查看购物车
  • Traditional Chinese
  • English
  • Japanese
  • Korean
封面
市场调查报告书
商品编码
1137844

塑料涂料市场 - 增长、趋势、COVID-19 影响和预测（2022-2027 年）

Plastic Coatings Market - Growth, Trends, and Forecast (2022 - 2027)
出版日期: | 出版商: Mordor Intelligence | 英文 120 Pages | 商品交期: 2-3个工作天内

价格

※ 本网页内容可能与最新版本有所差异。详细情况请与我们联繫。

简介目录

预计在预测期间（2022-2027 年），全球塑料涂料市场将以 5.2% 左右的复合年增长率增长。

市场在 2020 年受到 COVID-19 的负面影响。受疫情影响，世界各地的各种建筑施工活动以及汽车、电子和消费电子等其他终端用户行业都暂时停止。大流行已经扰乱了全球供应链。随着关键製造设备和工厂的关闭，各国的封锁影响了生产。然而，该行业已经復苏。

主要亮点

  • 短期内，各终端用户行业对高性能涂料的消费量增加是市场的主要驱动力。
  • 另一方面，各国对塑料和塑料相关产品的监管可能会阻碍市场。
  • 在预测期内，从生产过程中产生的废物中回收塑料和树脂可能是市场的机会。
  • 亚太地区在全球市场上占主导地位，印度和中国等国家的消费量最高。

主要市场趋势

建筑业主导市场

  • 塑料涂料主要应用于建筑行业。例如，由氯乙烯□□ (PVC) 製成的增塑溶胶用作屋顶涂料。
  • 预计未来几年全球建筑业将显着增长，这将推动对塑料涂料的需求。
  • 根据土木工程师学会 (ICE) 的一项研究，到 2030 年，全球建筑业的价值预计将达到 8 万亿美元，主要由中国、印度和美国地区推动。
  • 根据联合国的数据，世界上大约 50% 的人口居住在城市地区，预计到 2030 年将达到 60%。经济增长和人口增长的步伐必须与住房需求保持同步。到 2030 年，预计全球约 40% 的人口每天需要超过 96,150 个住房单元。
  • 在全球范围内，亚太地区是最大的建筑市场，其次是印度、中国和东南亚国家。在印度，政府已经启动了 100 个智能城市和“到 2022 年为所有人提供住房”等项目，预计这些项目将在预测期内显着推动印度住房建设市场。
  • 德国社会民主党政府一直关注该国的住房危机，并成立了一个新的部门来监督住房项目。 2021年11月，政府承诺从2022年起每年建造超过40万套新房，其中10万套将获得补贴。
  • 所有上述因素预计将在预测期内增加对塑料涂料的需求。

中国主导亚太地区

  • 中国是国内生产总值最大的经济体之一，也是世界上增长最快的经济体之一。中国也是世界上最大的汽车、电子产品和电动汽车製造商之一。
  • 该国对塑料涂料的大部分需求来自汽车和建筑行业。
  • 中国是全球最大的汽车市场之一，就年销量和产量而言，中国仍将是全球最大的汽车市场。到2025年，国内产量预计将达到3500万辆。
  • 中国是世界上最大的强国之一，其建筑业的增长速度几乎超过了其他所有行业。 2021年，我国建筑业企业实现营业额80138亿元，比上年增长2.1%。
  • 根据美国国际贸易署的数据，中国是全球最大的建筑市场，预计 2022 年至 2030 年的复合年增长率为 8.6%。
  • 因此，在预测期内，亚太地区对塑料涂料的需求预计将增长，尤其是在中国市场。

竞争格局

塑料涂料市场部分整合。主要公司包括宣伟公司、Akzo Nobel N.V.、3M、Axalta Coating Systems、PPG Industries, Inc.（排名不分先后）。

其他好处

  • Excel 格式的市场预测 (ME) 表
  • 三个月的分析师支持

内容

第1章介绍

  • 调查先决条件
  • 调查范围

第2章研究方法

第 3 章执行摘要

第 4 章市场动态

  • 驱动程序
    • 各种终端用户行业对高性能涂料的消费量不断扩大
    • 其他驱动程序
  • 限制因素
    • 各国对塑料和塑料相关产品的规定
    • 其他限制因素
  • 工业价值链分析
  • 波特五力分析
    • 供应商的议价能力
    • 消费者的议价能力
    • 新进入者的威胁
    • 替代品的威胁
    • 争用度

