查看购物车
  • Traditional Chinese
  • English
  • Japanese
  • Korean
封面
市场调查报告书
商品编码
1404363

气相二氧化硅 -市场占有率分析、产业趋势与统计、2024-2029 年成长预测

Fumed Silica - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts 2024 - 2029
出版日期: | 出版商: Mordor Intelligence | 英文 120 Pages | 商品交期: 2-3个工作天内

价格

※ 本网页内容可能与最新版本有所差异。详细情况请与我们联繫。

简介目录

气相二氧化硅市场规模预计到 2024 年为 305.28 Kt，预计到 2029 年将达到 386.47 Kt，在预测期（2024-2029 年）复合年增长率为 4.83%。

气相二氧化硅-市场-IMG1

2020 年，市场受到 COVID-19 大流行的负面影响。疫情导致建筑和汽车製造活动暂时停止。这最大限度地减少了对黏剂、油漆、被覆剂、塑胶和复合材料等产品配方中使用的添加剂的需求，从而对气相二氧化硅的市场需求产生了负面影响。然而，随着所有行业重新启动生产流程，去年市场保持了成长轨迹。

主要亮点

  • 短期内，牙膏、乳霜等个人护理产品对气相二氧化硅的需求预计将激增，推动市场成长。
  • 生物来源二氧化硅和沈淀二氧化硅作为气相二氧化硅替代品的开拓预计将阻碍市场成长。
  • 气相二氧化硅在各行业的新应用可能会带来机会。
  • 亚太地区主导全球市场，其中中国和印度等国家的消费量最高。

气相二氧化硅市场趋势

对黏剂和密封剂领域的需求增加

  • 在黏剂和密封剂中，气相二氧化硅用于增加产品黏度，改善储存过程中的防沉降性能，控制涂布中的挤压成型性能，并在固化过程中赋予防流挂性能。添加剂还可作为增强剂，改善固化密封剂的物理性能，尤其是其撕裂强度。
  • 此外，黏剂和密封剂在建筑业中也有应用，可用于地毯安装、檯面层压、干墙层压、瓷砖黏合、空调设定等。
  • 在建设产业，气相二氧化硅黏剂和密封剂用于结构嵌装玻璃和防风雨，有助于提高建筑物的能源效率。它还有助于提高工厂的生产力、消除材料浪费、延长建筑寿命并降低生命週期成本。
  • 根据土木工程师学会预测，到 2025 年，中国、印度和美国预计将占全球建筑业成长的近 60%，推动气相二氧化硅市场成长。
  • 美国是世界上最大的建筑市场之一。根据美国人口普查局的数据，到2022年，建设业将成为美国第12大产业，约占GDP总量的4.3%。根据美国人口普查局的数据，2022年美国建筑业市场规模约为1.79兆美元。
    • 根据美国人口普查局的数据，2023年1月至9月的建筑支出为14,635亿美元，比2022年同期的13,989亿美元增加4.6%。
  • 在欧洲， 黏剂木工的製造商正在转向透明包装，使用不透明的增强助剂和用于流变控制的增强剂，与透明聚合物的屈光紧密匹配，已被气相二氧化硅所取代。
  • 经过处理的气相二氧化硅可显着提高黏合强度。气相二氧化硅的比重比碳酸钙低，对黏剂重量的贡献也小得多，因此可用于需要考虑黏剂重量的应用，例如汽车製造。
  • 汽车工业是黏剂和密封剂的主要消费者之一。应用包括密封热交换器管、密封变速箱和油底壳黏合以及黏合内部仪表板。根据OICA统计，2022年全球汽车产量达8,502万辆，比上年的8,020万辆成长6%。
  • 因此，预计这些因素将对预测期内的气相二氧化硅市场产生重大影响。
气相二氧化硅-市场-IMG2

