查看购物车
  • Traditional Chinese
  • English
  • Japanese
  • Korean
封面
市场调查报告书
商品编码
1533030

预製建筑系统市场－2024年至2029年预测

Prefabricated Building Systems Market - Forecasts from 2024 to 2029
出版日期: | 出版商: Knowledge Sourcing Intelligence | 英文 144 Pages | 商品交期: 最快1-2个工作天内

价格
简介目录

预製建筑系统市场预计在预测期内复合年增长率为 8.58%。

由于更快的施工作业、降低的人事费用、最大限度地减少劳动力和异地製造等优势，预製建筑系统市场预计将成长。异地製造的预製建筑系统主要分为三种：

  • 模组化（体积）结构涉及製造自足式单元并将其组装到现场进行组装。
  • 面板结构在异地工厂製造为平板单元并运送到现场。
  • 混合预製建筑（半体积）是紧凑的模组化单元（吊舱），用于厨房和浴室等区域。

可调式模组化房屋的优点是：

  • 模组化住宅的可塑性使它们易于组装以创建不同的房间。建造的住宅是可移动的，可以拆除并运送到新地点。

推动预製建筑系统市场的关键因素是住宅建设产业需求的增加、商业空间的需求、对绿色建筑日益增长的兴趣以及新的 3D 建筑技术。

  • 2022年欧盟建筑业附加价值毛额5.5%。欧盟成员国中比例最高的是奥地利（7.3%）、芬兰和罗马尼亚（皆为7.0%）。 2022年住宅投资占GDP的5.9%。投资最高的是塞浦路斯，为 8.6%，德国为 7.3%，芬兰为 7.2%，法国为 7.1%。
  • 2010年至2022年，23个欧盟成员国核准兴建的住宅数量增加。保加利亚几乎翻了两番，其次是爱沙尼亚和马耳他。保加利亚成长了 277%，爱沙尼亚成长了 162%，马耳他成长了 118%。
  • 根据美国人口普查局的数据，2022 年新建住宅建设许可地区的许可住宅单位年增率为 20,182 套，2023 年为 18,217 套。

预製建筑系统市场驱动因素：

  • 住宅建筑领域增加

在全球范围内，由于亚太地区的经济成长、西方国家无家可归的贫困阶级对经济适用住宅的需求以及都市化环境中住宅的上涨，对住宅建筑的需求正在显着增加。西班牙的免费住宅数量将从 2022 年的 96,996 套大幅增加到 2023 年的 98,040 套。西班牙免费住宅建设的增加是由于该国许多地区，特别是旅游胜地的住宅上涨。

住宅需求的激增将导致对快速且易于建造的模组化建筑的需求增加。与传统建筑相比，模组化建筑更便宜，产生的废弃物也更少。

  • 绿建筑意识不断增强

装配式建筑系统是解决建设产业相关环境问题的一个很好的解决方案。建设业产生废弃物，并增加了世界能源消耗、废弃物产生和二氧化碳排放。大部分废弃物最终掩埋，造成进一步的环境破坏。另一方面，组装式建筑由于采用节能技术和设备製造，比传统建筑需要更少的能源。製造过程在受控环境中进行，优化材料并最大限度地减少废弃物。

预製建筑的组装更快，并且将材料运送到施工现场所需的能源更少。它们的结构通常被设计为节能的，具有高性能隔热材料和 HVAC 系统等功能，需要更少的能量来加热和冷却。

  • 非住宅建筑的需求

Purcell Construction 生产连接工厂覆层的面板系统，由于技术创新，商业建筑对预製建筑系统的需求不断增加。这些成品外墙板使建筑物具有耐候性。这样可以防止风雨对建筑物造成损坏。它还降低了鹰架成本并缩短了 MEP 的准备时间。其他好处包括安全和品管。

BOXX 模组化商业建筑为行动办公室、混合办公室和自订办公室提供解决方案。它用于多个最终用户行业，包括紧急和灾难应变、化学、生物技术、製药、运输、采矿、混凝土、采石、建筑、製造和废弃物管理。

