中东和非洲汽车黏合剂和密封剂市场占有率分析、行业趋势、统计数据和预测（2025-2030 年）

预计 2024 年中东和非洲汽车黏合剂和密封剂市场规模将达到 2.7602 亿美元，预计到 2028 年将达到 3.5952 亿美元，预测期内（2024-2028 年）的复合年增长率为 6.83%。

该地区对电动车的采用和需求将推动市场成长

• 中东和非洲汽车工业的成长导致对汽车黏合剂和密封剂的需求增加。南非等非洲主要国家的汽车产量正在上升，占2020年全球汽车产量的0.58%，并且由于电动车的采用和需求，预计在2022-2028年的预测期内将大幅增长。预计这一趋势将在 2022-2028 年预测期内推动汽车製造所需的黏合剂和密封剂的需求。
• 2020 年新冠疫情导致经济放缓和价值链中断，严重影响了中东和北非地区的汽车产业。不过，沙乌地阿拉伯降低15%的进口关税、中东国家降低燃油价格等政府支持措施，带动汽车需求快速復苏，提振了2021年汽车胶合剂和密封剂的需求。
• 汽车工业主要使用的树脂是环氧树脂、聚氨酯和丙烯酸基树脂，因为它们与构成汽车整个结构的各种基材（如陶瓷、塑胶、玻璃、金属和复合材料）具有广泛的兼容性。聚氨酯树脂在汽车製造中用作聚氨酯反应性（PUR）黏合剂。
• VAE/EVA黏合剂是中东和非洲汽车产业发展最快的技术。由于热熔胶的市场需求逐渐超过溶剂型胶合剂，预计预测期内（2022-2028 年）这些胶合剂的复合年增长率将达到 8.24%。

汽车产业取代笨重金属框架的技术发展正在推动市场成长

• 现代和中东和非洲的其他主要汽车製造商正在努力减轻汽车重量，以提高燃油效率并降低成本。为了实现这一目标，汽车黏合剂和密封剂被用来代替笨重的金属框架和连接部件，如焊接接头、螺丝和螺栓。预计这些技术发展将在 2022 年至 2028 年期间推动对汽车黏合剂和密封剂的需求。
• 2020年汽车黏合剂和密封剂收益和需求的急剧下降是由于COVID-19疫情的影响，导致整体经济放缓和价值链中断。 2020年，非洲乘用车销量从2019年的85万辆下降至65万辆。 2021年的復苏得益于政府推出的支持汽车产业的措施，因为汽车产业占非洲GDP的很大一部分。
• 市场规模由该地区的人均收入和人口决定。因此，从人口结构来看，全球超过75%的人口居住在撒哈拉以南非洲、北非和其他中东国家，而且该地区的汽车数量高于其他任何地区。汽车的数量与製造汽车所需的汽车黏合剂和密封剂成正比。
• 南非是该地区最大的汽车製造国，占全球汽车产量的0.58%，占有近五分之一的市场占有率。

中东和非洲汽车胶合剂和密封剂市场趋势

较低的利率和燃料成本将促进行业成长

• 乘用车在一个地区汽车市场的占有率是衡量该地区人均收入的一个指标。由于该地区的经济衰退，2017 年至 2019 年期间汽车产业收益下降。然而，2021年疫情过后，市场迎来了巨大的成长潜力。在中东和非洲，日本汽车製造商丰田是乘用车的最大畅销品牌，市场占有率为 10.2%。预计中东和非洲的汽车产业在 2022-2028 年预测期内将实现成长，但速度将适中。
• 阿联酋、伊朗、沙乌地阿拉伯、科威特、卡达和巴林等中东石油资源丰富的国家有望成为豪华汽车的生产中心。沙乌地阿拉伯是中东地区汽车销量最高的国家，2019年销量为7,257.2万辆。 2018年汽车进口量较2017年下降18.4%。
• 新冠疫情主要影响了非洲地区的汽车产业。作为该地区最大的市场拥有者，丰田的乘用车销量从 2019 年的 90 万辆下降到 2020 年的 62 万辆。这导致该地区整体汽车市场的收益下降。然而，中东地区政府采取的降低汽车利率和燃油价格等措施预计将在 2022-2028 年预测期内推动汽车产业的成长。

中东和非洲汽车胶合剂和密封剂产业概况

中东和非洲汽车黏合剂和密封剂市场适度整合，前五大公司占据47.51％的市场份额。市场的主要企业有：陶氏化学、富勒公司、汉高股份公司、亨斯迈国际有限责任公司和西卡股份公司。