亚太地区主导市场需求

  • 亚太地区占最大份额，中国和印度等国家的需求量很大。
  • 硅胶黏剂的製造首先是将二氧化硅与有机硅分离。二氧化硅以纯净形式存在于某些矿物中。硅胶黏剂因其优异的合成橡胶性能、宽温度范围、耐燃料效应以及低收缩和剪切应力而广泛应用。
  • 中国、印度和越南等亚太国家的建设活动成长强劲，预计将在预测期内推动该地区气相二氧化硅的消费。
  • 中国和印度占亚太地区黏剂和密封剂市场总份额的50%以上。它也是亚太地区最大的油漆和被覆剂生产商。
    • 2023年1月，亚洲涂料核准投资200亿印度卢比（2.4053亿美元）在印度中央邦新建一座年产40千万公升的水性涂料製造厂。该工厂预计将在三年内开始生产。
    • 2022年7月，BASF欧洲公司透过子公司BASF涂料（广东）（BCG）扩大了位于中国南方广东省江门市的涂料工厂的汽车修补漆产能。透过本次扩建计划，公司产能已增加至3万吨/年。
  • 印度製药业是气相二氧化硅的主要消费者，气相二氧化硅被用作高纯度赋形剂和多功能添加剂。该国是世界上最大的学名药供应国，满足美国40%的非专利需求和英国25%的药品总需求。
  • 气相二氧化硅用于许多要求苛刻的黏剂应用，从建筑、施工、汽车应用到包装。黏剂和密封剂领域的高需求预计将推动气相二氧化硅市场的发展。
  • 在建设产业，气相二氧化硅用于黏剂、密封剂、被覆剂和塑胶。中国的建筑业正在经历显着成长。根据中国国家统计局数据，2022年中国建筑业产值达到高峰约4.64兆美元。与 2021 年的 4.36 兆美元相比，成长了 6%。
  • 黏剂、密封剂、油漆和被覆剂在汽车工业中也有应用。亚太地区的汽车製造业是全球最大的。根据OICA预测，2022年亚太地区汽车产量将达到5,002万辆，比2021年的4,677万辆成长7%。
  • 上述因素预计将在预测期内增加亚太地区对气相二氧化硅的需求。

气相二氧化硅产业概况

气相二氧化硅市场几近整合。主要参与企业（排名不分先后）包括 Evonik Industries AG、Cabot Corporation、Wacker Chemie AG、Tokuyama Corporation 和 OCI COMPANY Ltd。

其他福利：

  • Excel 格式的市场预测 (ME) 表
  • 3 个月的分析师支持

目录

第一章简介

  • 研究假设和市场定义
  • 调查范围

第二章调查方法

第三章执行摘要

第四章市场动态

  • 促进因素
    • 亚太地区个人护理应用需求快速成长
    • 油漆和涂料行业的需求增加
    • 其他司机
  • 抑制因素
    • 沉淀二氧化硅作为替代品
    • 生物气相二氧化硅的开发
  • 价值链分析
  • 波特五力分析
    • 供应商的议价能力
    • 买方议价能力
    • 新进入者的威胁
    • 替代品的威胁
    • 竞争程度

第五章市场区隔（市场规模（基于数量））

  • 类型
    • 亲水性气相二氧化硅
    • 疏水性气相二氧化硅
  • 目的
    • 硅胶橡胶
    • 塑胶/复合材料（不饱和聚酯树脂）
    • 食品和饮料
    • 油漆（包括油墨）
    • 黏剂和密封剂
    • 其他用途（医药、个人护理、化学肥料）
  • 地区
    • 亚太地区
      • 中国
      • 印度
      • 日本
      • 韩国
      • 其他亚太地区
    • 北美洲
      • 美国
      • 加拿大
      • 墨西哥
    • 欧洲
      • 德国
      • 英国
      • 法国
      • 义大利
      • 欧洲其他地区
    • 南美洲
      • 巴西
      • 阿根廷
      • 南美洲其他地区
    • 中东/非洲
      • 沙乌地阿拉伯
      • 南非
      • 中东和非洲其他地区

第六章竞争形势

  • 併购、合资、联盟、协议
  • 市场占有率(%)**/排名分析
  • 主要企业策略
  • 公司简介
    • AMS Applied Material Solutions
    • Cabot Corporation
    • China-Henan Huamei Chemical Co. Ltd
    • Dongyue Group Co. Ltd
    • Evonik Industries AG
    • Gelest Inc.
    • Heraeus Holding
    • Kemitura AS
    • Kemipex
    • OCI Company Ltd
    • Tokuyama Corporation
    • Wacker Chemie AG

第七章 市场机会及未来趋势

  • 气相二氧化硅的新用途
  • 气相二氧化硅永续生产新技术
简介目录
Product Code: 61016
Fumed Silica - Market - IMG1

The Fumed Silica Market size is estimated at 305.28 kilotons in 2024, and is expected to reach 386.47 kilotons by 2029, growing at a CAGR of 4.83% during the forecast period (2024-2029).

The market was negatively impacted by the COVID-19 pandemic in 2020. Construction and automotive manufacturing activities were on a temporary halt due to the pandemic. This minimized the demand for additives used in the formulation of products such as adhesives, paints, coatings, plastics, and composites, negatively impacting the market demand for fumed silica. However, the market retained its growth trajectory last year due to all the industries resuming production processes.