  • 对 3D住宅的需求不断增长

由于世界都市化不断加快，3D住宅在未来几年可能会成长。据信大部分需求来自开发中国家。需要模组化 3D 列印建筑来应对易受气候变迁风险影响的新兴国家城市经济适用住宅的挑战。 3D 列印机可以为低收入者建造可调节、经济实惠且具有气候适应性的住宅。

预製 3D 列印模组化住宅是其组件在受控环境中列印并在现场组装的结构。各种类型的 3D 列印模组化住宅套件正在製造中，并且正在进行投资和研究来开发该技术。根据瓦赫宁根大学的一项研究，3D 技术可以透过提高建筑效率来降低 35% 的总建筑成本。由于施工所需人员减少，人事费用降低，培训和技术开发成本也降低。此外，与传统施工方法相比，材料用量可减少40%。

装配式建筑系统市场的地理前景

  • 在预测期内，亚太地区将主导预製建筑系统市场。

中国、日本、印度、韩国等主要经济体在亚太地区占据主导地位。东南亚国协等快速发展的新兴国家也属于这一地区。印度和中国是该地区的重要参与者。

印度计划从2024财年到2030财年在基础建设领域投资17,230亿美元。它专注于电力、道路、可再生能源和电动车等工业发展。在航空领域，机场数量已达149个，印度航空公司订购了1,000多架新飞机。 2024年3月，建筑开发直接投资达339.1亿美元。

即使经历了2021年的房地产动盪，中国仍然是最大的房地产成长和开拓市场。新的机会在于政策决策，例如到 2022 年新建都市区建筑将获​​得绿色建筑认证。这包括学校、医院、博物馆、体育场馆、保障性住宅以及面积超过2万平方公尺的单体建筑等公共设施。预製建筑系统在建筑和建筑行业的应用预计将在该地区出现强劲增长。

装配式建筑系统市场限制因素：

  • 预製化有接缝薄弱、保温性能差等技术问题，需要进一步的技术创新与发展。预计这将阻碍市场成长。

预製建筑系统市场的主要发展：

  • 2024年1月，Consolis将在荷兰建造一座新工厂。该工厂的生产能力为每年200万平方公尺中空板。包括自动化在内的高科技工业化流程将有助于维持品质和永续性。 Consolis VBI 已在荷兰拥有七个生产基地，目前正在扩大其生产能力，在 Koudekerk an den Rijn 建立一个新生产基地。 Consolis VBI 是预製空心板领域的领先公司。 Koudekerk aan den Rijn 地区位于荷兰西部，预计未来几年将建造许多住宅和公寓。
  • 2023 年 9 月，预製绿住宅建筑技术新兴企业Mighty Buildings 宣布在由 Waed Ventures 和 Bold Capital 共同主导、Khosla Ventures I 参与的一轮资金筹措中筹集了 5,200 万美元。 Mighty Buildings 使用独特的印刷材料。它由 60% 的再生玻璃製成，强度是混凝土的五倍，重量减轻 70%，碳排放更低。
  • 2022 年 10 月，CyBe 宣布在埃因霍温建造第一座采用 3D 技术的四层建筑。 CyBe 与埃因霍温的 Lab040 合作，使用专有硬体、软体和列印材料建造了第一座 3D 列印的四层公寓大楼。
  • 2022 年 7 月，Skyline Champion Corporation 子公司 Champion Retail Housing 宣布收购 Alta Cima Corporation。收购位于美国 12 个 Skyline Champion 製造工厂的 Factory Expo Home Centers 资产并承担营运。该公司拥有领先的製造和模组化住宅、ADU、公园模型和模组化建筑产品组合，适用于单户、多用户住宅和酒店业。

