Product Code: GVR-4-68038-487-1
Plastic To Fuel Market Growth & Trends:
The global plastic to fuel market size is expected to reach USD 2,693.8 million by 2030, expanding at a CAGR of 23.6% from 2024 to 2030, according to a new report by Grand View Research, Inc. Rising concerns about the hazardous impact of plastic waste and the pollution created as a result are handled through plastic to fuel conversion to keep the environment safe and to produce petroleum products.
Plastic is converted into different forms of energy (including fuel) and heat. The rising demand for petrol or diesel in transportation and jet airways is projected to be a key driver of the market. The growing population owing to urbanization and industrialization is also expected to propel the growth of the market over the forecast period.
Rising developments in the manufacturing industry to produce a high volume of fuel by increasing the production capacity of renewable fuel plants are anticipated to impel market growth over the next few years. In March 2017, the Diamond Green Diesel facility expanded its annual renewable diesel production capacity to 275.0 million gallons using Honeywell's UOP ecofining technology. Similar interest by other oil and gas giants such as Chevron and Enel are anticipated to drive the market.
The growing demand for fuel in the automotive industry is anticipated to drive the market over the forecast period. Intensive R&D and technological advancements are likely to propel the market in the emerging economies. The rising volume of residential and industrial plastic waste in developing countries such as India and China is projected to drive the market.
Governments have been dependent on landfills or incineration for plastic waste management in the past. However, the increasing demand for sustainable fuel has prompted industries to shift to the development of advanced technologies. Numerous waste management tools are employed on such waste to produce different forms of energy such as heat, electricity, fuel, and diesel, driving the overall market.
Plastic To Fuel Market Report Highlights:
- Pyrolysis technology was the largest technology segment held a share of over 80.84% in 2023
- The crude oil segment is anticipated to dominate the market due to growing demand from transportation industry and the crude oil segment accounted for the largest share of 60.31% in 2023
- Asia Pacific is anticipated to be the largest regional segment in 2023 accounting for 49.10% market share owing to large amount of plastic waste available and growing energy demand in the region
- New product launches, research and development, and technological collaborations are some of the strategic initiatives taken up by leading market players.
Table of Contents
Chapter 1. Methodology and Scope
- 1.1. Market Segmentation & Scope
- 1.2. Market Definition
- 1.3. Information Procurement
- 1.3.1. Purchased Database
- 1.3.2. GVR's Internal Database
- 1.3.3. Secondary Sources & Third-Party Perspectives
- 1.3.4. Primary Research
- 1.4. Information Analysis
- 1.4.1. Data Analysis Models
- 1.5. Market Formulation & Data Visualization
- 1.6. Data Validation & Publishing
Chapter 2. Executive Summary
- 2.1. Market Insights
- 2.2. Segmental Outlook
- 2.3. Competitive Outlook
Chapter 3. Plastic to Fuel Market Variables, Trends & Scope
- 3.1. Global Plastic to Fuel Market Outlook
- 3.2. Industry Value Chain Analysis
- 3.2.1. Raw Material Outlook
- 3.3. Technology Overview
- 3.4. Regulatory Framework
- 3.5. Market Dynamics
- 3.5.1. Market Driver Analysis
- 3.5.2. Market Restraint Analysis
- 3.5.3. Industry Challenges
- 3.6. Porter's Five Forces Analysis
- 3.6.1. Supplier Power
- 3.6.2. Buyer Power
- 3.6.3. Substitution Threat
- 3.6.4. Threat from New Entrant
