离心泵市场增长、趋势、COVID-19 的影响和预测2023-2028

在 2022 年至 2027 年的预测期内，全球离心泵市场预计将以超过 5.4% 的复合年增长率增长。

COVID-19 大流行对世界各地的石油和天然气活动产生了负面影响。 下降的主要原因是项目建设活动的延误和供应链中断，从而减少了全球对离心泵的需求。 在北美和非洲等地区，深海油气田的勘探和生产活动正在加强，这有望提振离心泵市场的需求。 然而，由于 E&P 公司削减成本和项目延误，石油和天然气价格的波动可能会影响离心泵市场。

由于泵在上游、中游和下游行业的广泛应用，石油和天然气终端用户行业可能会主导离心泵市场。

此外，使深海和超深水勘探成为可能的技术发展预计将促进石油产量，为预测期内的市场增长提供机会。

由于工业基础设施的发展带来的强劲经济增长，预计亚太地区将成为预测期内规模最大、增长最快的地区。

主要市场趋势

石油和天然气板块主导市场

离心泵在石油和天然气工业中用于输送石油、石油产品、液化气体和其他流体。 预计在预测期内，石油和天然气基础设施发展的激增将为离心泵市场提供重大推动力。

截至 2020 年，全球原油消耗量已达到每天 9129.7 万桶。 原油需求的增加预计将推动全球对离心泵的需求。

2020 年 4 月，阿特拉斯科普柯推出了 WEDA S50，这是 WEDA 潜水离心泵系列的新成员。 WEDA S 系列专为粘稠、柔软的湿泥浆和其他类似混合物而设计。 这些离心泵是建筑排水、工业或精炼应用的理想选择。

2020 年 8 月，Weir Oil & Gas Dubai 从阿联酋国家石油公司获得一份为期三年的离心泵维护和维修合同。 该合同确保提供石油和天然气旋转设备服务、机械车间服务、应急製造、现场工作等。

将于2020年1月生效的IMO2020（国际海事组织）法规将增加对低硫燃料的需求，大型炼油厂可能被迫升级现有基础设施以生产低硫燃料。有一种性质。 随着炼油厂预计将进行改造，预计未来几年对离心泵的需求将会增加。

由于上述原因，石油和天然气领域预计将在预测期内主导离心泵市场。

亚太地区主导市场

由于有利于商业的政策，亚太地区的工业基础设施正在发展。 亚太地区的大多数国家都处于增长阶段，高人口增长率正在增加对水供应的需求。

从 2020 年到 2025 年，预计中国将成为亚太地区原油精炼增长最快的国家。 截至2020年，中国炼油能力已达到1670万桶/日。

过去三年，亚太地区的原油消费量以 3-4% 的速度增长，约占全球消费量的 35.2%。 人口增长和工业化正在支持消费增长。 在过去几年中，对用于运输原油的离心泵的需求显着增长。

2022 年 1 月，喀拉拉邦水务局开始在 Aluva 建设一座日处理能力为 1.42 亿升 (MLD) 的水处理厂。 该工厂将耗资 180 卢比，预计将于 2024 年完工。 随着这些即将到来的水处理项目，在预测期内对离心泵的需求可能会增加。

此外，根据联合国大学水、环境与健康研究所的数据，到 2020 年，新加坡、阿联酋、卡塔尔和中国等高收入国家将处理其产生的约 74% 的工业废水和市政用水. 在中高收入国家下降到 43%，在中低收入国家下降到 26% 左右。 随着环保意识的提高和水资源短缺的日益严重，预计亚太地区新兴国家对水处理厂和水处理厂用离心泵的需求将增加。

因此，随着人口增长和城市化进程加快，对汽油、取暖油、液化石油气等石油产品的需求日益增加。 因此，正在建立新的炼油厂以满足现有需求，这有望在预测期内推动亚太离心泵市场。

竞争格局

离心泵市场是分散的。 该市场的主要参与者包括 Flowserve Corporation、Schlumberger Ltd、Baker Hughes Company、KSB SE &Co.KGaA 和 Weir Group PLC。

