查看购物车
  • Traditional Chinese
  • English
  • Japanese
  • Korean
封面
市场调查报告书
商品编码
1197545

医疗废物容器市场 - 增长、趋势、COVID-19 影响和预测 (2023-2028)

Medical Waste Containers Market - Growth, Trends, and Forecasts (2023 - 2028)
出版日期: | 出版商: Mordor Intelligence | 英文 109 Pages | 商品交期: 2-3个工作天内

价格

※ 本网页内容可能与最新版本有所差异。详细情况请与我们联繫。

简介目录

预计在预测期内，医疗废物容器市场的复合年增长率为 6.96%。

由于感染冠状病毒的人数增加，医疗设施产生的医疗废物量显着增加。 在处理与 COVID-19 相关的医疗废物时要特别小心。 由于 COVID-19 产生的医疗废物增加，世界各地的一些当局製定了有关废物处理的战略。 例如，2020 年初，印度 CPCB 提供了管理、治疗和处置 COVID-19 患者治疗、诊断和隔离期间产生的废物的指南。 这对市场增长产生了积极影响。 此外，2021年8月，中国政府和联合国开发计划署将在尼泊尔联合发起一项新举措，帮助南亚七家医院改善医疗废物管理系统，减少COVID-19疫情期间产生的废物。帮助我更好地处理事情。 因此，COVID-19 对市场增长产生了重大影响。

随着世界人口的增加，患者数量不断增加，产生的医疗废物量也越来越大。 因此，随着医疗废物的增加，世界各国政府都在采取新措施来解决这个问题。 例如，在印度，环境与森林部（MoEF）于 1998 年出台了《医疗废物管理和处理条例》，并于 2003 年出台了《生物医学废物（管理和处理）（修订）条例》。我们有正式的和强制性的准则 中央污染控制委员会还发布了中央医疗废物管理计划 (CBWTF) 指南。

此外，越来越多的政府资助项目也在推动医疗废物管理市场的发展。 一些政府机构遵守医疗废物法。 示例包括职业安全与健康管理局 (OSHA)、CDC、美国 FDA、交通部 (DOT) 和缉毒局 (DEA)。 此外，世界各国政府的举措也在推动市场的增长。 例如，2021 年 8 月，印度政府有效地在比哈尔邦布克萨尔市启动了分散式生物医学垃圾焚烧炉。 Ganesh Engineering Works 开发的技术入选了由 Waste to Wealth Mission 于 2020 年 6 月发起的生物医学废物处理创新挑战赛。 因此，这些努力有望增加对医疗废物容器的需求，并进一步推动市场增长。

此外，根据印度政府环境、森林和气候变化联盟部 2021 年 7 月的报告，从 2020 年 6 月到 2021 年 6 月，印度大约有 56,898 吨 COVID-19 生物医学废物。据说，有些东西发生了。 同样，根据 2021 年 3 月发表的题为“英国医院废物流的碳足迹”的研究，英国国家卫生服务体系每年产生约 538,600 吨医疗废物。相比之下，美国产生 5.9 吨医疗废物。 因此，随着全球产生大量医疗废物，对妥善处置医疗废物容器的需求预计将增加，这有望在预测期内推动市场增长。

此外，随着慢性病负担的加重，广泛使用手术刀、针头和静脉注射等锋利医疗器械的外科手术正在全球范围内进行，增加了对医疗废物容器的需求。预计将推动市场增长. 例如，根据《世界外科杂誌》2020 年 9 月发表的一项研究报告，全球约 11% 的疾病负担需要手术和/或麻醉治疗，使得印度人口的手术需求估计有 3,646 台手术与全球估计每 100,000 人 5,000 台手术相比，每年将需要满足这一要求。 因此，随着全球外科手术需求的增加，预计医疗废物的数量也会增加，这有望在预测期内推动医疗废物容器市场的需求。

