印度工程塑胶市场：市场占有率分析、产业趋势与统计、成长预测（2024-2029）

印度工程塑胶市场规模预计在 2024 年为 43.6 亿美元，预计到 2029 年将达到 62.6 亿美元，预测期内（2024-2029 年）的复合年增长率为 7.49%。

预测期内包装产业将保持主导地位

• 工程塑胶的应用范围包括航太内墙板和门以及硬质和软质包装。印度工程塑胶市场受到包装、电气电子和汽车等行业的推动。 2022 年，包装和电气电子将占据最高的市场销售份额，分别为 27.58% 和 21.10%。
• 包装占印度工程塑胶市场的最大份额。由于新产品发布对塑胶包装的需求，印度包装产业在二线城市蓬勃发展。国内外公司正在采取合资、合作等策略，这对市场成长产生了正面影响。成长的主要动力还在于树脂的低成本和灵活性，而且树脂对环境的碳排放也很低。印度塑胶包装产量预计将从 2021 年的 400 万吨增加到 2022 年的 416 万吨，产量与前一年同期比较增 3.97%。
• 电气和电子产业是印度成长最快的产业，2021 年对该国 GDP 的贡献率为 3.4% 左右。印度政府已製定策略，透过针对智慧型手机、半导体、设计和 IT 软体硬体组件的四项 PLI（生产连结奖励计画）计划，推动电子产业发展，并在未来几年内将其价值提升至 170 亿美元。 2022年9月，印度电子产品出口额为20.0907亿美元，较去年同期成长71.99%。预计这些因素将推动电子产业工程塑胶的成长，预计预测期内以金额为准的复合年增长率将达到 9.42%。

印度工程塑胶市场趋势

政府监管支持在产业成长中发挥关键作用

• 在印度，2020-2021年电气和电子设备销售额成长了19.6%。电子製造业产值预计将从 2015-16 年的 371 亿美元增加到 2020-21 年的 673 亿美元。然而，新冠疫情相关的干扰影响了2020-2021年的成长轨迹，导致产出下降。
• 2022年9月，印度电子产品出口额为20.0907亿美元，与前一年同期比较去年同期成长71.99%。行动电话、IT硬体（笔记型电脑、平板电脑）、家用电子电器（电视、音响）、工业电子产品和汽车电子产品是该领域的主要出口产品。印度电子与资讯科技部预计，到2026年，印度电子产品出口额将达1,200亿美元。美国是印度电子产品出口的最大进口国，其次是阿联酋，分别占印度电子产品出口总额的18%和17%。印度行动电话出口在南亚、非洲和中东地区拥有庞大市场，这些地区是手机产品的主要进口地区。
• 为了满足日益增长的电子产品需求，政府推出了生产挂钩激励计划（PLI）、电子元件和半导体製造计划（SPECS）以及改进电子製造群（EMC 2.0）等倡议，以促进该国电子产业的发展。印度电子产业规模预计将从 2020-21 年的 750 亿美元增至 2025-26 年的 3,000 亿美元。由于市场发展和印度业务流程外包（BPO）行业份额的不断增长，印度电子行业有潜力在未来三到五年内成为印度最大的出口行业之一。

印度工程塑胶产业概况

印度工程塑胶市场相当集中，前五大公司占据85.39%的市场。该市场的主要企业有 Chiripal Poly Film、INEOS、IVL Dhunseri Petrochem Industries Private Limited (IDPIPL)、JBF Industries Ltd、Reliance Industries Limited 等。

其他福利

• Excel 格式的市场预测 (ME) 表
• 3个月的分析师支持

目录

第一章执行摘要和主要发现

第二章 报告要约

第三章 引言

• 研究假设和市场定义
• 研究范围
• 调查方法

第四章 产业主要趋势

• 最终用户趋势
  • 航太
  • 车
  • 建筑与施工
  • 电气和电子
  • 包装
• 进出口趋势
• 价格趋势
• 回收概述
  • 聚酰胺（PA）回收趋势
  • 聚碳酸酯（PC）回收趋势
  • 聚对苯二甲酸乙二醇酯（PET）的回收趋势
  • 苯乙烯共聚物（ABS、SAN）的回收趋势
• 法律规范
  • 印度
• 价值炼和通路分析

第五章市场区隔

• 最终用户产业
  • 航太
  • 车
  • 建筑与施工
  • 电气和电子
  • 工业/机械
  • 包装
  • 其他的
• 树脂类型
  • 氟树脂
    • 依亚型
    • 乙烯-四氟乙烯（ETFE）
    • 氟化乙丙烯 (FEP)
    • 聚四氟乙烯（PTFE）
    • 聚氟乙烯（PVF）
    • 聚二氟亚乙烯（PVDF）
    • 其他子树脂类型
  • 液晶聚合物（LCP）
  • 聚酰胺（PA）
    • 依树脂类型分
    • 芳香聚酰胺
    • 聚酰胺（PA）6
    • 聚酰胺（PA）66
    • 聚邻苯二甲酰胺
  • 聚丁烯对苯二甲酸酯（PBT）
  • 聚碳酸酯（PC）
  • 聚醚醚酮（PEEK）
  • 聚对苯二甲酸乙二醇酯（PET）
  • 聚酰亚胺（PI）
  • 聚甲基丙烯酸甲酯（PMMA）
  • 聚甲醛（POM）
  • 苯乙烯共聚物（ABS和SAN）