第 5 章市场细分

  • 塑料型
    • 聚氯乙烯
    • 聚氨酯
    • 涤纶
    • 氟树脂
    • 聚□胺
    • 聚乙烯
    • 其他塑料
  • 形状
    • 液体
    • 粉末
  • 最终用户行业
    • 汽车
    • 建筑/施工
    • 航空航天与国防
    • 电子产品
    • 家用电器
    • 其他最终用户行业
  • 按地区
    • 亚太地区
      • 中国
      • 印度
      • 日本
      • 韩国
      • 其他亚太地区
    • 北美
      • 美国
      • 加拿大
      • 墨西哥
    • 欧洲
      • 德国
      • 英国
      • 意大利
      • 法国
      • 其他欧洲
    • 南美洲
      • 巴西
      • 阿根廷
      • 其他南美洲
    • 中东和非洲
      • 沙特阿拉伯
      • 南非
      • 其他中东和非洲

第 6 章竞争格局

  • 併购、合资、联合研究、合同等
  • 市场份额 (%)**/排名分析
  • 领先公司采用的战略
  • 公司简介
    • 3M
    • Akzo Nobel N.V.
    • Axalta Coating Systems
    • BASF SE
    • Covestro AG
    • Diamond Vogel
    • KANSAI PAINT CO. LTD
    • NIPPON PAINT
    • Peerless Plastics & Coatings
    • PPG Industries Inc.
    • The Sherwin-Williams Company

第 7 章市场机会和未来趋势

  • 从生产过程中产生的废物中回收塑料/树脂
简介目录
Product Code: 62631

The Global Plastic Coatings Market is expected to grow at a CAGR of around 5.2% during the forecast period (2022-2027).

The market was negatively impacted by COVID-19 in 2020. Due to the pandemic situation, various building and construction activities across the globe were temporarily stopped, also other end-user industries such as automotive, electronics, and consumer appliances were also on temporary hold. The pandemic has led to disrupted supply chains globally. Lockdowns across different countries have affected production as key manufacturing units and factories were shut. However, the industry has started recovering since then.

Key Highlights

  • Over the short term, the major factor driving the market studied is the growing consumption of high-performance coatings in various end-user industries.
  • On the flip side, regulations on plastic and plastic-related products in various nations are likely to hinder the market.
  • Recycling of plastic/resins from waste in production processes is likely to act as an opportunity for the market in the forecast period.
  • Asia-Pacific dominated the market across the globe with the largest consumption in the country such as India, China, etc.

Key Market Trends

Building and Construction Segment to Dominate the Market

  • Plastic coatings find major applications in the construction industry. For example, plastisol, a coating made from Poly Vinyl Chloride (PVC) is used as a coating on roofs.
  • The global construction industry is projected to have significant growth in the coming years, which is likely to drive the demand for plastic coatings.
  • According to a study by the Institution of Civil Engineers (ICE), the global construction industry is expected to value USD 8 trillion by 2030, primarily driven by China, India, and the United States region.
  • According to the United Nations (UN), around 50% of the global population resides in urban cities, which is projected to touch 60%, by 2030. The pace of economic and demographic growth must be in harmony with the demand for residential activities. By 2030, around 40% of the global population is likely to need housing at the rate of over 96,150 houses per day.
  • Globally, Asia-Pacific has the largest construction market, followed by India, China, and various Southeast Asian countries. In India, the government has initiated projects, such as 100 smart cities and 'Housing for All by 2022', which are expected to immensely drive the residential construction market in India through the forecast period.
  • German Social Democrat government is focusing heavily on the housing crisis in the country and has created a new ministry to supervise its housing plans. In November 2021, the government pledged more than 400,000 new housing units every year from 2022, 100,000 of which will be publicly subsidized. ​
  • All the aforementioned factors are likely to increase the demand for plastic coatings over the forecast period.