预製建筑系统市场细分与分析如下：

按尺寸

  • 骨架系统
  • 面板系统
  • 蜂窝系统
  • 复杂系统

按成分

  • 金属
  • 非金属
  • 其他的

按最终用户产业

  • 住宅
  • 商业的
  • 基础设施
  • 其他的

按地区

  • 北美洲
  • 美国
  • 加拿大
  • 墨西哥
  • 南美洲
  • 巴西
  • 阿根廷
  • 南美洲其他地区
  • 欧洲
  • 英国
  • 德国
  • 法国
  • 义大利
  • 西班牙
  • 其他欧洲国家
  • 中东/非洲
  • 沙乌地阿拉伯
  • UAE
  • 其他中东/非洲
  • 亚太地区
  • 中国
  • 印度
  • 日本
  • 韩国
  • 台湾
  • 泰国
  • 印尼
  • 其他亚太地区

目录

第一章简介

  • 市场概况
  • 市场定义
  • 调查范围
  • 市场区隔
  • 货币
  • 先决条件
  • 基准年和预测年时间表
  • 相关人员的主要利益

第二章调查方法

  • 研究设计
  • 调查过程

第三章执行摘要

  • 主要发现
  • 分析师观点

第四章市场动态

  • 市场驱动因素
    • 住宅领域的成长
    • 绿建筑意识不断增强
    • 非住宅建筑需求
    • 对 3D住宅的需求不断增长
  • 市场限制因素
    • 因此，技术问题需要进一步创新和发展。
  • 波特五力分析
  • 产业价值链分析

第五章预製建筑系统市场：依维度

  • 介绍
  • 骨架系统
  • 面板系统
  • 细胞系统
  • 复杂系统

第六章预製建筑系统市场：依组成部分

  • 介绍
  • 金属
  • 非金属
  • 其他的

第七章预製建筑系统市场：依最终使用者产业

  • 介绍
  • 住宅
  • 商业的
  • 基础设施
  • 其他的

第八章预製建筑系统市场：依地区

  • 世界概况
  • 北美洲
    • 美国
    • 加拿大
    • 墨西哥
  • 南美洲
    • 巴西
    • 阿根廷
    • 南美洲其他地区
  • 欧洲
    • 英国
    • 德国
    • 法国
    • 义大利
    • 西班牙
    • 其他欧洲国家地区
  • 中东/非洲
    • 沙乌地阿拉伯
    • 阿拉伯聯合大公国
    • 中东/非洲其他地区
  • 亚太地区
    • 中国
    • 印度
    • 日本
    • 韩国
    • 台湾
    • 泰国
    • 印尼
    • 其他亚太地区

第九章竞争环境及分析

  • 主要企业及策略分析
  • 市场占有率分析
  • 合併、收购、协议和合作
  • 竞争对手仪表板

第十章 公司简介

  • Abtech, Inc.
  • Algeco Scotsman
  • Astron Buildings
  • Butler Manufacturing
  • Kirby Building Systems
  • Lindal Cedar Homes, Inc.
  • Modular Engineering
  • Niko Prefab Building Systems Private Limited
  • Par-Kut International
  • RED SEA INTERNATIONAL
  • Schulte Building Systems, Inc.
  • Skyline Champion Corporation
  • United Partition Systems, Inc.
  • EPACK Prefab
  • Consolis
简介目录
Product Code: KSI061617046

The prefabricated building systems market is expected to grow at a compound annual growth rate (CAGR) of 8.58% during the forecast period.

The prefabricated building systems market is anticipated to grow due to its advantages, such as speedy construction work, decreased labor cost, minimized work, and offsite manufacturing. Offsite manufactured prefabricated building systems have three main types of construction-

  • Modular (volumetric) construction is manufactured for the self-contained units and will be transported to the site for assembly.
  • Panelized construction is manufactured as flat panel units in an offsite facility to be transported to the site.
  • Hybrid prefab construction (semi-volumetric) are compact modular units (pods) that are used for areas such as kitchens and bathrooms.