但是，预计集装箱破损和病原体传播将在预测期内抑制市场增长。

医疗垃圾容器市场趋势

化疗容器预计将在预测期内主导细分市场的增长

近几十年来，癌症的患病率一直在上升。 因此，癌症是全世界死亡的主要原因之一。 癌症患病率的上升和用于治疗的化疗的患病率上升是预测期内推动市场增长的主要因素。 例如，根据GLOBOCAN发布的统计数据，到2021年，全球癌症患者人数将超过1930万。 女性乳腺癌已超过肺癌成为女性最常见的诊断疾病，预计 2020 年将诊断出 230 万新病例。

此外，根据澳大利亚癌症协会的数据，估计 2021 年澳大利亚将诊断出 20,030 例新的乳腺癌病例（164 名男性和 19,866 名女性）。 美国国家生物技术信息中心 2021 年发表的一篇论文证实，三分之一的乳腺癌女性在化疗期间会出现中性粒细胞减少症。 随着癌症患病率的增加，对化疗的需求预计也会增加。 此外，当时使用的各种设备的安全处置需求也会增加。

因此，预计未来对化疗容器的需求会增加，这被认为有助于市场增长。

医疗垃圾容器市场有望由北美主导

在预测期内，北美地区预计将占据医用容器市场的很大份额。 诸如严格的医疗废物法规、增加的手术程序和大量医疗废物产生等因素预计将推动对医疗废物容器的需求。 例如，美国 FDA 建议立即将用过的针头和其他锐器放入 FDA 批准的锐器处理容器中。 此外，由于产生大量医疗废物的疫苗接种计划，COVID-19 对该地区的市场产生了重大影响。 例如，2022年8月25日，加拿大、墨西哥和美国分别接种了约8798万支、2.0967亿支和6.0077亿支疫苗。 因此，预计该地区的需求将增加，预计将在预测期内推动医疗废物容器市场的增长。

在北美地区，由于废物产生量大、外科手术数量增加等因素，美国有望成为医疗废物容器的主要市场。. 例如，根据美国骨科医师学会2020年的报告，2020年美国将有1560万人接受整容手术，其中230万人为整容手术，1320万人为微创整容手术。说 同样，根据美国心臟协会 2020 年的报告，美国每年大约进行 60 万例冠状动脉支架植入手术，预计将促进增长。

另外，根据美国医院协会2022年的报告，美国约有6093家医院，加之国内慢性病负担高，美国产生的医疗废物量将在2022年增加，预计将在预测期内带动医疗废物容器的需求。

因此，由于上述因素，预计北美地区在预测期内将占据医疗废物容器市场的很大份额，而美国可以说是该地区的主要市场。

医疗废物容器市场竞争者分析

大多数医疗废物容器由世界主要参与者製造。 拥有更多研究资金和更好的分销系统的市场领导者正在市场中站稳脚跟。 目前主导市场的公司包括 Becton、Dickinson and Company、Thermo Fisher Scientific Inc.、Bemis Manufacturing Company、Cardinal Health Inc. 和 Daniels Health。

其他好处

  • Excel 格式的市场预测 (ME) 表
  • 三个月的分析师支持

内容

第1章介绍

  • 研究假设和市场定义
  • 调查范围

第2章研究方法论

第 3 章执行摘要

第4章市场动态

  • 市场概览
  • 市场驱动因素
    • 增加对新型医疗废物容器创新的投资
    • 因未经处理的医疗废物而导致患病率增加
    • 制定政府环境保护政策
  • 市场製约因素
    • 容器破损导致疾病传播
  • 波特的五力分析
    • 新进入者的威胁
    • 买方/消费者议价能力
    • 供应商的议价能力
    • 替代品的威胁
    • 竞争公司之间的敌对关係

