欧洲建筑幕墙：市场占有率分析、产业趋势与统计、成长预测（2026-2031）

2025年欧洲建筑幕墙市场价值为622亿美元，预计2031年将达到807.3亿美元，高于2026年的649.6亿美元。

预计在预测期（2026-2031 年）内，复合年增长率将达到 4.44%。

受格伦费尔大厦火灾后的相关法规以及欧盟「Fit-for-55」能源目标（该目标强制要求对建筑外围护结构维修）的推动，维修和改造需求占据主导地位。虽然商业客户仍占支出的大部分，但随着超大规模资料中心丛集和模组化异地建造重塑住宅供应链，住宅的活动也在加速成长。竞争格局不再以规模取胜，而是以技术差异化为特征，建筑幕墙专家们正在整合低碳铝材、建筑一体化光伏（BIPV）和人工智慧自适应面板，以满足商业碳排放上限的要求。儘管材料成本波动和安装人员短缺限制了短期发展势头，但持续的政策压力使欧洲主要经济体的订单量保持强劲。

欧洲建筑幕墙市场趋势与洞察

格伦费尔大火后，欧盟高层建筑进行外观维修。

2017年的悲剧发生后，消防安全法规收紧，强制要求18公尺以上建筑物的业主更换易燃系统。保险公司停止承保现有覆材覆层，使合规成为强制性要求。 2024年瓦伦西亚公寓火灾后，德国效仿英国的做法，法国则透过更新《建筑产品法规》加强了建筑幕墙测试。强制更换外墙覆层保护了欧洲建筑幕墙市场免受建设业整体衰退的影响，并确保了维修订单的稳定成长，因为法律责任比成本考量更为重要。

2050 年净零建筑法规“适合 55 岁及以上人群”

《建筑能源性能指令》要求新建筑在2030年前实现零排放，现有建筑在2050年前进行大规模维修。法国的RE2020将二氧化碳当量排放量上限设定为每平方公尺640公斤，并已开始强制进行产品重新设计。一波维修旨在升级3,500万栋建筑，其中建筑幕墙约占潜在节能的35%。德国最新的建筑规范强制要求采用无热桥连接，并提出了日益复杂的技术规范，尤其强调先进的帷幕墙和通风墙技术。

铝和浮法玻璃价格波动

2024年，铝价预计为每吨2300至2600美元，浮法玻璃价格上涨了10%至15%。特种超大面板的交货期已延长至20週，严重扰乱了计划进度。承包商在合约中加入价格上涨条款，将成本风险转移给业主，这可能导致核准延迟并压缩利润空间。

细分市场分析

预计到2025年，通风式解决方案将占总收入的50.35%，复合年增长率达4.78%。这主要归功于空气层的形成，可降低高达25%的冷却负荷。这一主导市场份额表明，性能与法规合规性在欧洲建筑幕墙市场中已充分整合。随着监管机构收紧热桥法规，采用自然通风和排湿排放的通风组件克服了困扰实心覆层层的冷凝风险。与固体建筑一体化（BIPV）组件的兼容性提升了其吸引力，使安装人员能够散发光伏热量并保护电池效率。非通风式面板在结构改造受限的历史建筑维修中仍然有用，但其成长率低于欧洲建筑幕墙市场的平均水平。

这种先进的设计融合了智慧百叶窗、动态遮阳系统和感测器控制的气流风门。工厂预製的通风盒符合异地趋势，提高了品质保证并缩短了现场施工流程。消防法规也支持这种结构，因为模腔可以起到隔热缓衝作用，减缓火焰蔓延——在格伦费尔大火之后，这一特性尤其重要。总而言之，这种配置巩固了通风解决方案作为办公大楼、学校和高层住宅达到欧盟近零能耗建筑（nZEB）标准的最佳选择的地位。

2025年，帷幕墙组装占市场份额的44.60%，但雨幕墙正在迎头赶上，预计到2031年将以4.83%的复合年增长率增长，因为越来越多的建筑师在维修工程中指定使用多功能幕墙。欧洲雨幕墙市场正在成长，这得益于材料的灵活性，从陶瓷砖到支持苔藓生长的生物响应混凝土，后者有助于促进城市生物多样性。幕墙对于需要全景玻璃、气密性和抗震性能的天际线计划仍然至关重要。

市场创新包括电致变色玻璃、整合式光伏发电系统以及可现场安装的模组化系统，这些系统可作为楼层高的面板使用。 ISO 12631 和 EN 13830 标准主导製造商提升隔热和隔音性能。因此，雨幕系统供应商正在尝试使用模组化副框架和可回收支架，力求将该领域定位为永续性的基础，而不仅仅是降低成本的手段。

