查看购物车
  • Traditional Chinese
  • English
  • Japanese
封面
市场调查报告书
商品编码
1456989

全球预製模组化资料中心市场：2024年至2029年预测

Global Prefabricated Modular Data Center Market - Forecasts from 2024 to 2029
出版日期: | 出版商: Knowledge Sourcing Intelligence | 英文 140 Pages | 商品交期: 最快1-2个工作天内

价格
简介目录

全球预製模组化资料中心市场预计复合年增长率为9.82%，市场规模从2022年的36.5亿美元增至2029年的70.31亿美元。

医疗保健、银行/金融、通讯/科技等各行业的数位化正在快速进展，巨量资料量不断增加。因此，需要降低与资料的适当管理、控制和储存相关的成本，这是由于网路流量和网路服务使用的增加。利用模组化设施来降低传统设施复杂性的趋势不断增长，这推动了对预製模组化资料中心的需求。模组化资料中心不仅价格便宜且易于部署，而且可以提供有效且有效率的资料储存。

对节能基础设施的需求不断增长

随着许多企业采用预製设施来简化 IT 营运并提高效能，对节能和可携式IT基础设施的需求不断增长，进一步推动了预製模组化资料中心市场的全球成长。此外，与大型设施相比，这些设施具有更有效率的电力和冷却功能，因为内建的通道遏制减少了热空气和冷空气的混合。

全球预製模组化资料中心市场的市场开拓正在透过结合节能技术来开发环境永续的解决方案。例如，华为技术有限公司推出了一款名为「FusionModule1,000B预製模组化资料中心」的产品。这种预製资料中心模组可以使用简单、绿色、可靠的电源加环境系统轻鬆容纳、管理和供电最新的资讯技术 (IT) 和通讯技术 (CT) 设备。相容于交流、直流电，整合水、风冷插口系统和整合供电系统，节省能源，降低成本。其他功能包括自动灭火和侦测系统，以减少火灾威胁并保护储存的资料，以及智慧管理系统，以有效管理基础设施设备。

此外，2023 年 2 月，Vertiv 向欧洲、中东和非洲 (Europe, Middle East, and Africa) 市场推出了 Vertiv MegaMod 和 Vertiv MegaMod Plus承包预製模组化 (PFM)资料中心解决方案。

适用于高达 2 MW 或以上 IT 负载的优质预製模组可部署在 0.5 MW 或 1 MW 可扩充单元中。这些模组经过测试，并与 Vertiv 业界领先的电源管理系统、IT 设备机架、温度控管程序和远程监控集成，可提供卓越的性能，与传统资料中心建设相比，卓越的性能可减少高达40%的部署时间。您可以在欧洲、中东和非洲（Europe, Middle East and Africa）存取此解决方案。

一体机将在预测期内显着成长

一体式解决方案在各个行业中越来越多地采用，是因为一体式解决方案可以提供更好和增强的功能，并且能够处理各种应用。此外，这种配置效率更高，功耗更低，有助于组织实现可扩展性。

北美和欧洲在全球预製模组化资料中心市场中占据主要份额

全球预製模组化资料中心市场分为北美、南美、欧洲、中东和非洲、亚太地区五个地区。北美预製模组化资料将在 2022 年占据重要的市场占有率，并预计在预测期内实现高速成长。这种增长归因于新技术的早期采用以及该地区主要市场参与企业的存在。美国和加拿大等国家各行业预製模组化资料中心的高采用率以维持庞大的资料量，进一步促进了该地区的市场成长。

在欧洲地区，正在增加投资以提高各个最终用户行业预製资料中心的采用率，以满足资料管理和储存要求，从而推动该区域市场的成长。例如，最近的2020年3月，全球基础设施解决方案供应商Vertiv宣布推出预製模组化资料中心。该中心因实现性能弹性而获得了 Uptime Institute 的 TIER-Ready 头衔。 Vertiv 全新经过 TIER-Ready 认证的预製资料中心模组现已在欧洲和中东/非洲地区上市。

