聚异丁烯 (PIB) 市场 - 增长、趋势、COVID-19 影响和预测 (2023-2028)

在预测期内，聚异丁烯 (PIB) 市场预计将以 5% 左右的复合年增长率增长。

市场增长的主要驱动力是粘合剂和密封剂行业不断增长的需求。 另一方面，聚异丁烯的抗紫外线不稳定性和 COVID-19 爆发造成的不利条件阻碍了市场增长。

主要亮点

• 聚异丁烯作为皮革製造填料中羊毛脂肪的替代品，有望为市场增长提供各种机会。
• 粘合剂和密封剂以及润滑剂行业在预测期内将成为需求方面的主导部分。
• 亚太地区主导着全球市场，其中中国、日本、韩国和印度等国家/地区的消费量最大。

聚异丁烯市场趋势

粘合剂和密封剂行业的需求增加

• 在预测期内，粘合剂和密封剂行业预计将以 5% 左右的复合年增长率增长。 聚异丁烯在粘合剂和密封剂行业的主要用途是接缝密封、电气线路密封和保护以及体腔防潮。 聚异丁烯以压敏胶和热熔胶的形式用于粘合剂体系，由于其粘性、柔韧性和低内聚力，主要用于PSA和热熔胶。
• 预计亚太地区住房建设的增长将成为压敏胶和热熔胶的推动因素。 聚异丁烯密封胶用于防潮、橡胶屋顶修復和屋顶膜维护。
• 2020 年，印度、中国和美国等主要国家/地区的住宅建筑增长率预计分别为 9%、4% 和 3%。 因此，预计消费国的粘合剂和密封剂行业对聚异丁烯的需求将增加。
• 在预测期内，粘合剂和密封剂行业预计将主导全球聚异丁烯市场。

预计亚太地区将主导市场

• 预计在预测期内，亚太地区将主导聚异丁烯市场。 该地区主导着轮胎内胎、粘合剂和密封剂、润滑剂、增塑剂、燃料添加剂和电绝缘等应用市场。
• 聚异丁烯广泛用于润滑油，以将润滑油的粘度调节/提高至所需的最终粘度。 由于可燃性降低、齿轮磨损减少和使用寿命延长等改进的性能，润滑油市场目前正在推动对高性能润滑油的需求增加。
• 将聚异丁烯添加到燃料中以改善其粘弹性。 聚异丁烯的衍生物用作无灰分散剂（如 PIBSA），以最大限度地减少沉积物并防止油稠化和油泥形成。 实施严格的环境法规和提高消费者意识也将推动该地区的市场。 亚太地区燃料添加剂市场预计将以 5% 左右的复合年增长率显着增长。
• 因此，预计上述聚异丁烯应用需求的增加将推动亚太地区的市场增长。

聚异丁烯市场竞争者分析

聚异丁烯 (PIB) 市场是一个分散的市场，既有国际参与者，也有国内参与者。 领先的公司包括 BASF SE、Braskem、Dowpol Corporation、TPC Group 和 The Lubrizol Corporation。

其他好处

• Excel 格式的市场预测 (ME) 表
• 三个月的分析师支持

内容

第一章介绍

• 调查先决条件
• 调查范围

第二章研究方法论

第 3 章执行摘要

第四章市场动态

• 司机
  • 粘合剂和密封剂的需求增加
  • 其他司机
• 约束因素
  • 抗紫外线能力差的聚异丁烯不稳定
  • 由于 COVID-19 爆发导致的不利情况
• 工业价值链分析
• 波特的五力分析
  • 供应商的议价能力
  • 买家的议价能力
  • 新进入者的威胁
  • 替代品的威胁
  • 竞争程度

第 5 章市场细分

• 用法
  • 内胎
  • 粘合剂和密封剂
  • 润滑剂
  • 增塑剂
  • 燃料添加剂
  • 电气绝缘
  • 其他用途
• 按地区
  • 亚太地区
    • 中国
    • 印度
    • 日本
    • 韩国
    • 其他亚太地区
  • 北美
    • 美国
    • 墨西哥
    • 加拿大
  • 欧洲
    • 德国
    • 英国
    • 意大利
    • 法国
    • 其他欧洲
  • 南美洲
    • 巴西
    • 阿根廷
    • 其他南美洲
  • 中东
    • 沙特阿拉伯
    • 南非
    • 其他中东地区

第六章竞争格局

• 併购、合资企业、联合研究、合同
• 市场份额 (%)/排名分析
• 主要参与者采用的策略
• 公司简介
  • BASF SE
  • Braskem
  • Dowpol Corporation
  • Exxon Mobil Corporation
  • JXTG Nippon Oil & Energy Corporation
  • Kemipex
  • The Lubrizol Corporation
  • TPC Group
  • SABIC
  • Shandong Hongrui New Material Technology Co. Ltd
  • Zhejiang Shunda New Material Co. Ltd

第七章市场机会与未来趋势

• 聚异丁烯作为皮革製造填充物中羊毛脂肪的替代品
• 其他机会

The market for Polyisobutylene (PIB), is expected to witness a CAGR of about 5% during the forecast period. The major factor driving the market studied is increasing demand from the adhesives and sealants industry. On the flipside, instability of polyisobutylene being non-UV resistant and unfavorable conditions arising due to the COVID-19 outbreak, are hindering the growth of the market.

Key Highlights

• Polyisobutylene, as a substitute for wool fat in stuffing agents for the production of leather, is expected to offer various opportunities for the growth of the market.
• Adhesives and sealants and lubricant industries are the dominant segments, in terms of demand, over the forecast period.
• Asia-Pacific region dominates the market globally, with the most substantial consumption from countries like China, Japan, South Korea, and India.