The factor advantages associated with adjustable modular houses are as follows:

  • It can be expanded to create more space when needed.
  • The malleability of the houses makes it easier for the reassembly to create different rooms.
  • Houses constructed are movable and can be disassembled and transported to a new location

The main factors driving the prefabricated building systems market are the increasing demand from the residential construction industry, demand from commercial spaces, rising interest in green buildings, and new 3D construction technology.

  • The gross value added to the construction sector in the European Union was 5.5% in 2022. Among the members, the highest proportion were Austria (7.3%), Finland, and Romania (both 7.0%). The investment in housing was 5.9% of GDP in 2022. The highest among investments comprises 8.6% in Cyprus, 7.3% in Germany, 7.2% in Finland, and 7.1% in France.
  • The number of dwellings approved for construction increased in 23 Member States of the European Union between 2010 and 2022. It almost quadrupled in Bulgaria, followed by Estonia and Malta. With an increase of 277% in Bulgaria, Estonia by 162%, and Malta by 118%.
  • According to the U.S. Census Bureau, the annual rate for housing units authorized in permit-issuing places for new residential construction was 20,182 in 2022 and 18,217 in 2023.

PREFABRICATED BUILDING SYSTEMS MARKET DRIVERS:

  • Increase in the residential buildings sector

Globally, the demand for residential buildings is growing significantly with factors such as the growing economies of the Asia Pacific, the demand for affordable housing for the poor due to the homeless problem in Western countries, and rising prices of houses in urbanized settings. The number of free housing in Spain significantly jumped from 96,996 in 2022 to 98,040 in 2023. This increase in the free housing construction in Spain is due to the rising housing prices in many parts of the country especially in the places of high tourist visits.

This upsurge in residential housing demand would lead to an increased demand for modular construction, which is quick and easy to construct. Modular buildings are cheaper and produce less waste than traditional buildings.

  • Growing awareness about green buildings

Prefabricated building systems are a good solution for the environmental issues related to the construction industry. Construction generates waste and is also responsible for global energy consumption, waste generation, and CO2 emissions. Most of the waste ends up in landfills, contributing to further environmental harm. On the other hand, prefabricated construction requires less energy to build than traditional construction, as manufacturing methods use energy-saving technology and equipment. Its manufacturing process takes place in a controlled environment, leading to optimized materials and minimizing waste.

Prefabricated buildings are assembled more quickly and require less energy to transport materials to the construction site. Their construction is often designed to be energy-efficient, with features like high-performance insulation and HVAC systems requiring less energy for heating and cooling.

  • Demand for non-residential buildings application

The demand for prefabricated building systems for commercial buildings has been rising due to innovation, as Purcell Construction manufactures panel systems with exterior surfaces installed at the factory. These completed exterior panels allow the building to become weather-tight. This allows protection from the weather damage to the building. This also reduces scaffolding costs and decreases the time to MEP rough-in schedule. Other advantages included safety and quality control.

BOXX Modular's commercial buildings offer solutions for mobile Offices, office complexes, and custom offices. Several end-user industries use them, such as emergency & disaster response, chemical, biotech, and pharmaceutical, transportation, mining, concrete, & quarries, construction, manufacturing, and waste management.

  • Growing demand for 3D house construction

3D house construction will grow in the coming years due to the growing urbanization worldwide. Most of this demand would come from the developing countries. To address the challenges of affordable houses in cities of developing countries that are vulnerable to climate risks, Modular 3D printing construction is necessary. It can create adjustable, affordable, and climate-resilient housing for low-income citizens.

Prefabricated 3D printing modular housing offers construction of the components printed in a controlled environment and then assembled on-site. Different types of 3D-printed residential modular kits are manufactured, attracting investment and research to develop the technology. According to research by Wageningen University, the 3D technique could decrease 35% in total construction costs through increased building efficiency. Labor costs decreased due to the few people necessary for the construction, and training and development of skills required fewer costs. Further material usage could be decreased by 40% compared to conventional construction methods.

