移动液压阀市场——增长、趋势、COVID-19 影响和预测 (2023-2028)

在预测期内，移动液压阀市场预计将以 5% 左右的复合年增长率增长。

工业化和增加对建筑行业的投资以取代各国老化的基础设施是推动移动液压阀需求的主要因素。

主要亮点

• 通常，液压阀主要用于正确引导液压系统内液体介质（通常是油）的流动。 这些阀门是根据不同的最终用户要求和国际标准设计的。 移动式液压阀主要应用于起重机、叉车、挖掘机、播种机等移动式液压机械，应用于多种环境。
• 在过去几十年里，工业部门经历了显着增长，人口增长和快速城市化在这一增长中发挥了决定性作用。 考虑到工业部门与国家经济发展直接相关，各国政府都在努力进一步发展该地区的工业部门。 目前，许多移动机械用于工业领域，其增长预计将推动对移动液压阀的需求。
• 根据联合国工业发展组织 (UNIDO) 的数据，2022 年第二季度全球製造业产出将稳步增长，同比增长率为 3.1%。 工业化经济体增长2.6%，其他工业化经济体製造业产出同比增长10.4%。
• 叉车和起重机等移动式液压机械在农业领域的使用也在增加，主要是在发达国家。 移动式液压方向控制阀用于农业领域，因为它们运行平稳，精确流体控制的快速响应，使用液压系统的机器的压降低等。 因此，该细分市场有望为在移动液压阀市场运营的供应商提供充足的增长机会。
• 但是，这些阀门在暴露于温度变化的环境中的性能有限是阻碍市场增长的关键因素之一。 由于油对环境温度很敏感，突然的热量损失或增加会改变油的粘度并影响液压元件（包括阀门）的运行。 这些阀门必须在指定的压力限制内连续运行，以避免组件故障或洩漏。
• COVID-19 大流行对市场的增长产生了重大影响。 为遏制病毒传播而实施的广泛封锁对工业部门的生产力和日常运营产生了重大影响。 供应链中断也是影响工业增长的关键因素之一。 然而，由于全球放鬆管制，液压阀的所有主要终端用户行业都在上升，这有望对市场增长产生积极影响。

移动液压阀市场趋势

石油和天然气行业获得显着的市场份额

• 在过去几十年中，由于快速工业化和汽车行业的发展，石油和天然气行业经历了显着增长。 城市人口的扩张也对石油和天然气行业的增长做出了重大贡献。 根据世界银行的数据，到 2021 年，全球约 57% 的人口将居住在城市地区。
• 对石油产品需求的增加显着增加了对先进机械（包括起重机和叉车等大型车辆）的需求，从而推动了对移动液压设备的需求。 根据国际能源署的数据，预计原油日需求量将从 2020 年的 9100 万桶增加到 2026 年的 1.041 亿桶。
• 石油和天然气行业使用不同类型的移动液压阀。 例如，洩压阀通过抑制系统压力的波动来减轻下游设备的压力。 另一方面，导向活塞阀通过阀门的控制接口降低流量。 这些阀门可在低至 3 psi 至高达 1,000 psi 的压力范围内可靠运行，使其适用于范围广泛的石油和天然气设备应用。
• 多家供应商为石油和天然气行业提供移动液压阀。 例如，Panker Hannifen 的液压阀部门为石油和天然气行业提供了强大的阀门产品组合，并获得了广泛的防爆/危险区域认证。 该公司的 VPL 阀系列是适用于石油和天然气行业的移动设备的可堆迭、负载敏感、多节、压力补偿方向阀。