- 3.6.5. Competitive Rivalry
- 3.7. PESTEL Analysis
- 3.7.1. Political Landscape
- 3.7.2. Economic Landscape
- 3.7.3. Social Landscape
- 3.7.4. Technological Landscape
- 3.7.5. Environmental Landscape
- 3.7.6. Legal Landscape
- 3.8. Market Lineage Outlook
- 3.8.1. Global Renewable Fuel Market Outlook
- 3.9. Penetration & Growth Prospect Mapping
- 3.10. Industry Value Chain Analysis
- 3.11. Technology Outlook
- 3.11.1. Technology trends
- 3.11.2. Sorting technologies
- 3.11.3. Recycling technologies
- 3.12. Regulatory Framework
- 3.12.1. U.S. regulations
- 3.12.2. Resource conservation and recovery act
- 3.12.3. EU regulations
- 3.12.4. EU plastics strategy
- 3.12.5. India regulations
- 3.12.6. China regulations
- 3.12.7. Australian regulations
- 3.13. Market Dynamics
- 3.13.1. Market driver impact analysis
- 3.13.1.1. Increasing plastic production and pollution
- 3.13.1.2. Favorable policies, initiatives, and regulatory framework for plastic recycling
- 3.14. Market restraint impact analysis
- 3.14.2.1. Technological challenges and high cost
- 3.13.2. Opportunity assessment
- 3.13.3. Industry challenges
- 3.6.4.1. Challenges Pertaining to Sorting and Pre-treatment
- 3.15. Business Environment Analysis: Plastic to Fuel Market
- 3.15.1. Industry analysis - PORTER'S
- 3.15.2. PESTLE analysis
- 3.15. Impact of COVID-19 on Plastic to Fuel Market
- 3.15.1. Market Challenges
- 3.15.2. Impact verdict - MEDIUM
Chapter 4. Plastic to Fuel Market: Technology Outlook Estimates & Forecasts
- 4.1. Plastic to Fuel Market: Technology Movement Analysis, 2023 & 2030
- 4.2. Pyrolysis
- 4.2.1. Market estimates and forecast, 2018 - 2030 (USD Million)
- 4.3. Depolymerization
- 4.3.1. Market estimates and forecast, 2018 - 2030 (USD Million)
- 4.4. Gasification
- 4.4.1. Market estimates and forecast, 2018 - 2030 (USD Million)
Chapter 5. Plastic to Fuel Market: Plastic Type Outlook Estimates & Forecasts
- 5.1. Plastic to Fuel Market: Plastic Type Movement Analysis, 2023 & 2030
- 5.2. Polyethylene
- 5.2.1. Market estimates and forecast, 2018 - 2030 (USD Million)
- 5.3. Polyethylene Terephthalate
- 5.3.1. Market estimates and forecast, 2018 - 2030 (USD Million)
- 5.4. Polypropylene
- 5.4.1. Market estimates and forecast, 2018 - 2030 (USD Million)
- 5.5. Polyvinyl Chloride
- 5.5.1. Market estimates and forecast, 2018 - 2030 (USD Million)
- 5.6. Polystyrene
- 5.6.1. Market estimates and forecast, 2018 - 2030 (USD Million)
- 5.7. Others
- 5.7.1. Market estimates and forecast, 2018 - 2030 (USD Million)
Chapter 6. Plastic to Fuel Market: Source Outlook Estimates & Forecasts
- 6.1. Plastic to Fuel Market: Source Movement Analysis, 2023 & 2030
- 6.2. Municipal Solid Waste (MSW)
- 6.2.1. Market estimates and forecast, 2018 - 2030 (USD Million)
- 6.3. Commercial & Industrial Waste
- 6.3.1. Market estimates and forecast, 2018 - 2030 (USD Million)
Chapter 7. Plastic to Fuel Market: End Fuel Outlook Estimates & Forecasts
- 7.1. Plastic to Fuel Market: End Fuel Movement Analysis, 2023 & 2030
- 7.2. Sulfur
- 7.2.1. Market estimates and forecast, 2018 - 2030 (USD Million)
- 7.3. Hydrogen
- 7.3.1. Market estimates and forecast, 2018 - 2030 (USD Million)
- 7.4. Crude Oil
- 7.4.1. Market estimates and forecast, 2018 - 2030 (USD Million)
- 7.5. Others
- 7.5.1. Market estimates and forecast, 2018 - 2030 (USD Million)
Chapter 8. Plastic to Fuel Market Regional Outlook Estimates & Forecasts
- 8.1. Regional Snapshot
- 8.2. Plastic to Fuel Market: Regional Movement Analysis, 2023 & 2030
- 8.3. North America
- 8.3.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.3.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.3.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.3.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.3.5. U.S.