China to Dominate the Asia-Pacific Region

  • China is one of the largest economies, in terms of GDP and is among the fastest emerging economies in the world. Moreover, China is among the top manufacturers of automobiles, electronic devices, and electric vehicles globally.
  • The majority of the demand for plastic coatings in the country comes from the automotive and construction industry.
  • China is one of the world's largest vehicle markets and will continue to be the world's largest vehicle market by both annual sales and manufacturing output, By 2025 domestic production is expected to reach 35 million vehicles.
  • China is one of the largest countries in the world, where the construction sector dominates almost all other sectors in growth. In 2021, the revenue of construction enterprises in China was CNY 8,013.8 billion, an increase of 2.1% over the previous year.
  • As per U.S. International Trade Administration, China is the world's largest construction market and is forecasted to grow at an annual average of 8.6% between 2022 and 2030.
  • Such factors are expected to increase the demand for plastic coatings in the Asia Pacific region, mainly in the Chinese market over the forecast period.

Competitive Landscape

The plastic coatings market is partially consolidated. Some of the major players include (not in any particular order) The Sherwin-Williams Company, Akzo Nobel N.V., 3M, Axalta Coating Systems, and PPG Industries, Inc. among others.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

  • 1.1 Study Assumptions
  • 1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET DYNAMICS

  • 4.1 Drivers
    • 4.1.1 Growing Consumption of High-Performance Coatings in various end-user industries
    • 4.1.2 Other Drivers
  • 4.2 Restraints
    • 4.2.1 Regulations on plastic and plastic-related products in various nations
    • 4.2.2 Other Restraints
  • 4.3 Industry Value-Chain Analysis
  • 4.4 Porter's Five Forces Analysis
    • 4.4.1 Bargaining Power of Suppliers
    • 4.4.2 Bargaining Power of Consumers
    • 4.4.3 Threat of New Entrants
    • 4.4.4 Threat of Substitute Products and Services
    • 4.4.5 Degree of Competition

5 MARKET SEGMENTATION

  • 5.1 Plastic Type
    • 5.1.1 PVC
    • 5.1.2 Polyurethane
    • 5.1.3 Polyester
    • 5.1.4 Fluoropolymer
    • 5.1.5 Polyamide
    • 5.1.6 Polyethylene
    • 5.1.7 Other Plastic Types
  • 5.2 Form
    • 5.2.1 Liquid
    • 5.2.2 Powder
  • 5.3 End-user Industry
    • 5.3.1 Automotive
    • 5.3.2 Building and Construction
    • 5.3.3 Aerospace and Defense
    • 5.3.4 Electronics
    • 5.3.5 Consumer Appliances
    • 5.3.6 Other End-user Industries
  • 5.4 Geography
    • 5.4.1 Asia-Pacific
      • 5.4.1.1 China
      • 5.4.1.2 India
      • 5.4.1.3 Japan
      • 5.4.1.4 South Korea
      • 5.4.1.5 Rest of Asia-Pacific
    • 5.4.2 North America
      • 5.4.2.1 United States
      • 5.4.2.2 Canada
      • 5.4.2.3 Mexico
    • 5.4.3 Europe
      • 5.4.3.1 Germany
      • 5.4.3.2 United Kingdom
      • 5.4.3.3 Italy
      • 5.4.3.4 France
      • 5.4.3.5 Rest of Europe
    • 5.4.4 South America
      • 5.4.4.1 Brazil
      • 5.4.4.2 Argentina
      • 5.4.4.3 Rest of South America
    • 5.4.5 Middle-East and Africa
      • 5.4.5.1 Saudi Arabia
      • 5.4.5.2 South Africa
      • 5.4.5.3 Rest of Middle-East and Africa

6 COMPETITIVE LANDSCAPE

  • 6.1 Mergers, Acquisitions, Joint Ventures, Collaborations, and Agreements
  • 6.2 Market Share (%)**/Ranking Analysis
  • 6.3 Strategies Adopted by Leading Players
  • 6.4 Company Profiles
    • 6.4.1 3M
    • 6.4.2 Akzo Nobel N.V.
    • 6.4.3 Axalta Coating Systems
    • 6.4.4 BASF SE
    • 6.4.5 Covestro AG
    • 6.4.6 Diamond Vogel
    • 6.4.7 KANSAI PAINT CO. LTD
    • 6.4.8 NIPPON PAINT
    • 6.4.9 Peerless Plastics & Coatings
    • 6.4.10 PPG Industries Inc.
    • 6.4.11 The Sherwin-Williams Company

7 MARKET OPPORTUNITIES AND FUTURE TRENDS

  • 7.1 Recycling of plastic / resins from waste in production processes