

In 2024, the market analysis highlights a strong presence of chemical anchors across critical infrastructure projects including bridges, tunnels, dams, and public utilities. These applications remain central to the chemical anchoring market, where product reliability and regulatory compliance drive procurement. By 2031, global revenue and volume are forecast to expand steadily, underpinned by rising construction activity, increasing penetration rates, and continuous improvement in anchoring formulations and installation technologies.

Market penetration is particularly supported by advancements in construction methods, enhanced bonding chemistry, and improved curing performance. Modern adhesive formulations-especially those utilizing vinyl ester and epoxy vinyl ester resins-offer superior tensile strength, corrosion resistance, and faster curing capabilities, aligning with the broader innovation trends seen in the Vinyl Ester Market and Epoxy Vinyl Ester Resin Market. These material improvements not only extend application life cycles but also expand the suitability of chemical anchors for complex construction environments and sustainability-focused designs.

The primary growth drivers for the Chemical Anchor Market include the surge in global construction investments, modernization of building codes, and widespread infrastructure renovation. Governments and private developers alike are emphasizing safety and performance standards, creating consistent demand across regulated projects. Conversely, potential changes in resin formulations that alter curing characteristics or environmental compliance may pose minor constraints; however, these are estimated to have minimal long-term impact on overall market volumes.

Regionally, the Asia-Pacific market continues to lead due to large-scale infrastructure programs and expanding industrial manufacturing bases, while Europe remains the technology hub with stringent quality and environmental standards. Adoption across industrial, commercial, and residential segments varies by region, reflecting local construction practices, regulatory environments, and levels of awareness regarding chemical anchoring systems.

Overall, the Chemical Anchor Market is transitioning from a specialized product niche into a core component of advanced construction practices, driven by the convergence of high-performance materials, sustainable chemistry, and evolving global building standards.

Scope of Analysis: Chemical Anchor Market

This study analyzes the Chemical Anchor Market within the broader construction materials ecosystem, evaluating trends across chemistries, applications, and end-user segments from 2024 to 2031.

Geographic Scope:

• Regions: North America, Europe, Asia-Pacific, Latin America, Middle East & Africa
• Base Year: 2024 | Forecast Period: 2025-2031

Segmental Scope:

• By Chemistry: Epoxy, Vinyl Ester, Polyester
• By End User: Infrastructure, Industrial, Commercial, and Residential Construction
• By Product Type: Capsules and Cartridges

The analysis considers evolving technologies in the chemical anchoring market, emphasizing the impact of epoxy- and vinyl-ester-based innovations on curing time, load performance, and environmental safety. Additionally, the study connects market evolution with trends in the Vinyl Ester Market and Epoxy Vinyl Ester Resin Market, highlighting how resin improvements are redefining the future of adhesive bonding systems in construction.

Revenue Forecast: Chemical Anchor Market

The Chemical Anchor Market is forecast to grow from USD 1.16 billion in 2024 to USD 2.04 billion by 2031, representing a CAGR of 8.3%.

By Chemistry:

• Epoxy: USD 419M ? USD 738M
• Vinyl Ester: USD 407M ? USD 702M
• Polyester: USD 337M ? USD 597M

By End Use:

• Infrastructure & Industrial Projects: Combined CAGR 7.9%, driven by modernization and expansion of transportation networks.
• Commercial & Residential: CAGR 8.6%, supported by DIY and solar applications.

Regional Contribution (2031):

• Asia-Pacific: ~40% share
• Europe: ~22% share
• North America: ~28% share

Resin innovation and product differentiation-especially in Vinyl Ester Market and Epoxy Vinyl Ester Resin Market applications-will continue to support competitive pricing and performance advancements in the chemical anchoring sector through 2031.

Segmentation Analysis: Chemical Anchor Market

By Chemistry:

• Epoxy Resin Anchors: Offer the highest strength and resistance; ideal for heavy-duty industrial and infrastructure applications.
• Vinyl Ester Anchors: Balance strength and curing speed, making them suitable for high-volume commercial and residential projects; closely linked with growth in the Vinyl Ester Market.
• Polyester Anchors: Cost-effective solutions for light-to-medium load requirements.