PREFABRICATED BUILDING SYSTEMS MARKET GEOGRAPHICAL OUTLOOK

  • The Asia Pacific region will dominate the prefabricated building systems market during the forecast period.

The major economies, such as China, Japan, India, and South Korea, dominate the Asia-Pacific region. Some of the fastest-growing emerging economies, such as ASEAN countries, are from this region. India and China are significant players in the region.

India plans to spend US$1.723 trillion on infrastructure between FY24 and FY30. This focuses on power, roads, and developing industries like renewable energy and electric vehicles. In the aviation sector, the number of airports has reached 149, and Indian airlines have ordered more than a thousand new aircraft. FDI in construction development reached US$33.91 billion in March 2024.

After the real estate turmoil of 2021, China remains the largest market for real estate growth and development. The new opportunity lies in policy decisions such as new urban buildings being certified green buildings by 2022. This includes public facilities such as schools, hospitals, museums, stadiums, affordable housing, and any single building over 20,000 square meters area. Applying prefabricated building systems in the construction and building industry would increase in the region for robust growth.

Prefabricated building systems market restraints:

  • It has technical issues associated with prefabrication, such as weak joints and poor thermal insulation performance, that need more innovation and development. It is expected to hinder the market growth.

Prefabricated building systems market key developments:

  • In January 2024, Consolis will build a new factory in the Netherlands. The production capacity of the facility is 2 million square meters of hollow core slabs per year. Automation and other high-tech industrialized processes would help to maintain quality and sustainability. Consolis VBI already has seven production sites in the Netherlands and is now expanding its production capacity in Koudekerk aan den Rijn's new production site. It is a leading player in the prefabricated hollow core slab. Koudekerk aan den Rijn region is expected to have many houses and apartments in the upcoming years, and it is located to the west of the Netherlands.
  • In September 2023, Mighty Buildings, a startup building tech for prefabricated environment-friendly homes, announced that it raised $52 million in a funding round co-led by Waed Ventures and Bold Capital with participation by Khosla Ventures. Mighty Buildings has proprietary printed material. This is made of 60% recycled glass, is five times the strength of concrete, 70% the weight, and produces fewer carbon emissions.
  • In October 2022, CyBe announced the building of the first-ever four-story building in Eindhoven with 3D technology. CyBe collaborated with Lab040 in Eindhoven to create the first-ever, 3D-printed, four-story apartment using proprietary hardware, software, and printing materials. It is a prominent player in 3D concrete printing.
  • In July 2022, Champion Retail Housing, a subsidiary of Skyline Champion Corporation, announced the acquisition of Alta Cima Corporation. It would acquire the assets and assume operations of the Factory Expo Home Centers located at 12 Skyline Champion manufacturing facilities across the United States. The company has the leading portfolio of manufactured and modular homes, ADUs, park models, and modular buildings for the single-family, multi-family, and hospitality sectors.

The prefabricated building systems market is segmented and analyzed as follows:

By Dimensions

  • Skeleton System
  • Panel System
  • Cellular System
  • Combined System

By Component

  • Metal
  • Non-Metal
  • Others

By End-user Industry

  • Residential
  • Commercial
  • Infrastructural
  • Others

By Geography

  • North America
  • USA
  • Canada
  • Mexico
  • South America
  • Brazil
  • Argentina
  • Rest of South America
  • Europe
  • United Kingdom
  • Germany
  • France
  • Italy
  • Spain
  • Rest of Europe
  • Middle East and Africa
  • Saudi Arabia
  • UAE
  • Rest of the Middle East and Africa
  • Asia Pacific
  • China
  • India
  • Japan
  • South Korea
  • Taiwan
  • Thailand
  • Indonesia
  • Rest of Asia-Pacific

TABLE OF CONTENTS

1. INTRODUCTION

  • 1.1. Market Overview
  • 1.2. Market Definition
  • 1.3. Scope of the Study
  • 1.4. Market Segmentation
  • 1.5. Currency
  • 1.6. Assumptions
  • 1.7. Base and Forecast Years Timeline
  • 1.8. Key benefits for the stakeholders