Vertiv 也参与了 TIER-Ready 合作伙伴关係，这是 Vertiv 与 Uptime Institute 之间的策略协议。根据该合作协议，Uptime Institute将对预製模组的特定型号进行审查，这些模组必须满足TIER拓扑标准的严格要求。此外，作为该协议的一部分，Vertiv 完成了 Uptime Institute 对新产品 Smart Mod PFM 的 TIER-readyIII 设计审查。

推出主要市场

  • 2023 年 11 月，全球关键数位基础设施和连续性解决方案供应商 Vertiv 宣布推出预製模组化资料中心，旨在满足快速部署运算日益增长的需求。这种适应性强且可扩展的解决方案采用冷冻水冷却来最大限度地减少对环境的影响并提高能源效率，并且可以在单一系统中处理高达 200kW 的 IT 负载。该解决方案现已在北美推出。与传统资料中心建设相比，SmartModTM Max CW在工厂组装和测试，可以更快部署并减少现场准备和成本。还提供各种系统客製化选项，包括模组尺寸、机架数量和尺寸、冷却和电源容量。
  • 2022 年 1 月：在中国西北部建立一个新设施，以因应游客行动资料的成长。工厂建造并预製了设备，并将新资料中心划分为232个模组。随后，现场将预先准备好的模组进行组装。全新大楼共有5层。由于该地区气候寒冷，采用华为Fusion Call间接蒸发冷却技术的资料中心全年可实现约10个月的自然冷却。
  • 2022 年 9 月：Vertiv 在印度推出模组化资料中心基础设施服务，包括预製模组化资料中心。此整合解决方案是专为 IT 资产部署而设计的适应性强的平台，也是一种快速、轻鬆的容量部署方法。此外，简单的可扩展性使资料中心营运商能够从满足其即时需求的解决方案开始，并根据需要增加容量。 Vertiv 的预製模组化资料中心利用监控、关键电源和热控制功能。

目录

第一章 简介

  • 市场概况
  • 市场定义
  • 调查范围
  • 市场区隔
  • 货币
  • 先决条件
  • 基准年和预测年时间表
  • 相关人员的主要利益

第二章调查方法

  • 研究设计
  • 调查过程

第三章执行摘要

  • 主要发现
  • CXO观点

第四章市场动态

  • 市场驱动因素
  • 市场限制因素
  • 波特五力分析
  • 产业价值链分析
  • 分析师观点

第 5 章：全球预製模组化资料中心市场：按配置

  • 介绍
  • 半预製
  • 完全预製
  • 一体

第 6 章：全球预製模组化资料中心市场：按外形尺寸

  • 介绍
  • ISO
  • 外壳
  • 撬装

第 7 章：全球预製模组化资料中心市场：按行业分类

  • 介绍
  • 银行与金融服务 (BFSI)
  • 製造业
  • 通讯和技术
  • 医疗保健
  • 媒体和娱乐
  • 其他的

第八章全球预製模组化资料中心市场：按地区

  • 介绍
  • 北美洲
  • 南美洲
  • 欧洲
  • 中东/非洲
  • 亚太地区

第九章竞争环境及分析

  • 主要企业及策略分析
  • 市场占有率分析
  • 合併、收购、协议和合作
  • 竞争对手仪表板

第十章 公司简介

  • Dell Inc
  • Hewlett Packard Enterprise Development LP
  • Emerson Electric Co.
  • Lightning Investors LLC（Colt Group Holdings Limited）
  • Schneider Electric
  • Cannon Technologies
  • Eltek
  • Vertiv Group Corp.
  • Huawei Technologies Co., Ltd
  • IBM
简介目录
Product Code: KSI061610007

The global prefabricated modular data centre market is expected to grow at a CAGR of 9.82%, reaching a market size of US$7.031 billion in 2029 from US$3.650 billion in 2022.

The rapid adoption of digitalization in various industries such as healthcare, banking and finance, and communications and technology has increased the volume of big data. As such, there is a need to reduce the cost associated with the proper management, control, and storage of data, which is attributable to the increasing internet traffic and internet service usage. The growing trend of using modular facilities to reduce the complexity of traditional facilities is increasing demand for prefabricated modular data centres, which are not only less expensive and easier to deploy but also provide effective and efficient data storage.