Key Highlights

  • Over the short term, the surging demand for fumed silica from products in the personal care segment, such as toothpaste, creams, and others, is expected to drive the market's growth.
  • The development of biogenic fumed silica and precipitated silica as a substitute for fumed silica is anticipated to hinder the market's growth.
  • The emerging applications of fumed silica in various industries are likely to act as an opportunity.
  • The Asia-Pacific region dominated the global market, with the highest consumption coming from countries such as China and India.

Fumed Silica Market Trends

Increasing Demand from the Adhesives and Sealants Segment

  • In adhesives and sealants, fumed silica is used to increase the product viscosity, improve anti-settling properties during storage, control the extrusion properties during the application, and impart anti-sag properties during cure. The additive can also act as a reinforcing agent to improve the physical properties, especially the tear strength of the cured sealant.
  • Further, adhesives and sealants are applied in the construction industry, where they can be used for carpet laying, countertop lamination, drywall lamination, ceramic tile adhesion, air conditioning setup, and others.
  • In the construction industry, fumed silica adhesives and sealants are used in structural glazing and weatherproofing, contributing to the energy efficiency of buildings. They also help improve in-shop productivity, reduce material waste, extend building life, and reduce lifecycle costs.
  • According to the Institution of Civil Engineers, China, India, and the United States are expected to account for almost 60% of all global growth in the construction sector by 2025, thus increasing the market growth of fumed silica in the industry.
  • The United States was among the top construction markets globally. As per the United States Census Bureau, construction was the 12th largest industry in the country in 2022 and accounted for approximately 4.3% of its total GDP. As per the US Census Bureau, the market size of the US construction sector was around USD 1.79 trillion in 2022.
    • According to the US Census Bureau, during the first nine months of 2023, construction spending amounted to USD 1,463.5 billion, 4.6% above the USD 1,398.9 billion for the same period in 2022.
  • In Europe, manufacturers in the do-it-yourself (DIY) adhesives market have switched to clear packaging, where the opaque reinforcing aids additives used for rheology control and the reinforcements are replaced by fumed silica, which closely matches its refractive index with transparent polymers.
  • Treated fumed silica provides significantly more adhesive strength. It has a lower specific gravity than calcium carbonate and contributes far less to adhesive weight, which can benefit applications where adhesive weight is a concern, such as automotive manufacturing.
  • The automotive industry is one of the major consumers of adhesives and sealants. The applications include sealing heat exchanger tubes, gearbox and sump cover gasketing, bonding interior dashboards, and others. According to the OICA, global vehicle production reached 85.02 million units in 2022, with an increase of 6% from the previous year's production of 80.20 million units.
  • Therefore, such factors are expected to impact the fumed silica market significantly over the forecast period.
Fumed Silica - Market - IMG2

Asia-Pacific Region to Dominate Market Demand

  • The Asia-Pacific region dominated the market with the largest share and high demand from countries such as China and India.
  • The manufacture of silicone adhesives begins by isolating silica from silicon. Silica can be found in its pure form in some minerals. Silicone adhesives are widely used due to their excellent elastomeric properties, extended temperature range, resistance to the effects of fuels, and low shrinkage and shear stress.
  • Countries in the Asia-Pacific region, such as China, India, and Vietnam, have been registering strong growth in construction activities, which is expected to drive the consumption of fumed silica in the region over the forecast period.
  • China and India contribute to more than 50% of the total share of the Asia-Pacific region in the adhesives and sealants market. They are also the largest producer of paints and coatings in the Asia-Pacific region.
    • In January 2023, Asian Paints approved an investment of INR 2,000 crore (USD 240.53 million) for a new waterborne paint manufacturing plant with 400,000 kiloliters per annum capacity in Madhya Pradesh, India. The facility's manufacturing is expected to be commissioned in three years.
    • In July 2022, BASF SE, through its subsidiary BASF Coatings (Guangdong) Co. Ltd (BCG), expanded its manufacturing capabilities for automotive refinish coatings at its coatings site in Jiangmen, Guangdong Province, South China. The company increased its production capacity to 30,000 ton annually through this expansion project.
  • The pharmaceutical industry in India is a major consumer of fumed silica, used as a high-purity excipient and multi-functional additive. The country is the largest provider of generic drugs globally, fulfilling 40% of the generic demand in the United States and 25% of all medicine demand in the United Kingdom.
  • Fumed silica is used in many demanding adhesive applications, from building, construction, and automotive applications to packaging. High demand from the adhesives and sealants sector is expected to drive the fumed silica market.
  • In the construction industry, fumed silica is used in adhesives, sealants, coatings, and plastics. China is experiencing massive growth in its construction sector. According to the National Bureau of Statistics of China, the construction output value in China achieved its peak at around USD 4.64 trillion in 2022. It rose by 6% compared to USD 4.36 trillion in 2021.
  • Adhesives, sealants, paints, and coatings are also finding application in the automotive industry. The Asia-Pacific automotive manufacturing industry is the largest in the world. According to the OICA, automotive production in Asia-Pacific stood at 50.02 million units in 2022, up 7% from 46.77 million units in 2021.
  • The factors above are expected to increase the demand for fumed silica in the Asia-Pacific region over the forecast period.