第六章竞争格局

• 关键策略趋势
• 市场占有率分析
• 商业状况
• 公司简介
  • Bhansali Engineering Polymers Limited
  • Chiripal Poly Film
  • DuPont
  • Ester Industries Limited
  • Gujarat Fluorochemicals Limited（GFL）
  • Gujarat State Fertilizers & Chemicals Limited（GSFC）
  • Hindustan Fluorocarbons Limited.
  • INEOS
  • IVL Dhunseri Petrochem Industries Private Limited（IDPIPL）
  • JBF Industries Ltd
  • LANXESS
  • Mitsubishi Chemical Corporation
  • Polyplex
  • Reliance Industries Limited
  • Solvay

第七章：CEO面临的关键策略问题

第 8 章 附录

• 世界概况
  • 概述
  • 五力分析框架（产业吸引力分析）
  • 全球价值链分析
  • 市场动态（DRO）
• 资讯来源及延伸阅读
• 图片列表
• 关键见解
• 数据包
• 词彙表

The India Engineering Plastics Market size is estimated at 4.36 billion USD in 2024, and is expected to reach 6.26 billion USD by 2029, growing at a CAGR of 7.49% during the forecast period (2024-2029).

Packaging industry to remain dominant during the forecast period

• Engineering plastics have applications ranging from interior wall panels and doors in aerospace to rigid and flexible packaging. The engineering plastics market in India is led by industries such as packaging, electrical and electronics, and automotive. Packaging and electrical and electronics accounted for the highest market revenue shares of 27.58% and 21.10%, respectively, in 2022.
• Packaging holds the largest share of India's engineering plastics market. The packaging industry in India is flourishing in second-tier cities due to the demand for plastic packaging in launching new products. Domestic and foreign firms are adopting strategies such as joint ventures and partnerships that positively impact market growth. The growth is also primarily driven by the low cost and flexibility of the resins, which also maintain a low-carbon footprint on the environment. India's plastic packaging production had a volume of 4.16 million tons in 2022 from 4 million tons in 2021, at a Y-o-Y growth of 3.97% by volume.
• The electrical and electronics industry is India's most rapidly expanding sector, with the electronics segment contributing approximately 3.4% to the country's GDP in 2021. The government has outlined a strategy to promote the electronics industry and increase its value to USD 17 billion through four PLI (production-linked incentive) schemes for smartphones, semiconductors, design, and IT software and hardware components over the next few years. India's export of electronic goods stood at USD 2,009.07 million in September 2022, with an increase of 71.99% Y-o-Y. These factors are expected to impetus the growth of engineering plastics in the electronics industry, registering a CAGR of 9.42%, by value, over the forecast period in India.

India Engineering Plastics Market Trends

Regulatory support by the government to play key role in industry growth

• India witnessed an increase in electrical and electronics revenue by 19.6% from 2020 to 2021. The electronics manufacturing industry's production grew from a value of USD 37.1 billion in 2015-16 to USD 67.3 billion in 2020-21. However, COVID-19-related disruptions impacted the growth trajectory in 2020-21 and led to a decline in output.
• India's export of electronic goods stood at USD 2,009.07 million in September 2022, an increase of 71.99% Y-o-Y. Mobile phones, IT hardware (laptops, tablets), consumer electronics (TV and audio), industrial electronics, and auto electronics are key export products in this sector. The Ministry of Electronics & IT estimates that India's electronics industry exports are expected to reach a value of USD 120 billion by 2026. The United States is the largest importer of India's electronic exports, followed by the United Arab Emirates, accounting for 18% and 17% of the overall exports, respectively. Mobile phone exports from India find significant markets in South Asia, Africa, and the Middle East, making them key importing regions for these products.
• With the growing need for electronic goods, the government launched production-linked incentives (PLI), Manufacturing of Electronic Components and Semiconductors (SPECS), Modified Electronic Manufacturing Clusters (EMC 2.0), etc., to promote the country's electronic goods industry. The country's electronics industry is expected to reach a value of USD 300 billion by 2025-26 from USD 75 billion in 2020-21. India's electronics sector has the potential to become one of the top exporting sectors of India in the next 3-5 years due to the development and increase in the market share of the Indian business process outsourcing (BPO) industry.

India Engineering Plastics Industry Overview

The India Engineering Plastics Market is fairly consolidated, with the top five companies occupying 85.39%. The major players in this market are Chiripal Poly Film, INEOS, IVL Dhunseri Petrochem Industries Private Limited (IDPIPL), JBF Industries Ltd and Reliance Industries Limited (sorted alphabetically).