其他福利

• Excel 格式的市场预测 (ME) 表
• 3个月的分析师支持

目录

第一章执行摘要和主要发现

第二章 报告要约

第三章 引言

• 研究假设和市场定义
• 研究范围
• 调查方法

第四章 产业主要趋势

• 最终用户趋势
  • 车
• 法律规范
  • 沙乌地阿拉伯
  • 南非
• 价值炼和通路分析

第五章市场区隔

• 树脂
  • 丙烯酸纤维
  • 氰基丙烯酸酯
  • 环氧树脂
  • 聚氨酯
  • 硅胶
  • VAE・EVA
  • 其他的
• 科技
  • 热熔胶
  • 反应性
  • 密封剂
  • 溶剂型
  • 紫外线固化胶合剂
  • 水性
• 国家
  • 沙乌地阿拉伯
  • 南非
  • 其他中东和非洲地区

第六章竞争格局

• 关键策略趋势
• 市场占有率分析
• 商业状况
• 公司简介
  • 3M
  • Arkema Group
  • AVERY DENNISON CORPORATION
  • DELO Industrie Klebstoffe GmbH & Co. KGaA
  • Dow
  • HB Fuller Company
  • Henkel AG & Co. KGaA
  • Huntsman International LLC
  • PPG Industries, Inc.
  • Sika AG

第七章：CEO面临的关键策略问题

第 8 章 附录

• 全球黏合剂和密封剂产业概况
  • 概述
  • 五力分析框架（产业吸引力分析）
  • 全球价值链分析
  • 驱动因素、限制因素和机会
• 资讯来源及延伸阅读
• 图片列表
• 关键见解
• 数据包
• 词彙表

The Middle East & Africa Automotive Adhesives & Sealants Market size is estimated at 276.02 million USD in 2024, and is expected to reach 359.52 million USD by 2028, growing at a CAGR of 6.83% during the forecast period (2024-2028).

Introduction and demand for electric vehicles in the region to create upswings for market growth

• The growth in the Middle East & African automotive industry has led to the growth of demand for automotive adhesives and sealants. There was an increase in automobile production in major countries of Africa, such as South Africa, which accounted for 0.58% of global vehicle production in 2020 and is expected to grow significantly because of the introduction and demand for electric vehicles in the forecast period 2022-2028. This trend is expected to boost the demand for adhesives and sealants required for automobile manufacture over the forecast period 2022-2028.
• The COVID-19 pandemic in 2020 severely affected the automotive industry in the Middle East and Africa because of economic slowdowns and value chain disruptions. However, government support in the form of policies such as a 15% reduction in import duties in Saudi Arabia and lower fuel prices in Middle East countries led to a rapid recovery in demand for automobiles, which increased the demand for automotive adhesives and sealants in 2021.
• The majorly used resins in the automotive industry are epoxy-based, polyurethane-based, and acrylic-based because of their wide compatibility with different substrates such as ceramics, plastics, glass, metals, and composites, which comprise the overall structure of an automobile. Polyurethane resin is used as polyurethane reactive (PUR) adhesives in manufacturing automobiles.
• VAE/EVA adhesives are the fastest-growing technology in the Middle East & African automotive industry. It is expected that these adhesives will register a CAGR of 8.24% during the forecast period (2022-2028) due to the rising trend of hot-melt adhesives over solvent-borne adhesives.

Technological developments in automotive industry to replace bulky metallic frames to aid market growth

• The major automotive companies in the Middle East & Africa, such as Hyundai, are working on making the vehicles light in weight so as to improve fuel efficiency and as cost-cutting measures. To achieve this, automotive adhesives and sealants are used to replace bulkier metallic frames and joinery components such as welding joints, screws, and bolts. This technology development will lead to an increase in demand for automotive adhesives and sealants in mentioned period of 2022-2028.
• The abrupt reductions in revenue and demand for automotive adhesives and sealants in 2020 are due to the impact of the COVID-19 pandemic, which caused an overall economic slowdown and value chain disruptions. Passenger vehicle sales in Africa decreased from 850,000 vehicular units in 2019 to 650,000 vehicular units in 2020. This growth was recovered in 2021 because of government policies that were meant to support the automotive industry, as it covers the major portion of the GDP of a nation.
• The size of the market is determined by the per capita income and population of the region. So based on demographics, more than 75% is covered by countries in the sub-Sahara region, Northern Africa, and the rest of the Middle East countries, which is a larger number of vehicles in the region than that of the rest. The vehicle's count is directly proportional to the automotive adhesives and sealants required to manufacture the same.
• South Africa contains nearly one-fifth of the market share as it is the largest manufacturer of automobiles in the region, which comprise 0.58% of global automobile production.