Increasing demand for energy-efficient infrastructure

An increase in the demand for energy-efficient and portable IT infrastructure is further bolstering the market growth of the prefabricated modular data centre market globally as many enterprises are incorporating prefabricated facilities that streamline their IT operations while enhancing performance. Moreover, these facilities provide more efficient power and cooling as compared to large-scale facilities since they have a built-in aisle containment that reduces hot and cold air mixing.

Market players in the global prefabricated modular data centre market are developing environmentally sustainable solutions by incorporating energy-efficient technologies. For example, Huawei Technologies Co., Ltd. offers a product called the "FusionModule1000B Prefabricated Modular Data Center". This prefabricated data centre module is an enhanced solution that can facilitate the housing, management, and provision of power to modern Information Technology (IT) and Communication Technology (CT) equipment by using a simple, green, and reliable power-plus environment system. It can support both alternating current and direct current due to the inclusion of an integrated power system coupled with an integrated water-cooled and air-cooled in-row system that saves energy and reduces cost. Some of the additional features include an automatic fire suppression and detection system, which mitigates the threat of fires, thus protecting the data stored, and an intelligent management system for the effective management of infrastructure facilities.

Further, in February 2023, Vertiv introduced its turnkey prefabricated modular (PFM) data centre solutions, the Vertiv MegaMod and Vertiv MegaMod Plus, to the European, Middle Eastern, and African (EMEA) markets.

For IT loads up to two megawatts or more, the premium prefabricated modules can be deployed in expandable units of 0.5 or 1 megawatts. They are tested and integrated with industry-leading Vertiv power management systems, IT equipment racks, thermal management programs, and remote monitoring to provide outstanding performance and assist businesses in cutting deployment times by up to 40% when compared to a conventional data center build. All of Europe, the Middle East, and Africa (EMEA) can access the solutions.

All-in-one to witness a substantial growth rate during the forecast period

All-in-one is expected to grow at a considerable CAGR over the forecast period, which is attributable to the increasing adoption of all-in-one solutions in various industries as it can provide much better and enhanced features coupled with the ability to cater to a wide variety of applications. Moreover, this configuration helps organizations achieve scalability as it is more efficient and requires less power consumption

North America and Europe hold significant shares in the global prefabricated modular data centre market

The global prefabricated modular data centre market is divided into five regions: North America, South America, Europe, the Middle East and Africa (MEA), and Asia Pacific (APAC). The North American prefabricated modular data accounted for a significant market share in 2022 and is expected to grow at a high rate during the forecast period. This growth is attributed to the early adoption of new technologies coupled with the presence of major market players in the region. The high adoption rate of prefabricated modular data centres across different industries in countries like the U.S. and Canada to maintain a huge volume of data is further contributing to the market growth in this region.

Increasing investments in the European region to boost the adoption rate of prefabricated data centres in various end-user industries to meet their data management and storage requirements are fueling the growth of this regional market. For instance, recently in March 2020, Vertiv, a company dealing in the provision of infrastructure solutions globally, announced the launch of a prefabricated modular data centre, which has been awarded the TIER-Ready designation laid down by the Uptime Institute to achieve performance resiliency. The new and TIER-Ready certified prefabricated data centre module by Vertiv has been made available in Europe and the Middle East and Africa region.

Also, Vertiv is involved in a TIER-Ready Partnership, which is a strategic agreement between Vertiv and Uptime Institute. Under this partnership agreement, the Uptime Institute is going to carry out reviews on some of the specific models of prefabricated modules, those that need to meet the stringent requirements of the TIER Standard of Topology. Furthermore, as a part of this agreement, Vertiv has also completed an Uptime Institute TIER-ready III design review for its new product, the "Smart Mod PFM".