其他好处

• Excel 格式的市场预测 (ME) 表
• 三个月的分析师支持

内容

第一章介绍

• 调查范围
• 市场定义
• 调查假设

第二章研究方法论

第 3 章执行摘要

第 4 章市场概述

• 简介
• 到 2027 年的市场规模和需求预测（单位:十亿美元）
• 近期趋势和发展
• 政府法规和政策
• 市场动态
  • 司机
  • 约束因素
• 供应链分析
• 波特的五力分析
  • 供应商的议价能力
  • 消费者的议价能力
  • 新进入者的威胁
  • 替代品的威胁
  • 竞争公司之间的敌对关係

第 5 章市场细分

• 阶段
  • 单级泵
  • 多级泵
• 最终用户
  • 石油和天然气
  • 发电厂
  • 其他最终用户
• 叶轮类型
  • 打开
  • 部分开放式
  • 封闭型
• 地区
  • 北美
  • 欧洲
  • 亚太地区
  • 南美洲
  • 中东和非洲

第六章竞争格局

• 併购、合资、合作、协议
• 主要参与者采用的策略
• 公司简介
  • Baker Hughes Company
  • Dover Corporation
  • Ebara Corporation
  • Flowserve Corporation
  • ITT Inc.
  • KSB SE & Co. KGaA
  • Ruhrpumpen Group
  • Schlumberger Ltd
  • Sulzer Ltd
  • Weir Group PLC

第7章 市场机会未来动向

The global centrifugal pumps market is expected to register a CAGR of more than 5.4% during the forecast period 2022-2027. The COVID-19 pandemic has negatively impacted oil and gas activities across the globe. The decline was caused mainly due to delays in project construction activities and supply chain disruptions, which reduced demand for centrifugal pumps across the world. Factors such as increasing exploration and production activities in offshore deep-water oil and gas fields in regions like North America and Africa are expected to drive demand for the centrifugal pumps market. However, volatile crude oil and gas prices are likely to affect the centrifugal pumps market due to cost-cutting and delayed projects by the E&P companies.

* The oil and gas end-user segment is likely to dominate the centrifugal pumps market, owing to the increased use of different types of pumps in the upstream, midstream, and downstream sectors for a number of distinctly different applications.

* Moreover, technological developments that have rendered the deep-water and ultra-deep-water explorations are expected to increase oil production and provide opportunities for market growth during the forecast period.

* Asia-Pacific is expected to be the largest and fastest-growing region during the forecast period, owing to huge economic growth that has resulted in the development of industrial infrastructure.

Key Market Trends

Oil and Gas Segment to Dominate the Market

* Centrifugal pumps are used in the oil and gas sector to pump oil and petroleum products, liquefied gases, and other fluids during operations. The surge in the development of oil and gas infrastructure is expected to provide a huge thrust to the centrifugal pump market during the forecast period.

* As of 2020, global crude oil consumption reached 91297 thousand barrels per day. The increasing demand for crude oil is expected to drive the demand for centrifugal pumps across the globe.

* In April 2020, Atlas Copco launched a new addition to the WEDA submersible dewatering centrifugal pump range, named WEDA S50. The WEDA S range is designed for thick, soft, wet mud or other similar mixtures. These centrifugal pumps are ideally suited for construction dewatering, industrial, or refining applications.

* In August 2020, Weir Oil & Gas Dubai won a three-year contract from a national oil company in the UAE for servicing and repairing centrifugal pumps. The contract secures the provision of Weir Oil & Gas Rotating Equipment services, machine shop services, emergency manufacturing, site works, etc.

* With the IMO 2020 International (Maritime Organization) regulation implemented in January 2020, the increasing demand for low sulfur fuel is likely to force major refiners to upgrade the existing infrastructure in order to produce low sulfur fuels. With refineries expected to be revamped, the demand for centrifugal pumps is likely to increase over the next few years.

* Owing to the above points, the oil and gas segment is expected to dominate the centrifugal pumps market during the forecast period.

Asia-Pacific to Dominate the Market

* The industrial infrastructure in the Asia-Pacific region is witnessing growth on account of business-friendly policies. Most of the countries in Asia-Pacific are in a growing phase, and the high rate of population growth has led to an increased requirement for water supply.