第 5 章市场细分（基于价值的市场规模：100 万美元）

  • 按废物类型
    • 一般垃圾
    • 传染性医疗废物
    • 危险医疗废物
    • 其他类型的废物
  • 按产品分类
    • 化疗容器
    • 生物危险废物容器
    • 用于医疗废物的锐器容器
    • 资源保护和恢復法案 (RCRA) 容器
    • 其他
  • 最终用户
    • 医院和私人诊所
    • 製药公司、生物技术公司、CRO
    • 学术研究所
    • 其他最终用户
  • 按地区
    • 北美
      • 美国
      • 加拿大
      • 墨西哥
    • 欧洲
      • 德国
      • 英国
      • 法国
      • 意大利
      • 西班牙
      • 其他欧洲地区
    • 亚太地区
      • 中国
      • 日本
      • 印度
      • 澳大利亚
      • 韩国
      • 其他亚太地区
    • 中东
      • 海湾合作委员会
      • 南非
      • 其他中东地区
    • 南美洲地区
      • 巴西
      • 阿根廷
      • 其他南美洲

第6章竞争格局

  • 公司简介
    • Becton, Dickinson and Company
    • Bemis Manufacturing Company
    • Bondtech Corporation
    • Daniels Health
    • Medgen Medical Products
    • Stericycle
    • Brockway Standard New Jersey Inc（Mauser Group）
    • Cardinal Health Inc.
    • Sharps Compliance Inc.
    • Thermo Fisher Scientific Inc.

第7章 市场机会与今后动向

简介目录
Product Code: 67470

The medical waste containers market is poised to record a CAGR of 6.96% during the forecast period.

Due to the increase in the coronavirus-infected population, the medical waste generated by health facilities had increased tremendously. Special care was taken when disposing of COVID-19-related medical waste. With the growth in medical waste generation during COVID-19, several authorities worldwide devised strategies for waste disposal. For instance, in early 2020, CPCB India provided guidelines for the management, treatment, and disposal of waste generated during the treatment, diagnosis, and confinement of COVID-19 patients. This has had a positive impact on market growth. Additionally, in August 2021, the Chinese government and the UNDP jointly launched a new initiative in Nepal to help seven hospitals in the South Asian country improve their healthcare waste management systems to handle better the waste generated during the COVID-19 pandemic. Thus, COVID-19 has had a significant impact on the growth of the market.

Global population growth is increasing the number of patients, increasing the volume of medical waste generated. Thus, with the increase in medical waste, governments worldwide are taking new steps to combat the issue. For example, in India, the Ministry of Environment and Forests (MoEF) introduced the Medical Waste Management and Handling Rules, 1998, and the Bio-Medical Waste (Management and Handling) (Amendment) Rules, 2003, to provide official and mandatory guidelines for health care waste management. The Central Pollution Control Board has also issued guidelines on Central Medical Waste Treatment Plans (CBWTF).

Moreover, a growing number of government-sponsored programs are also driving the market for medical waste management. Several government agencies adhere to laws relating to medical waste. These include the Occupational Safety and Health Administration (OSHA), the CDC, the US FDA, the Department of Transport (DOT), and the Drug Enforcement Administration (DEA). Additionally, the initiatives taken by the governments of different countries are also propelling the growth of the market. For instance, in August 2021, the Indian government virtually inaugurated a decentralized biomedical waste incinerator at Buxar Municipality, Bihar. The technology developed by Ganesh Engineering Works was selected through the Biomedical Waste Treatment Innovation Challenge launched in June 2020 by the Waste to Wealth Mission. Thus, such initiatives are expected to boost the demand for medical waste containers, which is further expected to boost the growth of the market.

Moreover, according to the July 2021 report from the Union Ministry of Environment, Forest, and Climate Change of the Government of India, from June 2020 to June 2021, about 56,898 tons of COVID-19 biomedical waste were generated in India. Similarly, according to a research study published in March 2021, titled "The Carbon Footprint of Waste Streams in a UK Hospital," the National Health Service of the United Kingdom generates about 538,600 tons of medical waste every year, as compared to the 5.9 metric tons generated in the United States. Thus, due to the production of a huge amount of medical waste worldwide, the demand for medical waste containers for adequate disposal is expected to increase, which is anticipated to fuel market growth over the forecast period.