亚太地区将成为需求大区

• 亚太地区对移动液压阀的需求主要受到工业和汽车行业的推动。 在过去的几十年里，该地区已成为世界製造业中心。 许多跨国公司已在该地区建立製造基地，而且这一趋势可能会持续下去。 由于液压阀广泛应用于工业机械，该领域的增长有望对市场产生积极影响。
• 中国已成为亚太地区主要的製造业和工业部门，并且正在经历令人瞩目的增长。 中国国家统计局数据显示，2022 年 8 月工业生产同比增长 4.2%，为疫情以来连续第四个月增长。
• 印度和台湾等国家/地区也出现了类似的增长模式，支持性的政府法规和庞大的人口鼓励全球参与者进入市场。 例如，据 IBEF 称，印度有潜力成为世界製造业中心，到 2030 年每年可为全球经济贡献超过 5000 亿美元。
• 该国拥有大量外国直接投资 (FDI)，而製造业是其主要部门之一。 根据工业和内部贸易部 (DPIIT) 的数据，印度将在 2021-22 财年录得 587.7 亿美元的 FDI 流入。
• 农业也是一个重要部门，尤其是在印度、中国和孟加拉国。 这些国家的政府为精简农业做出了多项努力，包括更多地采用新的农业技术和机械。 预计此类发展将在预测期内支持市场的增长。

移动液压阀市场竞争者分析

移动液压阀市场竞争激烈，因为有多家老牌企业。 然而，越来越多的新玩家正在进入市场。 供应商正在采用有机和无机增长战略，以进一步增加他们在市场上的影响力。 市场上的主要参与者包括 Parker Hannifin Corp、Danfoss AS、Eaton Corporation PLC、OMAX Hydraulics Industrial 等。

• 2022 年 8 月 - Helios Technologies Inc. 推出了其运营公司 Sun Hydraulics 开发的最新产品。 Sun Common 插装阀旨在提供可互换的解决方案，是各种液压系统的理想选择，从需要多向流体流动的高要求应用到更表面的低压要求。旨在为以下领域提供可靠和通用的解决方案 这些解决方案提供了广泛的功能，并支持设计具有最佳接头腔的新液压系统解决方案。
• 2022 年 6 月 - 领先的阀门製造商 Bieri Hydraulik AG 推出了新的 1000bar 阀门系列 WV1000。 除了在 1000bar 高压下的高操作可靠性外，该阀门还具有高气密性和出色的耐腐蚀性。 该阀的高压范围还允许设计人员设计更紧凑和更轻便的液压系统。

其他好处

• Excel 格式的市场预测 (ME) 表
• 三个月的分析师支持

内容

第一章介绍

• 研究假设和市场定义
• 调查范围

第二章研究方法论

第 3 章执行摘要

第 4 章市场洞察

• 市场概览
• 工业价值链分析
• 产业吸引力 - 波特五力分析
  • 新进入者的威胁
  • 买家的议价能力
  • 供应商的议价能力
  • 替代品的威胁
  • 竞争公司之间的敌对关係
• 评估 COVID-19 对市场的影响

第 5 章市场动态

• 市场驱动力
  • 工业增长推动需求
  • 恢復基础设施投资并扩大液压设备的使用
• 市场製约因素
  • 液压设备的总拥有成本高

第 6 章市场细分

• 按类型
  • 方向控制阀
  • 压力控制阀
  • 流量控制阀
  • 电液阀
• 按最终用户行业
  • 石油和天然气
  • 汽车
  • 化工/石化
  • 农业
  • 建筑
  • 矿业
  • 其他最终用户行业
• 按地区
  • 北美
  • 欧洲
  • 亚太地区
  • 拉丁美洲
  • 中东

第七章竞争格局

• 公司简介
  • Parker Hannifin Corp.
  • Bosch Rexroth
  • Curtiss Wright
  • Danfoss AS
  • OMAX Hydraulics Industrial
  • Rexon Hydraulics
  • Eaton Corporation PLC
  • Bucher Hydraulics
  • Muncie Power Products（Interpump Group）
  • Teutonic Engineering
  • HYDAC International
  • Poclain Hydraulics

第8章 投资分析

第9章 市场未来性

The mobile hydraulic valves market is expected to record a CAGR of about 5% during the forecast period. The increasing industrialization and growing investment in the construction sector to replace the aging infrastructure across various countries are among the significant factors driving the demand for mobile hydraulic valves.