Product Offerings

  • SE Prefabricated Data Hall: SE Scalable prefabricated IT infrastructure is made up of factory-built IT modules that are quickly and easily assembled on-site to create a sizable, useful IT room. Service providers and enterprise customers implementing IT in 50 to 200 rack increments have the opportunity to scale up swiftly while having the on-site installation greatly simplified with the help of prefabricated data halls. As a standalone system with physical protection, redundant power and cooling, and the ability to be remotely monitored and managed with the full suite of EcoStruxure software, the data center can be placed outside or inside a conventional building shell.
  • Huawei FusionDC: Huawei's advanced series of data centre infrastructure products, pre-integrated intelligent thermal management system, intelligent energy supply and distribution network, lithium battery system, fire extinguishing system, and intelligent management software are all included in the Huawei FusionDC prefabricated modular data centre solution. These features make it easier for customers to construct simple and direct, eco-friendly, smart, and dependable data centres. Rapid deployment, lower initial investment, elastic capacity growth, and intelligent O&M are all special benefits of Huawei FusionDC. It can successfully handle the difficulties posed by the rapid expansion of cloud, AI, and 5G services in the data centre construction industry.

Market key launches

  • In November 2023, Vertiv, a global supplier of solutions for critical digital infrastructure and continuity, unveiled VertivTM SmartModTM Max CW today, a prefabricated modular data centre made to meet the increasing need for compute to be deployed quickly. This adaptable and expandable solution uses chilled water cooling to minimize its environmental effect and increase energy efficiency, and it can handle up to 200kW of total IT load in a single system. North America now has access to the solution. Compared to traditional data centre construction, the SmartModTM Max CW is assembled and tested in the factory, allowing for faster deployment and lower on-site preparation and cost. A variety of customization options are also available for the system, such as module dimensions, number and size of racks, and cooling and power capacities.
  • In January 2022: to manage an increase in mobile data induced by tourists, a new facility was set up in the northwest of China. A factory constructed and prefabricated the equipment, dividing the new data centre into 232 modules. The modules were then put together on-site when the preliminary preparation was finished. The brand-new building has five stories. Due to the cold local climate, the data centre, which uses Huawei's FusionCol indirect evaporative cooling, can be naturally cooled for roughly 10 months out of the year.
  • In September 2022: Vertiv introduced its modular data centre infrastructure services, including prefabricated modular data centres, in India. The integrated solutions provide a quick and easy approach to installing capacity while being adaptable platforms that are designed for the deployment of IT assets. Additionally, they offer simple scalability, enabling the data centre operator to commence with a solution that fulfils immediate needs and to increase capacity as necessary. The prefabricated modular data centres from Vertiv make use of their surveillance and control, critical power, and thermal control capabilities.

Segmentation:

By Configuration

  • Semi-prefabricated
  • Fully-prefabricated
  • All-in-one

By Form Factor

  • ISO
  • Enclosure
  • Skid-Mounted

By Industry Vertical

  • Banking and Financial Services (BFSI)
  • Manufacturing
  • Communications and Technology
  • Healthcare
  • Media and Entertainment
  • Others

By Geography

  • North America
  • USA
  • Canada
  • Mexico
  • South America
  • Brazil
  • Argentina
  • Others
  • Europe
  • Germany
  • France
  • United Kingdom
  • Spain
  • Others
  • Middle East and Africa
  • UAE
  • Saudi Arabia
  • Israel
  • Others
  • Asia Pacific
  • China
  • Japan
  • India
  • South Korea
  • Taiwan
  • Thailand
  • Indonesia
  • Others

TABLE OF CONTENTS

1. INTRODUCTION

  • 1.1. Market Overview
  • 1.2. Market Definition
  • 1.3. Scope of the Study
  • 1.4. Market Segmentation
  • 1.5. Currency
  • 1.6. Assumptions
  • 1.7. Base, and Forecast Years Timeline
  • 1.8. Key Benefits to the Stakeholder

2. RESEARCH METHODOLOGY

  • 2.1. Research Design
  • 2.2. Research Processes

3. EXECUTIVE SUMMARY

  • 3.1. Key Findings
  • 3.2. CXO Perspective

4. MARKET DYNAMICS

  • 4.1. Market Drivers
  • 4.2. Market Restraints
  • 4.3. Porter's Five Forces Analysis
    • 4.3.1. Bargaining Power of Suppliers
    • 4.3.2. Bargaining Power of Buyers
    • 4.3.3. Threat of New Entrants
    • 4.3.4. Threat of Substitutes
    • 4.3.5. Competitive Rivalry in the Industry
  • 4.4. Industry Value Chain Analysis
  • 4.5. Analyst View