2. RESEARCH METHODOLOGY

  • 2.1. Research Design
  • 2.2. Research Process

3. EXECUTIVE SUMMARY

  • 3.1. Key Findings
  • 3.2. Analyst View

4. MARKET DYNAMICS

  • 4.1. Market Drivers
    • 4.1.1. Increase in the residential buildings sector
    • 4.1.2. Growing awareness about green buildings
    • 4.1.3. Demand for non-residential buildings application
    • 4.1.4. Growing demand for 3D house construction
  • 4.2. Market Restraints
    • 4.2.1. Technical issues thus needed more innovation and development
  • 4.3. Porter's Five Forces Analysis
    • 4.3.1. Bargaining Power of Suppliers
    • 4.3.2. Bargaining Power of Buyers
    • 4.3.3. The Threat of New Entrants
    • 4.3.4. Threat of Substitutes
    • 4.3.5. Competitive Rivalry in the Industry
  • 4.4. Industry Value Chain Analysis

5. PREFABRICATED BUILDING SYSTEMS MARKET BY DIMENSIONS

  • 5.1. Introduction
  • 5.2. Skeleton System
  • 5.3. Panel System
  • 5.4. Cellular System
  • 5.5. Combined System

6. PREFABRICATED BUILDING SYSTEMS MARKET BY COMPONENT

  • 6.1. Introduction
  • 6.2. Metal
  • 6.3. Non-Metal
  • 6.4. Others

7. PREFABRICATED BUILDING SYSTEMS MARKET BY END-USER INDUSTRY

  • 7.1. Introduction
  • 7.2. Residential
  • 7.3. Commercial
  • 7.4. Infrastructural
  • 7.5. Others

8. PREFABRICATED BUILDING SYSTEMS MARKET BY GEOGRAPHY

  • 8.1. Global Overview
  • 8.2. North America
    • 8.2.1. United States
    • 8.2.2. Canada
    • 8.2.3. Mexico
  • 8.3. South America
    • 8.3.1. Brazil
    • 8.3.2. Argentina
    • 8.3.3. Rest of South America
  • 8.4. Europe
    • 8.4.1. United Kingdom
    • 8.4.2. Germany
    • 8.4.3. France
    • 8.4.4. Italy
    • 8.4.5. Spain
    • 8.4.6. Rest of Europe
  • 8.5. Middle East and Africa
    • 8.5.1. Saudi Arabia
    • 8.5.2. United Arab Emirates
    • 8.5.3. Rest of the Middle East and Africa
  • 8.6. Asia-Pacific
    • 8.6.1. China
    • 8.6.2. India
    • 8.6.3. Japan
    • 8.6.4. South Korea
    • 8.6.5. Taiwan
    • 8.6.6. Thailand
    • 8.6.7. Indonesia
    • 8.6.8. Rest of Asia-Pacific

9. COMPETITIVE ENVIRONMENT AND ANALYSIS

  • 9.1. Major Players and Strategy Analysis
  • 9.2. Market Share Analysis
  • 9.3. Mergers, Acquisitions, Agreements, and Collaborations
  • 9.4. Competitive Dashboard

10. COMPANY PROFILES

  • 10.1. Abtech, Inc.
  • 10.2. Algeco Scotsman
  • 10.3. Astron Buildings
  • 10.4. Butler Manufacturing
  • 10.5. Kirby Building Systems
  • 10.6. Lindal Cedar Homes, Inc.
  • 10.7. Modular Engineering
  • 10.8. Niko Prefab Building Systems Private Limited
  • 10.9. Par-Kut International
  • 10.10. RED SEA INTERNATIONAL
  • 10.11. Schulte Building Systems, Inc.
  • 10.12. Skyline Champion Corporation
  • 10.13. United Partition Systems, Inc.
  • 10.14. EPACK Prefab
  • 10.15. Consolis