Key Highlights

• In general, hydraulic valves are primarily used to direct the flow of a liquid medium, usually oil, properly through the hydraulic system. These valves are designed according to different end-user requirements and international standards. Mobile hydraulic valves are mainly used with mobile hydraulic machines such as cranes, forklifts, excavators, and air seeders and are used in various environments.
• In the last few decades, the industrial sector witnessed significant growth, and the increasing population and rapid urbanization played a crucial role in the sector's growth. Considering the direct correlation of the industrial sector with the economic development of any country, governments across nations are further developing the local industrial sector. As many mobile types of machinery are currently being used in the industrial sector, its growth is expected to drive the demand for mobile hydraulic valves.
• According to the United Nations Industrial Development Organization (UNIDO), in Q2 2022, global manufacturing production grew at a stable pace, with a Y-o-Y growth rate of 3.1%. While the industrial economies registered a growth rate of 2.6%, the manufacturing output of other industrializing economies registered a Y-o-Y output growth of 10.4%.
• The use of mobile hydraulic machinery, such as forklifts and cranes, is also increasing in the agricultural sector, especially in developed countries. Mobile hydraulic directional control valves are used in the agricultural industry for smooth operation, rapid response for precise fluid control, and low-pressure drop in machinery using hydraulic systems. Hence, the sector is expected to offer ample growth opportunities to the vendors operating in the mobile hydraulic valves market.
• However, performance limitations of these valves in operating conditions exposed to temperature fluctuations are among the significant factors challenging the market's growth. As oil is prone to ambient temperature, fast heat loss or gain can cause changes in oil viscosity, affecting the operation of hydraulic components, including valves. These valves should continuously be operated within the specified pressure limits to avoid component failure or leakage.
• The COVID-19 pandemic had a notable impact on the growth of the market as the widespread lockdowns imposed to curb the spread of the virus significantly impacted the productivity and day-to-day operations of the industrial sector. Supply chain disruptions were also among the significant factors affecting the industrial sector's growth. However, with the easing of restrictions across the world, all the major end-user industries of hydraulic valves are expected to witness an upward trend, thus impacting the growth of market positively.

Mobile Hydraulic Valves Market Trends

Oil and Gas Sector to Hold Significant Market Share

• In the last few decades, the oil and gas industry witnessed remarkable growth, primarily due to rapid industrialization and the growth of the automotive industry. The expansion of the urban population also contributed significantly to the growth of the oil and gas industry. According to the World Bank, about 57% of the global population lived in urban areas in 2021.
• The increasing demand for petroleum products significantly drove the need for advanced machinery, including large vehicles such as cranes and forklifts, thus driving the demand for mobile hydraulic devices. According to the IEA, the daily need for crude oil is expected to increase from 91 million barrels per day in 2020 to 104.1 million barrels per day in 2026.
• Various types of mobile hydraulic valves are used in the oil and gas industry. For instance, a pressure relief valve reduces strain on downstream equipment by mitigating the system pressure fluctuation. In contrast, the guided piston valves reduce velocities through the controlling interface of the valve. These valves operate reliably at pressures as low as three psi and as high as 1,000 psi, making them suitable for a wide range of oil and gas equipment applications.
• Several vendors offer mobile hydraulic valves to the oil and gas industry. For instance, Panker Hannifen's Hydraulic Valve Division provides a robust portfolio of valves for the oil and gas sector with a wide range of explosion-proof/hazardous location certifications. Its VPL valve series is a stackable, load-sensing, multi-section, pressure-compensated directional valve for mobile equipment, suitable for the oil and gas industry.

Asia-Pacific to Become the Major Region in Terms of Demand

• The industrial and automotive sectors primarily drive the demand for mobile hydraulic valves in the Asia Pacific region. The region emerged as the global manufacturing hub in the past few decades. Most multinational companies have established and continue to set up their manufacturing units in this region due to the abundant availability of a low-cost, skilled workforce and supportive government regulations. As hydraulic valves are widely used in industrial machinery, the sector's growth is expected to impact the market positively.
• China has become the leading manufacturing and industrial sector in the Asia-Pacific region, witnessing remarkable growth. According to the National Bureau of Statistics of China, industrial production increased by 4.2% Y-o-Y in August 2022, i.e., the fourth consecutive month with increased industrial production following the pandemic.
• Countries such as India and Taiwan are witnessing a similar growth pattern as supportive government regulations and large populations are encouraging global players to enter these markets. For instance, according to the IBEF, India has the potential to become a global manufacturing hub, and by 2030, it can add more than USD 500 billion annually to the global economy.
• The country has received a significant amount of foreign direct investments (FDI) in its sectors, with manufacturing being one of the major sectors. According to the Department for Promotion of Industry and Internal Trade (DPIIT), in FY 2021-22, India received a total FDI inflow of USD 58.77 billion.
• Agriculture is another primary sector of the region, especially in India, China, and Bangladesh. The governments of these countries are taking several initiatives to streamline the agricultural industry, including the increasing adoption of new farming techniques and machinery. Such trends are expected to support the growth of the market during the forecast period.