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 EXECUTIVE SUMMARY & KEY FINDINGS

2 REPORT OFFERS

3 INTRODUCTION

• 3.1 Study Assumptions & Market Definition
• 3.2 Scope of the Study
• 3.3 Research Methodology

4 KEY INDUSTRY TRENDS

• 4.1 End User Trends
  • 4.1.1 Aerospace
  • 4.1.2 Automotive
  • 4.1.3 Building and Construction
  • 4.1.4 Electrical and Electronics
  • 4.1.5 Packaging
• 4.2 Import And Export Trends
• 4.3 Price Trends
• 4.4 Recycling Overview
  • 4.4.1 Polyamide (PA) Recycling Trends
  • 4.4.2 Polycarbonate (PC) Recycling Trends
  • 4.4.3 Polyethylene Terephthalate (PET) Recycling Trends
  • 4.4.4 Styrene Copolymers (ABS and SAN) Recycling Trends
• 4.5 Regulatory Framework
  • 4.5.1 India
• 4.6 Value Chain & Distribution Channel Analysis

5 MARKET SEGMENTATION (includes market size in Value in USD and Volume, Forecasts up to 2029 and analysis of growth prospects)

• 5.1 End User Industry
  • 5.1.1 Aerospace
  • 5.1.2 Automotive
  • 5.1.3 Building and Construction
  • 5.1.4 Electrical and Electronics
  • 5.1.5 Industrial and Machinery
  • 5.1.6 Packaging
  • 5.1.7 Other End-user Industries
• 5.2 Resin Type
  • 5.2.1 Fluoropolymer
    • 5.2.1.1 By Sub Resin Type
    • 5.2.1.1.1 Ethylenetetrafluoroethylene (ETFE)
    • 5.2.1.1.2 Fluorinated Ethylene-propylene (FEP)
    • 5.2.1.1.3 Polytetrafluoroethylene (PTFE)
    • 5.2.1.1.4 Polyvinylfluoride (PVF)
    • 5.2.1.1.5 Polyvinylidene Fluoride (PVDF)
    • 5.2.1.1.6 Other Sub Resin Types
  • 5.2.2 Liquid Crystal Polymer (LCP)
  • 5.2.3 Polyamide (PA)
    • 5.2.3.1 By Sub Resin Type
    • 5.2.3.1.1 Aramid
    • 5.2.3.1.2 Polyamide (PA) 6
    • 5.2.3.1.3 Polyamide (PA) 66
    • 5.2.3.1.4 Polyphthalamide
  • 5.2.4 Polybutylene Terephthalate (PBT)
  • 5.2.5 Polycarbonate (PC)
  • 5.2.6 Polyether Ether Ketone (PEEK)
  • 5.2.7 Polyethylene Terephthalate (PET)
  • 5.2.8 Polyimide (PI)
  • 5.2.9 Polymethyl Methacrylate (PMMA)
  • 5.2.10 Polyoxymethylene (POM)
  • 5.2.11 Styrene Copolymers (ABS and SAN)

6 COMPETITIVE LANDSCAPE

• 6.1 Key Strategic Moves
• 6.2 Market Share Analysis
• 6.3 Company Landscape
• 6.4 Company Profiles (includes Global Level Overview, Market Level Overview, Core Business Segments, Financials, Headcount, Key Information, Market Rank, Market Share, Products and Services, and Analysis of Recent Developments).
  • 6.4.1 Bhansali Engineering Polymers Limited
  • 6.4.2 Chiripal Poly Film
  • 6.4.3 DuPont
  • 6.4.4 Ester Industries Limited
  • 6.4.5 Gujarat Fluorochemicals Limited (GFL)
  • 6.4.6 Gujarat State Fertilizers & Chemicals Limited (GSFC)
  • 6.4.7 Hindustan Fluorocarbons Limited.
  • 6.4.8 INEOS
  • 6.4.9 IVL Dhunseri Petrochem Industries Private Limited (IDPIPL)
  • 6.4.10 JBF Industries Ltd
  • 6.4.11 LANXESS
  • 6.4.12 Mitsubishi Chemical Corporation
  • 6.4.13 Polyplex
  • 6.4.14 Reliance Industries Limited
  • 6.4.15 Solvay

7 KEY STRATEGIC QUESTIONS FOR ENGINEERING PLASTICS CEOS

8 APPENDIX

• 8.1 Global Overview
  • 8.1.1 Overview
  • 8.1.2 Porter's Five Forces Framework (Industry Attractiveness Analysis)
  • 8.1.3 Global Value Chain Analysis
  • 8.1.4 Market Dynamics (DROs)
• 8.2 Sources & References
• 8.3 List of Tables & Figures
• 8.4 Primary Insights
• 8.5 Data Pack
• 8.6 Glossary of Terms