Furthermore, the rising burden of chronic diseases is prompting an increase in the number of surgical procedures being performed around the world, in which sharp medical objects such as scalpels, needles, intravenous injections, and other devices are widely used, and thus, with the increase in the number of surgical procedures performed around the world, the demand for medical waste containers is expected to rise, which is expected to boost the market's growth. For instance, as per a research study published in September 2020 by the World Journal of Surgery, about 11% of the global burden of disease requires surgical or anesthesia care or both, and an estimated 3,646 surgeries would be required annually to meet the surgical needs of the Indian population, as compared to the global estimate, which is 5,000 surgeries per 100,000 people. Thus, with the rising demand for surgical procedures worldwide, the volume of medical waste is also expected to increase, which is expected to drive the demand for the medical waste containers market over the forecast period.

However, the breaking of containers and the spread of pathogens are expected to restrain the market's growth over the forecast period.

Medical Waste Containers Market Trends

Chemotherapy Containers are Expected to Dominate the Segment Growth During the Forecast Period

The prevalence of cancer has been on the rise in recent decades. As a result, cancer is one of the leading causes of death in the world. The rising prevalence of cancer and the increasing use of chemotherapy for its treatment are the key factors driving the market's growth over the forecast period. For instance, according to the statistics published by GLOBOCAN, in 2021, there were over 19.3 million cancer cases worldwide. In addition, female breast cancer has surpassed lung cancer as women's most commonly diagnosed disease, with an anticipated 2.3 million new cases diagnosed in 2020.

Moreover, as per Cancer Australia, in 2021, it was estimated that 20,030 new breast cancer cases were diagnosed in Australia (164 males and 19,866 females). According to an article published by the National Center for Biotechnology Information in 2021, it has been observed that during chemotherapy, one out of every three women with breast cancer develops neutropenia. As the prevalence of cancer increases, the demand for chemotherapy will also increase. This will also increase the demand for the safe disposal of various equipment used during the process.

Hence, the demand for chemotherapy containers is expected to rise in the future, which is expected to assist the market's growth.

North America is Expected to Dominate the Medical Waste Containers Market

The North American region is expected to hold a significant share of the medical container market over the forecast period. Factors like strict regulations regarding medical waste, increasing surgical procedures, and high medical waste generation are expected to propel the demand for medical waste containers. For example, the US FDA recommends that utilized needles and other sharp medical objects be immediately placed in FDA-cleared sharps disposal containers. Further, COVID-19 had a significant impact on the market in the region due to vaccination programs, which generated tons of medical waste. For instance, on August 25, 2022, the number of vaccines administered in Canada, Mexico, and the United States was about 87.98 million, 209.67 million, and 600.77 million, respectively. Hence, the demand for the medical waste containers market is expected to increase in the region, which is expected to boost the growth of the medical waste container market over the forecast period.

In the North American region, the United States is expected to be a major market for medical waste containers due to high waste generation, an increased number of surgical procedures, and several other factors. For instance, according to the 2020 report of the American Society of Plastic Surgeons, 15.6 million people had undergone cosmetic procedures in the United States in 2020, of which 2.3 million were cosmetic surgical procedures and 13.2 million were cosmetic minimally invasive procedures. Similarly, according to the 2020 report of the American Heart Association, about 600,000 coronary stent transplant procedures are performed every year in the United States, and hence, owing to the high number of surgeries in the country, the volume of waste is expected to be very high, which is expected to boost the market growth.

In addition, there were about 6,093 hospitals in the United States, as per the 2022 report of the American Hospital Association, and coupled with the high burden of chronic diseases in the country, the amount of medical waste produced in the United States is expected to increase over the forecast period, which is expected to drive the demand for the medical waste containers over the forecast period.

