气溶胶阀市场 - COVID-19 的增长、趋势、影响和预测（2022-2027 年）

在预测期间（2022-2027 年），气溶胶阀市场预计将以 4.13% 的复合年增长率增长。

推动所研究市场增长的主要因素是油漆和涂料和汽车行业对气溶胶阀的需求不断增长，以及与卫生和个人护理相关的意识不断提高。

主要亮点

• 哮喘吸入器和其他喷雾剂等产品在医疗保健行业的渗透率不断提高，消费者生活方式不断改善，个人护理和化妆品行业对气溶胶阀的需求不断增加，360 A 相对区域覆盖的材料消耗减少 25% ，这允许更高程度的应用，预计也将在预测期内增加对气溶胶阀的需求。
• 气雾剂阀中使用的垫片、密封件、弹簧和汲取管等零件来自许多製造商，因此我们的产品种类繁多。此外，由于产品差异化，可以轻鬆且低成本地改变供应源。因此，供应商的议价能力较低，这会影响整体阀门定价。
• 由于不断增长的城市人口带来的收入增加，新兴国家的汽车製造业正经历着惊人的增长。在发达经济体，柴油/汽油汽车对电动和混合动力汽车的高替代率正在推动对气溶胶阀的需求。然而，预计气溶胶阀市场的增长将受到对气溶胶製造和与容器中内容物成分相关的产品安全的规定的阻碍。
• 供应商依靠合作伙伴关係和产品创新来维持其市场占有率。 Kostar 集团是第一家符合化妆品 GMP 的气雾剂阀门和执行器製造商，符合最高的行业製造和服务标准。意大利3家工厂获得UNI EN ISO 22716:2008化妆品GMP认证。
• COVID-19 疫情对气雾剂阀门行业产生了积极影响，医疗保健行业的需求激增，世界各地的监管机构都支持维持稳定的供应。然而，在汽车等其他行业，由于生产活动完全停止，需求下降。

主要市场趋势

个人护理领域有望占据较大的市场份额

• 新兴市场人口可支配收入的增加以及製造商对方便包装的偏好不断变化是推动气雾剂阀市场的因素之一。气溶胶阀作为气溶胶罐广泛用于个人护理行业，用于包装各种产品，例如除臭剂、面霜和身体乳霜、剃须泡沫和香水。
• 根据 AEROBAL 的数据，化妆品行业仍然是铝气雾罐最重要的市场，占全球总产量的近 85%。除臭剂和香水是主要产品，生产了二分之一的罐头，市场占有率达60%，其次是髮胶、摩丝等化妆品。铝气雾罐的普及将导致行业对气雾阀的需求增加。
• 美国对个人护理产品的需求及其对全球数量的贡献显着增加。仅次于欧洲国家，美国是化妆品和个人护理产品消费量最高的国家，FDA 对进口进行监管和检查。儘管对除臭剂、髮胶等的需求波动，这些因素仍将推动市场增长。
• 此外，参与者正在投资阀门技术以实现可持续发展，以跟上市场增长的步伐。 2021 年 7 月，Williams Advanced Engineering 与 Salford Valve Company Ltd (Salvalco) 合作，支持和开发颠覆性气溶胶阀技术。 Salbarco 近年来受益于由 Foresight Group LLP 与 Williams Advanced Engineering (WAE) 合作管理的超过 300 万欧元的投资基金。

预计欧洲将占据最大的市场份额

• 在欧洲，医疗保健、个人护理和汽车等各个领域对气雾剂阀门的需求很大。根据全球网络指数对 2,300 多名定期购买天然化妆品和个人护理产品的英国网络用户的调查，近 80% 的人考虑环境和健康。
• 根据欧洲气雾剂联合会 (FEA) 的数据，英国、德国和法国的气雾剂市场份额占欧洲所有细分市场年气雾剂产量的 60% 以上，该地区气雾剂阀门的增长机会正在支撑
• 在气雾剂生产方面，个人护理领域的市场份额最大，为 57%，其次是油漆、清漆、食品、药品和化学品。气雾阀在这些罐头中的广泛应用导致该地区气雾阀的同步增长。
• 政府对废旧易拉罐的收集和回收制定了严格的规定，这促使该行业优化监管链以符合规定。例如，欧洲成员国可以开髮用于回收和回收废旧包装的系统，并实现包装废物中 80% 铁和 60% 铝的最低迴收目标。这将促进气溶胶阀门的回收利用，通过抵消上述市场製约因素，可望实现可持续的市场增长。

竞争格局

气溶胶阀市场因供应商众多而分散。主要参与者包括 Aptar Group、Precision Valve Corporation 和 Coster Tecnologie Speciali。市场上也有一些产品发布、联盟和合作伙伴关係。

• 2021 年 12 月 - 作为可持续发展计划的一部分，Beiersdorf 在其 Nivea Ecodeo 产品线中引入了气候友好型气溶胶阀系统，同时在其 Nivea Men 产品线中引入了 100% 再生铝罐。此外，它还宣布将为欧洲市场提供采用环保和可持续包装的一系列除臭剂和剃须凝胶。