Fumed Silica Industry Overview

The fumed silica market is mostly consolidated. The major players (not in any particular order) include Evonik Industries AG, Cabot Corporation, Wacker Chemie AG, Tokuyama Corporation, and OCI COMPANY Ltd, among others.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

  • 1.1 Study Assumptions and Market Definition
  • 1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET DYNAMICS

  • 4.1 Drivers
    • 4.1.1 Surging Demand from Personal Care Applications in the Asia-Pacific Region
    • 4.1.2 Increasing Demand from the Paints and Coatings Industry
    • 4.1.3 Other Drivers
  • 4.2 Restraints
    • 4.2.1 Precipitated Silica as a Substitute
    • 4.2.2 Development of Biogenic Fumed Silica
  • 4.3 Industry Value Chain Analysis
  • 4.4 Porter's Five Forces Analysis
    • 4.4.1 Bargaining Power of Suppliers
    • 4.4.2 Bargaining Power of Buyers
    • 4.4.3 Threat of New Entrants
    • 4.4.4 Threat of Substitute Products and Services
    • 4.4.5 Degree of Competition

5 MARKET SEGMENTATION (Market Size in Volume)

  • 5.1 Type
    • 5.1.1 Hydrophilic Fumed Silica
    • 5.1.2 Hydrophobic Fumed Silica
  • 5.2 Application
    • 5.2.1 Silicone Rubber
    • 5.2.2 Plastics and Composites (Unsaturated Polyester Resin)
    • 5.2.3 Food and Beverages
    • 5.2.4 Paints and Coatings (Including Inks)
    • 5.2.5 Adhesives and Sealants
    • 5.2.6 Other Applications (Pharmaceutical, Personal Care, and Chemicals and Fertilizers)
  • 5.3 Geography
    • 5.3.1 Asia-Pacific
      • 5.3.1.1 China
      • 5.3.1.2 India
      • 5.3.1.3 Japan
      • 5.3.1.4 South Korea
      • 5.3.1.5 Rest of Asia-Pacific
    • 5.3.2 North America
      • 5.3.2.1 United States
      • 5.3.2.2 Canada
      • 5.3.2.3 Mexico
    • 5.3.3 Europe
      • 5.3.3.1 Germany
      • 5.3.3.2 United Kingdom
      • 5.3.3.3 France
      • 5.3.3.4 Italy
      • 5.3.3.5 Rest of Europe
    • 5.3.4 South America
      • 5.3.4.1 Brazil
      • 5.3.4.2 Argentina
      • 5.3.4.3 Rest of South America
    • 5.3.5 Middle East and Africa
      • 5.3.5.1 Saudi Arabia
      • 5.3.5.2 South Africa
      • 5.3.5.3 Rest of Middle East and Africa

6 COMPETITIVE LANDSCAPE

  • 6.1 Mergers and Acquisitions, Joint Ventures, Collaborations, and Agreements
  • 6.2 Market Share (%)**/Ranking Analysis
  • 6.3 Strategies Adopted by Leading Players
  • 6.4 Company Profiles
    • 6.4.1 AMS Applied Material Solutions
    • 6.4.2 Cabot Corporation
    • 6.4.3 China-Henan Huamei Chemical Co. Ltd
    • 6.4.4 Dongyue Group Co. Ltd
    • 6.4.5 Evonik Industries AG
    • 6.4.6 Gelest Inc.
    • 6.4.7 Heraeus Holding
    • 6.4.8 Kemitura AS
    • 6.4.9 Kemipex
    • 6.4.10 OCI Company Ltd
    • 6.4.11 Tokuyama Corporation
    • 6.4.12 Wacker Chemie AG

7 MARKET OPPORTUNITIES AND FUTURE TRENDS

  • 7.1 Emerging Applications of Fumed Silica
  • 7.2 New Technology for Sustainable Production of Fumed Silica