* China was expected to account for the major growth in crude oil refining between 2020 and 2025 in Asia-Pacific. As of 2020, China's oil refinery capacity amounted to 16.7 million barrels per day.

* Crude oil consumption in the region has been growing at 3-4% in the past three years and accounted for around 35.2% of global consumption. Increasing population and industrialization have supported the growth in consumption. Demand for centrifugal pumps, which are used to transport crude oil, has increased significantly in the past few years.

* In January 2022, Kerala Water Authority started the construction of a water treatment plant at Aluva with a treatment capacity of 142 million liters per day (MLD). The plant is likely to cost INR 180 crore and is expected to be completed by 2024. Thus, such upcoming water treatment projects are likely to increase demand for centrifugal pumps during the forecast period.

* Moreover, according to the United Nations University Institute of Water, Environment, and Health, in 2020, high-income countries such as Singapore, UAE, Qatar, and China treated about 74% of the industrial and municipal wastewater they generated, and this ratio dropped to 43% in upper-middle-income countries and about 26% in lower-middle-income countries. With increasing awareness about the environment and growing water shortage, the demand for water treatment plants, and in turn, centrifugal pumps in water treatment plants are expected to increase in the developing countries of Asia-Pacific.

* Hence, the demand for oil products such as gasoline, heating oil, and liquefied petroleum gas is increasing day-to-day with a growing population and rapid urbanization. Therefore, to meet the existing demand, there is a need to set up new refineries, which, in turn, is expected to drive the centrifugal pump market in the Asia-Pacific region during the forecast period.

Competitive Landscape

The centrifugal pumps market is fragmented. Some of the key players in this market are Flowserve Corporation, Schlumberger Ltd, Baker Hughes Company, KSB SE & Co. KGaA, and Weir Group PLC, among others.

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

• 1.1 Scope of the Study
• 1.2 Market Definition
• 1.3 Study Assumptions

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET OVERVIEW

• 4.1 Introduction
• 4.2 Market Size and Demand Forecast in USD billion, till 2027
• 4.3 Recent Trends and Developments
• 4.4 Government Policies and Regulations
• 4.5 Market Dynamics
  • 4.5.1 Drivers
  • 4.5.2 Restraints
• 4.6 Supply Chain Analysis
• 4.7 Porter's Five Forces Analysis
  • 4.7.1 Bargaining Power of Suppliers
  • 4.7.2 Bargaining Power of Consumers
  • 4.7.3 Threat of New Entrants
  • 4.7.4 Threat of Substitute Products and Services
  • 4.7.5 Intensity of Competitive Rivalry

5 MARKET SEGMENTATION

• 5.1 Stage
  • 5.1.1 Single-stage Pumps
  • 5.1.2 Multi-stage Pumps
• 5.2 End User
  • 5.2.1 Oil and Gas
  • 5.2.2 Power Generation
  • 5.2.3 Other End Users
• 5.3 Impeller Type
  • 5.3.1 Open
  • 5.3.2 Partially Open
  • 5.3.3 Enclosed
• 5.4 Geography
  • 5.4.1 North America
  • 5.4.2 Europe
  • 5.4.3 Asia-Pacific
  • 5.4.4 South America
  • 5.4.5 Middle-East and Africa

6 COMPETITIVE LANDSCAPE

• 6.1 Mergers and Acquisitions, Joint Ventures, Collaborations, and Agreements
• 6.2 Strategies Adopted by Leading Players
• 6.3 Company Profiles
  • 6.3.1 Baker Hughes Company
  • 6.3.2 Dover Corporation
  • 6.3.3 Ebara Corporation
  • 6.3.4 Flowserve Corporation
  • 6.3.5 ITT Inc.
  • 6.3.6 KSB SE & Co. KGaA
  • 6.3.7 Ruhrpumpen Group
  • 6.3.8 Schlumberger Ltd
  • 6.3.9 Sulzer Ltd
  • 6.3.10 Weir Group PLC

7 MARKET OPPORTUNITIES AND FUTURE TRENDS