其他好处

• Excel 格式的市场预测 (ME) 表
• 三个月的分析师支持

内容

第1章介绍

• 研究假设和市场定义
• 调查范围

第2章研究方法

第 3 章执行摘要

第 4 章市场洞察

• 市场概览
• 工业价值链分析
• 工业吸引力 - 波特五力分析
  • 供应商的议价能力
  • 买家的议价能力
  • 新进入者的威胁
  • 替代品的威胁
  • 竞争公司之间的敌对关係
• 评估 COVID-19 对行业的影响

第5章市场动态

• 市场驱动力
  • 化妆品和个人护理行业的强劲需求
  • 迁移到易于携带和方便的软件包
• 市场製约因素
  • 严格的政府法规

第 6 章市场细分

• 类型
  • 连续公式
  • 仪表类型
• 最终用户行业
  • 个人护理
  • 家庭护理
  • 医疗保健
  • 汽车行业
  • 其他最终用户行业
• 按地区
  • 北美
  • 欧洲
  • 亚太地区
  • 拉丁美洲
  • 中东和非洲

第 7 章竞争格局

• 公司简介
  • Aptargroup
  • The Precision Valve Corporation
  • Coster Tecnologie Speciali
  • Lindal Group Holding GmbH
  • Mitani Valve
  • Summit Packaging Systems
  • Clayton Corp.
  • Newman Green
  • Koh-I-Noor Mlada Vozice A.S.
  • Salvalco
  • Majesty Packaging Systems Limited
  • Shanghai Sunhome Industrial Company
  • EC Pack Industrial Limited
  • C. Ehrensperger Ag.
  • Aroma Industries
  • Seugn Il Corporation
  • Yingbo Aerosol Valve（Zhongshan）Co., Ltd.
  • Guangzhou Zhongpin Aerosol Valves Co., Ltd
  • Maruichi Co. Ltd

第8章 投资分析

第9章 市场的将来性

The aerosol valve market is expected to grow with a CAGR of 4.13% during the forecast period (2022 - 2027). The major factors driving the growth of the market studied are increasing demand for aerosol valves from the paints & coatings and automotive industry as well as increasing awareness related to hygiene & personal care.

Key Highlights

• Increasing product penetration in the healthcare industry for products, such as asthma inhalers and other types of sprays, continuously improving consumer lifestyle backing the demand from the personal care and cosmetic industry for aerosol valves, which enable the application in 360 degrees and consume 25% less substance for the relative area coverage is also expected to boost the demand for aerosol valves over the forecast period.
• The components used for manufacturing aerosol valves, such as gaskets, seals, springs, and dip tubes, are available in abundance owing to the presence of many manufacturers. In addition, low product differentiation enables easy supplier switching at a low cost. The combined effect of this has resulted in the low bargaining power of suppliers and thus has an impact on the overall pricing of valves.
• Due to the rise in urban population, which is increasing income, the automotive manufacturing is witnessing tremendous growth in emerging economies. In developed economies, there is a high replacement rate of diesel/petrol cars with electric or hybrid cars, propelling the demand for aerosol valves. However, aerosol valve market growth is expected to be hampered by regulations imposed on aerosol manufacturing and product safety related to the composition of the contents inside the containers.
• Vendors rely on partnerships and product innovations to remain relevant in the market. Coster Group was the first aerosol valve and actuator manufacturer to comply with cosmetic GMPs, meeting the industry's highest manufacturing and service standards. It obtained the UNI EN ISO 22716:2008 certification on cosmetic Good Manufacturing Practices (GMPs) for three Italian plants.
• The outbreak of COVID -19 has had a positive impact on the aerosol valve industry due to a sudden increase in the demand from the healthcare sector and support from regulatory bodies across the globe to maintain a steady supply. Though the demand from other sectors, such as automotive, has lowered due to a complete halt in production activities.

Key Market Trends

Personal Care Segment is Expected to Hold a Significant Market Share

• An increase in disposable income of the population in developing countries and changes in preferences of manufacturers for convenient packaging are some of the factors driving the aerosol valve market. Aerosol valves are widely used in the personal care industry in aerosol cans for packaging different products such as deodorants, face & body creams, shaving foams, and perfumes.
• According to AEROBAL, the cosmetics sector remains the most important market for aluminum aerosol cans by far, accounting for nearly 85% of total production worldwide. Deodorants and perfumes are the major products accounting for every second can produced and have a 60% market share, followed by hair sprays, hair mousses, and other cosmetic products. The surge in aluminum aerosol cans will lead to increased demand for aerosol valves in the industry.
• The demand for personal care products in the United States and its contribution to the global number is significantly high. After European countries, the United States marks a higher consumption of cosmetic and personal care products, with FDA regulating and inspecting imports. Owing to these factors, the country will drive the market growth despite fluctuating demand for deodorants, hair sprays, etc.
• Moreover, players are investing in valve technology for sustainability, catering to market growth. In July 2021, Williams Advanced Engineering collaborated with Salford Valve Company Ltd (Salvalco) to support and develop disruptive aerosol valve technology. Salvalco has benefitted from over Euro 3 million of funding, over recent years, from an investment fund managed by Foresight Group LLP in collaboration with Williams Advanced Engineering (WAE).