By Application:

• Infrastructure (36.5% share): Dominated by bridges, tunnels, and public works where epoxy-based systems are preferred.
• Commercial & Industrial Construction (53.5% combined): Major drivers for the chemical anchoring market, particularly for HVAC, facade, and plant installations.
• Residential (10%): Growing with DIY and solar PV mounting applications.

By Region:

• APAC: Largest and fastest-growing region, with China and India leading demand.
• Europe: Focused on certified, sustainable anchoring products.
• North America: Adoption fueled by seismic and building safety codes.

This diverse segmentation underscores the chemical anchor's evolution from a contractor-specific product to a mainstream solution used across multiple building segments, strengthened by resin innovations from the Epoxy Vinyl Ester Resin Market.

Growth Drivers: Chemical Anchor Market

Infrastructure Expansion: Rising construction investments across APAC, Africa, and the Middle East.

Building Code Reinforcement: Stricter global standards drive certified anchor demand.

Technological Advancements: Hybrid epoxy-vinyl ester formulations enhance performance.

Sustainability Trends: Demand for low-VOC, styrene-free adhesives.

DIY & Solar Applications: Increasing use in residential improvement and renewable installations.

Together, these drivers reinforce the Chemical Anchor Market as a key enabler of modern construction, with the chemical anchoring market evolving toward more sustainable, faster-curing, and high-strength resin systems.

Growth Restraints: Chemical Anchor Market

High Material Costs: Epoxy and vinyl ester resins remain expensive compared to mechanical anchors.

Complex Installation: Requires skilled labor for consistent performance.

Temperature Sensitivity: Curing time and bond quality vary under extreme conditions.

Standardization Barriers: Regional certification differences (ETA, ICC, WRAS) complicate market access.

Raw Material Volatility: Fluctuations in resin and catalyst pricing affect production margins.

These factors collectively limit mass-scale adoption, particularly in emerging economies with low awareness of the advantages of the chemical anchoring market.

Competitive Landscape: Chemical Anchor Market

The global Chemical Anchor Market is moderately consolidated, dominated by Hilti, Sika, Fischer, and Rawlplug, which collectively control over 50% of total revenue. These leaders maintain competitive advantage through diversified product lines, certification compliance, and R&D investment in new resin chemistries.

Leading Players and Focus Areas:

• Hilti: High-performance epoxy anchors and digitally assisted installation tools.
• Sika: Innovation in styrene-free and vinyl ester anchor formulations.
• Fischer: Extensive range of fast-curing chemical and hybrid anchors.
• EJOT and Rawlplug: Focus on regional market penetration and DIY applications.

Emerging Trends:

• Material Innovation: Growth in the Epoxy Vinyl Ester Resin Market enhances formulation stability and performance.
• Sustainability and Certifications: Manufacturers prioritize ETA, LEED, and low-VOC compliance.
• Product Bundling: Integration of chemical anchors with complementary fixing systems and tools.
• Regional Expansion: Chinese and Indian manufacturers gaining share with cost-efficient offerings.

In the coming decade, competitive differentiation will rely on innovation in hybrid resin chemistry, digital installation assistance, and sustainability credentials. Companies that integrate expertise from the Vinyl Ester Market and Epoxy Vinyl Ester Resin Market into advanced anchoring systems will shape the next phase of the chemical anchoring market evolution.

Table of Contents

The Strategic Imperative 8™

Strategic Imperative for the Chemical Anchors Market

• Geopolitical Chaos
• Competitive Intensity
• Disruptive Technologies

Growth Opportunity Analysis, Chemical Anchors Market

• Introduction
• Technology Overview
• Formulas Without Styrene. Why?
• Growth Drivers and Restraints
• Growth Metrics
• Regional Data and Trends
• Key Companies and Market Concentration
• Certifications in the Chemical Anchors Market

Growth Opportunity Universe, Chemical Anchors

• Growth Opportunity 1: Residential Solar PV Self-Installation Kits
• Growth Opportunity 2: Growth of the DIY-Residential Improvement Segment
• Growth Opportunity 3: Growth of Hybrid Mass Timber
• Growth Opportunity 4: Association of Chemical Anchors with Complementary Products

Transformational Growth Journey

• Powered by the Growth Pipeline Engine™