5. GLOBAL PREFABRICATED MODULAR DATA CENTER MARKET, BY CONFIGURATION

  • 5.1. Introduction
  • 5.2. Semi-Prefabricated
    • 5.2.1. Market Trends and Opportunities
    • 5.2.2. Growth Prospects
    • 5.2.3. Geographic Lucrativeness
  • 5.3. Fully-Prefabricated
    • 5.3.1. Market Trends and Opportunities
    • 5.3.2. Growth Prospects
    • 5.3.3. Geographic Lucrativeness
  • 5.4. All-In-One
    • 5.4.1. Market Trends and Opportunities
    • 5.4.2. Growth Prospects
    • 5.4.3. Geographic Lucrativeness

6. GLOBAL PREFABRICATED MODULAR DATA CENTER MARKET, BY FORM FACTOR

  • 6.1. Introduction
  • 6.2. ISO
    • 6.2.1. Market Trends and Opportunities
    • 6.2.2. Growth Prospects
    • 6.2.3. Geographic Lucrativeness
  • 6.3. Enclosure
    • 6.3.1. Market Trends and Opportunities
    • 6.3.2. Growth Prospects
    • 6.3.3. Geographic Lucrativeness
  • 6.4. Skid-Mounted
    • 6.4.1. Market Trends and Opportunities
    • 6.4.2. Growth Prospects
    • 6.4.3. Geographic Lucrativeness

7. GLOBAL PREFABRICATED MODULAR DATA CENTER MARKET, BY INDUSTRY VERTICAL

  • 7.1. Introduction
  • 7.2. Banking and Financial Services (BFSI)
    • 7.2.1. Market Trends and Opportunities
    • 7.2.2. Growth Prospects
    • 7.2.3. Geographic Lucrativeness
  • 7.3. Manufacturing
    • 7.3.1. Market Trends and Opportunities
    • 7.3.2. Growth Prospects
    • 7.3.3. Geographic Lucrativeness
  • 7.4. Communications and Technology
    • 7.4.1. Market Trends and Opportunities
    • 7.4.2. Growth Prospects
    • 7.4.3. Geographic Lucrativeness
  • 7.5. Healthcare
    • 7.5.1. Market Trends and Opportunities
    • 7.5.2. Growth Prospects
    • 7.5.3. Geographic Lucrativeness
  • 7.6. Media and Entertainment
    • 7.6.1. Market Trends and Opportunities
    • 7.6.2. Growth Prospects
    • 7.6.3. Geographic Lucrativeness
  • 7.7. Others
    • 7.7.1. Market Trends and Opportunities
    • 7.7.2. Growth Prospects
    • 7.7.3. Geographic Lucrativeness