Middle East & Africa Automotive Adhesives & Sealants Market Trends

Lower interest rates and fuel rates to aid the industry's growth

• The share of passenger vehicles in a regional automotive market is an indicator of the per capita income in the region. The revenue in the automotive industry declined from 2017 to 2019 owing to a recession in the region. However, post-pandemic, the market recorded tremendous growth potential in 2021. Japanese automobile manufacturer Toyota sold the maximum number of passenger vehicles in the Middle East & Africa, accounting for 10.2% of the market share. The Middle East & African automotive industry is expected to grow in the forecast period 2022-2028 but at a slower pace.
• The crude oil-rich countries in the Middle East, such as UAE, Iran, Saudi Arabia, Kuwait, Qatar, and Bahrain, are trying to become production hubs for luxury cars as currently, they are importing the majority of them from European and Asian automotive manufacturers at significantly higher costs. The sales of automobiles in the Middle East were the highest in Saudi Arabia, amounting to 72,572 thousand units of vehicles in 2019. Car imports dropped by 18.4% in 2018 compared to 2017.
• The COVID-19 pandemic impacted the automotive industry, majorly in the African region. Toyota, the largest market share holder in the region, registered a dip in sales of passenger vehicles from 900 thousand units in 2019 to 620 thousand units in 2020. This led to a decrease in the revenue of the whole automotive market in the region. However, government initiatives such as lower auto interest rates and cheaper fuel rates in the Middle East region are expected to lead to the growth of the automotive sector in the forecast period 2022-2028.

Middle East & Africa Automotive Adhesives & Sealants Industry Overview

The Middle East & Africa Automotive Adhesives & Sealants Market is moderately consolidated, with the top five companies occupying 47.51%. The major players in this market are Dow, H.B. Fuller Company, Henkel AG & Co. KGaA, Huntsman International LLC and Sika AG (sorted alphabetically).

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 EXECUTIVE SUMMARY & KEY FINDINGS

2 REPORT OFFERS

3 INTRODUCTION

• 3.1 Study Assumptions & Market Definition
• 3.2 Scope of the Study
• 3.3 Research Methodology

4 KEY INDUSTRY TRENDS

• 4.1 End User Trends
  • 4.1.1 Automotive
• 4.2 Regulatory Framework
  • 4.2.1 Saudi Arabia
  • 4.2.2 South Africa
• 4.3 Value Chain & Distribution Channel Analysis

5 MARKET SEGMENTATION (includes market size in Value in USD and Volume, Forecasts up to 2028 and analysis of growth prospects)

• 5.1 Resin
  • 5.1.1 Acrylic
  • 5.1.2 Cyanoacrylate
  • 5.1.3 Epoxy
  • 5.1.4 Polyurethane
  • 5.1.5 Silicone
  • 5.1.6 VAE/EVA
  • 5.1.7 Other Resins
• 5.2 Technology
  • 5.2.1 Hot Melt
  • 5.2.2 Reactive
  • 5.2.3 Sealants
  • 5.2.4 Solvent-borne
  • 5.2.5 UV Cured Adhesives
  • 5.2.6 Water-borne
• 5.3 Country
  • 5.3.1 Saudi Arabia
  • 5.3.2 South Africa
  • 5.3.3 Rest of Middle East & Africa

6 COMPETITIVE LANDSCAPE

• 6.1 Key Strategic Moves
• 6.2 Market Share Analysis
• 6.3 Company Landscape
• 6.4 Company Profiles (includes Global Level Overview, Market Level Overview, Core Business Segments, Financials, Headcount, Key Information, Market Rank, Market Share, Products and Services, and Analysis of Recent Developments).
  • 6.4.1 3M
  • 6.4.2 Arkema Group
  • 6.4.3 AVERY DENNISON CORPORATION
  • 6.4.4 DELO Industrie Klebstoffe GmbH & Co. KGaA
  • 6.4.5 Dow
  • 6.4.6 H.B. Fuller Company
  • 6.4.7 Henkel AG & Co. KGaA
  • 6.4.8 Huntsman International LLC
  • 6.4.9 PPG Industries, Inc.
  • 6.4.10 Sika AG

7 KEY STRATEGIC QUESTIONS FOR ADHESIVES AND SEALANTS CEOS

8 APPENDIX

• 8.1 Global Adhesives and Sealants Industry Overview
  • 8.1.1 Overview
  • 8.1.2 Porter's Five Forces Framework (Industry Attractiveness Analysis)
  • 8.1.3 Global Value Chain Analysis
  • 8.1.4 Drivers, Restraints, and Opportunities
• 8.2 Sources & References
• 8.3 List of Tables & Figures
• 8.4 Primary Insights
• 8.5 Data Pack
• 8.6 Glossary of Terms