Europe is Expected to Hold the Largest Market Share

• Europe has significant demand for aerosol valves for various sectors, including healthcare, personal care, automotive, etc. A survey conducted by Global Web Index on over 2,300 web users from the United Kingdom who buy natural cosmetic and personal care products regularly indicated that about 80% did so because they care about the environment and their health.
• According to the European Aerosol Federation (FEA), the aerosol market shares of the United Kingdom, Germany, and France provide more than 60% of the annual aerosol production in Europe in all segments, boosting the growth opportunities for aerosol valves in the region.
• The personal care segment has the largest market share of 57% in terms of aerosol production, followed by paints, varnishes, food, pharmaceuticals, and chemicals. The wide application of aerosol valves in these cans results in a simultaneous growth of aerosol valves in the region.
• Stringent government regulations surrounding the collection and recycling of used cans have made the industry follow an optimum chain of operations to comply with the regulations. For instance, It is mandatory for the Member States of Europe to develop systems for the return and collection of used packaging to attain, amongst other aspects, the following minimum targets for recycling: 80% of ferrous metals and 60% of aluminum contained in packaging waste. This boosts the recycling of aerosol valves and thus provides sustainable market growth by combatting restraints such as the above.

Competitive Landscape

The aerosol valve market is fragmented owing to the presence of multiple vendors in the market. Some of the major players in the market are Aptar Group, Precision Valve Corporation, Coster Tecnologie Speciali, among others. The market is also witnessing multiple product launches, collaborations, and partnerships.

• December 2021 - As a part of the sustainability program, Beiersdorf introduced a more climate-friendly aerosol valve system for the Nivea Ecodeo product line while introducing 100% recycled aluminum cans across its Nivea Men line. Further, the company stated that this range of deodorants and shaving gels would be made available in environmentally sustainable packaging for the European market.

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

• 1.1 Study Assumptions and Market Definition
• 1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET INSIGHTS

• 4.1 Market Overview
• 4.2 Industry Value Chain Analysis
• 4.3 Industry Attractiveness - Porter's Five Forces Analysis
  • 4.3.1 Bargaining Power of Suppliers
  • 4.3.2 Bargaining Power of Buyers
  • 4.3.3 Threat of New Entrants
  • 4.3.4 Threat of Substitutes
  • 4.3.5 Intensity of Competitive Rivalry
• 4.4 Assessment of Impact of Covid-19 on the Industry

5 MARKET DYNAMICS

• 5.1 Market Drivers
  • 5.1.1 Strong Demand From the Cosmetic & Personal Care Industry
  • 5.1.2 Shift Towards Easy-To-Handle and Convenient Packaging
• 5.2 Market Restraints
  • 5.2.1 Stringent Government Regulations

6 MARKET SEGMENTATION

• 6.1 Type
  • 6.1.1 Continuous
  • 6.1.2 Metered
• 6.2 End-user Industry
  • 6.2.1 Personal Care
  • 6.2.2 Home Care
  • 6.2.3 Healthcare
  • 6.2.4 Automotive
  • 6.2.5 Other End-user Industries
• 6.3 Geography
  • 6.3.1 North America
  • 6.3.2 Europe
  • 6.3.3 Asia-Pacific
  • 6.3.4 Latin America
  • 6.3.5 Middle-East and Africa

7 COMPETITIVE LANDSCAPE

• 7.1 Company Profiles
  • 7.1.1 Aptargroup
  • 7.1.2 The Precision Valve Corporation
  • 7.1.3 Coster Tecnologie Speciali
  • 7.1.4 Lindal Group Holding GmbH
  • 7.1.5 Mitani Valve
  • 7.1.6 Summit Packaging Systems
  • 7.1.7 Clayton Corp.
  • 7.1.8 Newman Green
  • 7.1.9 Koh-I-Noor Mlada Vozice A.S.
  • 7.1.10 Salvalco
  • 7.1.11 Majesty Packaging Systems Limited
  • 7.1.12 Shanghai Sunhome Industrial Company
  • 7.1.13 EC Pack Industrial Limited
  • 7.1.14 C. Ehrensperger Ag.
  • 7.1.15 Aroma Industries
  • 7.1.16 Seugn Il Corporation
  • 7.1.17 Yingbo Aerosol Valve (Zhongshan) Co., Ltd.
  • 7.1.18 Guangzhou Zhongpin Aerosol Valves Co., Ltd
  • 7.1.19 Maruichi Co. Ltd

8 INVESTMENT ANALYSIS

9 FUTURE OF THE MARKET