8. GLOBAL PREFABRICATED MODULAR DATA CENTER MARKET, BY GEOGRAPHY

  • 8.1. Introduction
  • 8.2. North America
    • 8.2.1. By Configuration
    • 8.2.2. By Form Factor
    • 8.2.3. By Industry Vertical
    • 8.2.4. By Country
      • 8.2.4.1. USA
        • 8.2.4.1.1. Market Trends and Opportunities
        • 8.2.4.1.2. Growth Prospects
      • 8.2.4.2. Canada
        • 8.2.4.2.1. Market Trends and Opportunities
        • 8.2.4.2.2. Growth Prospects
      • 8.2.4.3. Mexico
        • 8.2.4.3.1. Market Trends and Opportunities
        • 8.2.4.3.2. Growth Prospects
  • 8.3. South America
    • 8.3.1. By Configuration
    • 8.3.2. By Form Factor
    • 8.3.3. By Industry Vertical
    • 8.3.4. By Country
      • 8.3.4.1. Brazil
        • 8.3.4.1.1. Market Trends and Opportunities
        • 8.3.4.1.2. Growth Prospects
      • 8.3.4.2. Argentina
        • 8.3.4.2.1. Market Trends and Opportunities
        • 8.3.4.2.2. Growth Prospects
      • 8.3.4.3. Others
        • 8.3.4.3.1. Market Trends and Opportunities
        • 8.3.4.3.2. Growth Prospects
  • 8.4. Europe
    • 8.4.1. By Configuration
    • 8.4.2. By Form Factor
    • 8.4.3. By Industry Vertical
    • 8.4.4. By Country
      • 8.4.4.1. Germany
        • 8.4.4.1.1. Market Trends and Opportunities
        • 8.4.4.1.2. Growth Prospects
      • 8.4.4.2. France
        • 8.4.4.2.1. Market Trends and Opportunities
        • 8.4.4.2.2. Growth Prospects
      • 8.4.4.3. UK
        • 8.4.4.3.1. Market Trends and Opportunities
        • 8.4.4.3.2. Growth Prospects
      • 8.4.4.4. Spain
        • 8.4.4.4.1. Market Trends and Opportunities
        • 8.4.4.4.2. Growth Prospects
      • 8.4.4.5. Others
        • 8.4.4.5.1. Market Trends and Opportunities
        • 8.4.4.5.2. Growth Prospects
  • 8.5. Middle East and Africa
    • 8.5.1. By Configuration
    • 8.5.2. By Form Factor
    • 8.5.3. By Industry Vertical
    • 8.5.4. By Country
      • 8.5.4.1. Saudi Arabia
        • 8.5.4.1.1. Market Trends and Opportunities
        • 8.5.4.1.2. Growth Prospects
      • 8.5.4.2. UAE
        • 8.5.4.2.1. Market Trends and Opportunities
        • 8.5.4.2.2. Growth Prospects
      • 8.5.4.3. Israel
        • 8.5.4.3.1. Market Trends and Opportunities
        • 8.5.4.3.2. Growth Prospects
      • 8.5.4.4. Others
        • 8.5.4.4.1. Market Trends and Opportunities
        • 8.5.4.4.2. Growth Prospects
  • 8.6. Asia Pacific
    • 8.6.1. By Configuration
    • 8.6.2. By Form Factor
    • 8.6.3. By Industry Vertical
    • 8.6.4. By Country
      • 8.6.4.1. China
        • 8.6.4.1.1. Market Trends and Opportunities
        • 8.6.4.1.2. Growth Prospects
      • 8.6.4.2. Japan
        • 8.6.4.2.1. Market Trends and Opportunities
        • 8.6.4.2.2. Growth Prospects
      • 8.6.4.3. India
        • 8.6.4.3.1. Market Trends and Opportunities
        • 8.6.4.3.2. Growth Prospects
      • 8.6.4.4. South Korea
        • 8.6.4.4.1. Market Trends and Opportunities
        • 8.6.4.4.2. Growth Prospects
      • 8.6.4.5. Taiwan
        • 8.6.4.5.1. Market Trends and Opportunities
        • 8.6.4.5.2. Growth Prospects
      • 8.6.4.6. Thailand
        • 8.6.4.6.1. Market Trends and Opportunities
        • 8.6.4.6.2. Growth Prospects
      • 8.6.4.7. Indonesia
        • 8.6.4.7.1. Market Trends and Opportunities
        • 8.6.4.7.2. Growth Prospects
      • 8.6.4.8. Others
        • 8.6.4.8.1. Market Trends and Opportunities
        • 8.6.4.8.2. Growth Prospects

9. COMPETITIVE ENVIRONMENT AND ANALYSIS

  • 9.1. Major Players and Strategy Analysis
  • 9.2. Market Share Analysis
  • 9.3. Mergers, Acquisitions, Agreements, and Collaborations
  • 9.4. Competitive Dashboard

10. COMPANY PROFILES

  • 10.1. Dell Inc
  • 10.2. Hewlett Packard Enterprise Development LP
  • 10.3. Emerson Electric Co.
  • 10.4. Lightning Investors LLC (Colt Group Holdings Limited)
  • 10.5. Schneider Electric
  • 10.6. Cannon Technologies
  • 10.7. Eltek
  • 10.8. Vertiv Group Corp.
  • 10.9. Huawei Technologies Co., Ltd
  • 10.10. IBM