Therefore, due to the aforesaid factors, the North American region is expected to hold a significant share of the medical waste containers market over the forecast period, with the United States being the major market in the region.

Medical Waste Containers Market Competitor Analysis

The majority of medical waste containers are being manufactured by key global players. Market leaders with more funds for research and a better distribution system have established their positions in the market. Some of the companies currently dominating the market are Becton, Dickinson and Company, Thermo Fisher Scientific Inc., Bemis Manufacturing Company, Cardinal Health Inc., and Daniels Health, among others.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

  • 1.1 Study Assumptions and Market Definition
  • 1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET DYNAMICS

  • 4.1 Market Overview
  • 4.2 Market Drivers
    • 4.2.1 Rising Investment in Innovation of Novel Medical Waste Container
    • 4.2.2 Increasing Illnesses Due to Untreated Medical Waste
    • 4.2.3 Establishment of Government Policies for Conservation of the Environment
  • 4.3 Market Restraints
    • 4.3.1 Breaking of Containers leading to Spread of Illness
  • 4.4 Porter's Five Force Analysis
    • 4.4.1 Threat of New Entrants
    • 4.4.2 Bargaining Power of Buyers/Consumers
    • 4.4.3 Bargaining Power of Suppliers
    • 4.4.4 Threat of Substitute Products
    • 4.4.5 Intensity of Competitive Rivalry

5 MARKET SEGMENTATION (Market Size by Value - USD million)

  • 5.1 By Type of Waste
    • 5.1.1 General Medical Waste
    • 5.1.2 Infectious Medical Waste
    • 5.1.3 Hazardous Medical Waste
    • 5.1.4 Other Types of Waste
  • 5.2 By Product
    • 5.2.1 Chemotherapy Containers
    • 5.2.2 Biohazardous Medical Waste Containers
    • 5.2.3 Sharps Medical Waste Containers
    • 5.2.4 Resource Conservation and Recovery Act (RCRA) Containers
    • 5.2.5 Others
  • 5.3 By End User
    • 5.3.1 Hospitals and Private Clinics
    • 5.3.2 Pharmaceutical and Biotechnology Companies and CROs
    • 5.3.3 Academic Research Institutes
    • 5.3.4 Other End Users
  • 5.4 Geography
    • 5.4.1 North America
      • 5.4.1.1 United States
      • 5.4.1.2 Canada
      • 5.4.1.3 Mexico
    • 5.4.2 Europe
      • 5.4.2.1 Germany
      • 5.4.2.2 United Kingdom
      • 5.4.2.3 France
      • 5.4.2.4 Italy
      • 5.4.2.5 Spain
      • 5.4.2.6 Rest of Europe
    • 5.4.3 Asia-Pacific
      • 5.4.3.1 China
      • 5.4.3.2 Japan
      • 5.4.3.3 India
      • 5.4.3.4 Australia
      • 5.4.3.5 South Korea
      • 5.4.3.6 Rest of Asia-Pacific
    • 5.4.4 Middle East
      • 5.4.4.1 GCC
      • 5.4.4.2 South Africa
      • 5.4.4.3 Rest of Middle East
    • 5.4.5 South America
      • 5.4.5.1 Brazil
      • 5.4.5.2 Argentina
      • 5.4.5.3 Rest of South America

6 COMPETITIVE LANDSCAPE

  • 6.1 Company Profiles
    • 6.1.1 Becton, Dickinson and Company
    • 6.1.2 Bemis Manufacturing Company
    • 6.1.3 Bondtech Corporation
    • 6.1.4 Daniels Health
    • 6.1.5 Medgen Medical Products
    • 6.1.6 Stericycle
    • 6.1.7 Brockway Standard New Jersey Inc (Mauser Group)
    • 6.1.8 Cardinal Health Inc.
    • 6.1.9 Sharps Compliance Inc.
    • 6.1.10 Thermo Fisher Scientific Inc.

7 MARKET OPPORTUNITIES AND FUTURE TRENDS