Mobile Hydraulic Valves Market Competitor Analysis

The mobile hydraulic valves market is moderately competitive, with the presence of several established players. However, an increasing number of new players are also entering the market. The vendors are adopting organic and inorganic growth strategies to further expand their market presence. Some major players operating in the market include Parker Hannifin Corp, Danfoss AS, Eaton Corporation PLC, and OMAX Hydraulics Industrial.

• August 2022 - Helios Technologies Inc. launched its newest product developed by its operating company, Sun Hydraulics. Developed to offer cross-compatibility solutions, Sun Common cartridge valves are designed to provide reliable, universal solutions for various hydraulic systems, ranging from highly demanding applications requiring multidirectional fluid flow to more superficial, lower pressure requirements. These solutions offer a broad range of functions, enabling the design of new hydraulic system solutions with a joint cavity that fits best.
• June 2022 - Bieri Hydraulik AG, a leading valve manufacturer, launched the new 1000 bar valve series WV1000. In addition to high operational reliability at pressure as high as 1000 bar, the valve offers high tightness and good corrosion resistance. The higher pressure range of the valve also enables the designers to design more compact and lighter hydraulic systems.

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

• 1.1 Study Assumptions and Market Definition
• 1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET INSIGHTS

• 4.1 Market Overview
• 4.2 Industry Value Chain Analysis
• 4.3 Industry Attractiveness - Porter's Five Forces Analysis
  • 4.3.1 Threat of New Entrants
  • 4.3.2 Bargaining Power of Buyers
  • 4.3.3 Bargaining Power of Suppliers
  • 4.3.4 Threat of Substitute Products
  • 4.3.5 Intensity of Competitive Rivalry
• 4.4 Assessment of the Impact of COVID-19 on the Market

5 MARKET DYNAMICS

• 5.1 Market Drivers
  • 5.1.1 Growth of the Industrial Sector to Drive the Demand
  • 5.1.2 Renewed Investments in Infrastructure and Increased Penetration of Hydraulic Machinery
• 5.2 Market Restraints
  • 5.2.1 High Total Cost of Ownership of Hydraulic Equipment

6 MARKET SEGMENTATION

• 6.1 By Type
  • 6.1.1 Directional Control Valves
  • 6.1.2 Pressure Control Valves
  • 6.1.3 Flow Control Valves
  • 6.1.4 Electro-hydraulic Valves
• 6.2 By End-user Industry
  • 6.2.1 Oil and Gas
  • 6.2.2 Automotive
  • 6.2.3 Chemical and Petrochemical
  • 6.2.4 Agriculture
  • 6.2.5 Construction
  • 6.2.6 Mining
  • 6.2.7 Other End-user Industries
• 6.3 By Geography
  • 6.3.1 North America
  • 6.3.2 Europe
  • 6.3.3 Asia-Pacific
  • 6.3.4 Latin America
  • 6.3.5 Middle-East

7 COMPETITIVE LANDSCAPE

• 7.1 Company Profiles
  • 7.1.1 Parker Hannifin Corp.
  • 7.1.2 Bosch Rexroth
  • 7.1.3 Curtiss Wright
  • 7.1.4 Danfoss AS
  • 7.1.5 OMAX Hydraulics Industrial
  • 7.1.6 Rexon Hydraulics
  • 7.1.7 Eaton Corporation PLC
  • 7.1.8 Bucher Hydraulics
  • 7.1.9 Muncie Power Products (Interpump Group)
  • 7.1.10 Teutonic Engineering
  • 7.1.11 HYDAC International
  • 7.1.12 Poclain Hydraulics

8 INVESTMENT ANALYSIS

9 FUTURE OF THE MARKET