- 8.3.5.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.3.5.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.3.5.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.3.5.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.3.6. Canada
- 8.3.6.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.3.6.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.3.6.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.3.6.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.3.7. Mexico
- 8.3.7.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.3.7.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.3.7.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.3.7.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.4. Europe
- 8.4.1.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.4.1.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.4.1.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.4.1.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.4.2. Germany
- 8.4.2.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.4.2.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.4.2.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.4.2.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.4.3. France
- 8.4.3.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.4.3.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.4.3.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.4.3.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.4.4. UK
- 8.4.4.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.4.4.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.4.4.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.4.4.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.4.5. Spain
- 8.4.5.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.4.5.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.4.5.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.4.5.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.4.6. Italy
- 8.4.6.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.4.6.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.4.6.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.4.6.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.4.7. The Netherlands
- 8.4.7.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.4.7.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.4.7.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.4.7.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.5. Asia Pacific
- 8.5.1.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.5.1.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.5.1.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.5.1.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.5.1.5. Market estimates and forecast, by end-use, 2018 - 2030 (USD Million)
- 8.5.2. China
- 8.5.2.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.5.2.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.5.2.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.5.2.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.5.3. India
- 8.5.3.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.5.3.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.5.3.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.5.3.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.5.4. Japan
- 8.5.4.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.5.4.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.5.4.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.5.4.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.5.5. Australia
- 8.5.5.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.5.5.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.5.5.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.5.5.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.5.6. South Korea
- 8.5.6.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.5.6.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.5.6.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.5.6.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.5.7. Vietnam
- 8.5.7.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.5.7.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.5.7.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.5.7.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.5.8. Singapore
- 8.5.8.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.5.8.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.5.8.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.5.8.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.5.9. Indonesia
- 8.5.9.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.5.9.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.5.9.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.5.9.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.6. Central & South America
- 8.6.1. Brazil
- 8.6.1.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.6.1.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.6.1.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.6.1.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.6.2. Argentina
- 8.6.2.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.6.2.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.6.2.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.6.2.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.7. Middle East & Africa
- 8.7.1.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.7.1.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.7.1.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.7.1.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.7.2. Saudi Arabia
- 8.7.2.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.7.2.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.7.2.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.7.2.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
- 8.7.3. UAE
- 8.7.3.1. Market estimates and forecast, by technology, 2018 - 2030 (USD Million)
- 8.7.3.2. Market estimates and forecast, by plastic type, 2018 - 2030 (USD Million)
- 8.7.3.3. Market estimates and forecast, by source, 2018 - 2030 (USD Million)
- 8.7.3.4. Market estimates and forecast, by end fuel, 2018 - 2030 (USD Million)
Chapter 9. Competitive Landscape
- 9.1. Recent Developments & Impact Analysis, By Key Market Participants
- 9.2. Company Categorization
- 9.3. Participants Overview
- 9.4. Financial Performance
- 9.5. Product Benchmarking
- 9.6. Company Market Positioning
- 9.7. Company Heat Map Analysis
- 9.8. Strategy Mapping
- 9.9. Company Profiles/Listing
- 9.9.1. Plastic2oil
- 9.9.1.1. Company Overview
- 9.9.1.2. Financial Performance
- 9.9.1.3. Product Benchmarking
- 9.9.2. Alterra Energy
- 9.9.2.1. Company Overview
- 9.9.2.2. Financial Performance
- 9.9.2.3. Product Benchmarking
- 9.9.3. Neste
- 9.9.3.1. Company Overview
- 9.9.3.2. Financial Performance
- 9.9.3.3. Product Benchmarking
- 9.9.4. Nexus Circular.
- 9.9.4.1. Company Overview
- 9.9.4.2. Financial Performance
- 9.9.4.3. Product Benchmarking
- 9.9.5. BRADAM Group, LLC.
- 9.9.5.1. Company Overview
- 9.9.5.2. Financial Performance
- 9.9.5.3. Product Benchmarking
- 9.9.6. Brightmark LLC
- 9.9.6.1. Company Overview
- 9.9.6.2. Financial Performance
- 9.9.6.3. Product Benchmarking
- 9.9.7. Klean Industries
- 9.9.7.1. Company Overview
- 9.9.7.2. Financial Performance
- 9.9.7.3. Product Benchmarking
- 9.9.8. Beston (Henan) Machinery Co. Ltd
- 9.9.8.1. Company Overview
- 9.9.8.2. Financial Performance
- 9.9.8.3. Product Benchmarking
- 9.9.9. Plastic Energy
- 9.9.9.1. Company Overview
- 9.9.9.2. Financial Performance
- 9.9.9.3. Product Benchmarking
- 9.9.10. Agilyx Inc.
- 9.9.10.1. Company Overview
- 9.9.10.2. Financial Performance
- 9.9.10.3. Product Benchmarking