Polyisobutylene Market Trends

Increasing Demand from Adhesives & Sealants Industry Segment

• The adhesive and sealant industry is anticipated to witness a CAGR of approximately 5% during the forecast period. Major applications of the polyisobutylene in the adhesive and sealant industry are to seal joints, to seal and protect electrical wirings, and to protect body cavities from moisture. Polyisobutylene is used in adhesive systems in the form of pressure-sensitive and hot-melt adhesives, and are used due to their tackiness, flexibility, and low cohesive strength, mainly in PSAs and hot-melt adhesives.
• Growth in residential construction in the Asia-Pacific region is expected to act as a driver for pressure sensitive and hot melt adhesives. Polyisobutylene sealant is used for damp proofing, rubber roof repair, and maintenance of roof membranes.
• The residential construction growth rate estimations for 2020 for significant economies like India, China, and the United States are 9%, 4%, and 3%, respectively. This, in turn, is likely to create a demand for polyisobutylene from the adhesive and sealant industry in the consuming countries.
• The adhesives & sealants industry is expected to dominate the global polyisobutylene market over the forecast period.

Asia-Pacific Region to Dominate the Market

• Asia-Pacific is expected to be the dominant market for polyisobutylene during the forecast period. It is because the region dominates the market for applications such as tire tubes, adhesives and sealants, lubricants, plasticizers, fuel additives, and electrical insulation.
• Polyisobutylene is widely used in lubricants for modifying/improving the viscosity of the lubricant formulations to the desired final viscosity. The lubricants market is currently witnessing an increasing demand for high-performance lubricants, owing to their better and improved properties, such as reduced flammability, reduced gear wear, and increased service life.
• Polyisobutylene is added to fuel to improve the viscoelastic property. Derivatives of polyisobutylene are used as ash-less dispersants (such as PIBSA) to minimize deposits and prevent oil thickening and formation of sludge. The implementation of stringent environmental regulations and awareness among consumers in the region will also boost the market. The Asia-Pacific fuel additives market is estimated to witness significant growth, at an estimated CAGR of about 5%.
• Thus, rising demands from the polyisobutylene applications mentioned above are expected to drive the growth of the market in the Asia-Pacific region.

Polyisobutylene Market Competitor Analysis

The polyisobutylene (PIB) market is fragmented with the presence of both international and domestic players in the market. The major companies include BASF SE, Braskem, Dowpol Corporation, TPC Group, and The Lubrizol Corporation, among others.

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 Introduction

• 1.1 Study Assumptions
• 1.2 Scope of the Study

2 Research Methodology

3 Executive Summary

4 Market Dynamics

• 4.1 Drivers
  • 4.1.1 Increasing Demand from Adhesives and Sealants
  • 4.1.2 Other Drivers
• 4.2 Restraints
  • 4.2.1 Instability of Polyisobutylene being Non-UV Resistant
  • 4.2.2 Unfavorable Conditions Arising due to the COVID-19 Outbreak
• 4.3 Industry Value Chain Analysis
• 4.4 Porter's Five Forces Analysis
  • 4.4.1 Bargaining Power of Suppliers
  • 4.4.2 Bargaining Power of Buyers
  • 4.4.3 Threat of New Entrants
  • 4.4.4 Threat of Substitute Products and Services
  • 4.4.5 Degree of Competition

5 Market Segmentation

• 5.1 Application
  • 5.1.1 Tire Tubes
  • 5.1.2 Adhesive and Sealants
  • 5.1.3 Lubricants
  • 5.1.4 Plasticizers
  • 5.1.5 Fuel Additives
  • 5.1.6 Electrical Insulation
  • 5.1.7 Other Applications
• 5.2 Geography
  • 5.2.1 Asia-Pacific
    • 5.2.1.1 China
    • 5.2.1.2 India
    • 5.2.1.3 Japan
    • 5.2.1.4 South Korea
    • 5.2.1.5 Rest of Asia-Pacific
  • 5.2.2 North America
    • 5.2.2.1 United States
    • 5.2.2.2 Mexico
    • 5.2.2.3 Canada
  • 5.2.3 Europe
    • 5.2.3.1 Germany
    • 5.2.3.2 United Kingdom
    • 5.2.3.3 Italy
    • 5.2.3.4 France
    • 5.2.3.5 Rest of Europe
  • 5.2.4 South America
    • 5.2.4.1 Brazil
    • 5.2.4.2 Argentina
    • 5.2.4.3 Rest of South America
  • 5.2.5 Middle-East
    • 5.2.5.1 Saudi Arabia
    • 5.2.5.2 South Africa
    • 5.2.5.3 Rest of Middle-East

6 Competitive Landscape

• 6.1 Merger and Acquisitions, Joint Ventures, Collaborations, and Agreements
• 6.2 Market Share (%)/Ranking Analysis**
• 6.3 Strategies Adopted by Leading Players
• 6.4 Company Profiles
  • 6.4.1 BASF SE
  • 6.4.2 Braskem
  • 6.4.3 Dowpol Corporation
  • 6.4.4 Exxon Mobil Corporation
  • 6.4.5 JXTG Nippon Oil & Energy Corporation
  • 6.4.6 Kemipex
  • 6.4.7 The Lubrizol Corporation
  • 6.4.8 TPC Group
  • 6.4.9 SABIC
  • 6.4.10 Shandong Hongrui New Material Technology Co. Ltd
  • 6.4.11 Zhejiang Shunda New Material Co. Ltd

7 Market Opportunities and Future Trends

• 7.1 Polyisobutylene as Substitute for Wool Fat in Stuffing Agents for the Production of Leather
• 7.2 Other Opportunities