其他福利：

• Excel格式的市场预测（ME）表
• 3个月的分析师支持

目录

第一章 引言

• 研究假设和市场定义
• 调查范围

第二章调查方法

第三章执行摘要

第四章 市场情势

• 市场概览
• 市场驱动因素
  • 格伦费尔大厦火灾后，欧盟高层建筑外墙维修激增。
  • 2050 年净零建筑法规“适合 55 岁及以上人群”
  • 模组化异地建筑幕墙製造的普及
  • FLAP-D丛集超大规模资料中心建置热潮
  • 透过增值税减免和上网电价补贴（FIT）促进光伏建筑一体化建筑幕墙的普及
  • 透过碳边境调节机制（CBAM）实现低碳铝的国内回流
• 市场限制
  • 铝和浮法玻璃价格波动
  • 合格的建筑幕墙施工人员人手不足
  • 易燃系统的保险除外责任
  • 欧盟分类法和区域计画中的碳蕴藏量限额
• 欧洲建筑幕墙结构体系概述
• 定价分析
• 价值/供应链分析
• 监管环境
• 技术展望
• 波特五力模型
  • 供应商的议价能力
  • 消费者议价能力
  • 新进入者的威胁
  • 替代品的威胁
  • 竞争对手之间的竞争
• 消费行为分析（建筑师、建造商、开发商、业主）
• 永续发展趋势

第五章 市场规模与成长预测

• 按类型
  • 通风
  • 不通风的
  • 其他的
• 建筑幕墙系统类型
  • 防风雨外墙
  • 帷幕墙系统
  • 其他的
• 材料
  • 玻璃
  • 金属
  • 塑胶和纤维
  • 石头
  • 其他的
• 透过安装
  • 新建工程
  • 维修和改造工程
• 最终用户
  • 商业的
  • 住宅
  • 其他的
• 按地区
  • 德国
  • 英国
  • 法国
  • 义大利
  • 西班牙
  • 荷兰
  • 北欧国家（瑞典、丹麦、挪威、芬兰）
  • 其他欧洲地区

第六章 竞争情势

• 市场集中度
• 策略趋势
• 市占率分析
• 公司简介
  • Permasteelisa Group
  • Schuco International KG
  • Saint-Gobain SA
  • Lindner Group
  • Reynaers Aluminium NV
  • Kawneer（Arconic）Europe
  • AluK Group
  • Kingspan Group（Facade & Insulated Panels）
  • Hydro Building Systems（Technal, Wicona）
  • Yuanda Europe
  • STO SE & Co. KGaA
  • Etex Group-EOS Facades
  • Sapa Building Systems
  • Gartner（Permasteelisa）
  • Trimo doo
  • Glas Trosch Group
  • AGC Glass Europe
  • Focchi SpA
  • Josef Gartner GmbH
  • Alucraft Systems

第七章 市场机会与未来展望

The Europe facade market was valued at USD 62.2 billion in 2025 and estimated to grow from USD 64.96 billion in 2026 to reach USD 80.73 billion by 2031, at a CAGR of 4.44% during the forecast period (2026-2031).

Renovation and retrofit demand dominate because post-Grenfell regulations and EU "Fit-for-55" energy targets impose mandatory envelope upgrades. Commercial clients still account for most spending, yet residential activity is accelerating as hyperscale data-center clusters and modular off-site construction reshape housing supply chains. Technological differentiation rather than raw scale defines competition, with facade specialists integrating low-carbon aluminum, building-integrated photovoltaics (BIPV), and AI-enabled adaptive panels to satisfy embodied-carbon caps. Material cost swings and installer shortages temper near-term momentum, but sustained policy pressure keeps the order pipeline resilient across core European economies.

Europe Facade Market Trends and Insights

Post-Grenfell Recladding Surge Across EU High-Rise Stock

Heightened fire-safety scrutiny after the 2017 tragedy forces owners of buildings above 18 m to replace combustible systems. Insurers have removed coverage for legacy cladding, making compliance non-negotiable. Germany mirrored the UK's stance following the 2024 Valencia apartment blaze, and France upgraded facade testing under Construction Products Regulation updates. The compulsory nature of replacement shields the Europe facade market from macro construction downturns because legal liability overrides cost concerns, ensuring steady retrofit orders.

Net-Zero-2050 Envelope Mandates Under "Fit-for-55"

The Energy Performance of Buildings Directive calls for all new structures to reach zero-emission status by 2030 and for deep retrofits of existing stock by 2050. France's RE2020 sets a 640 kg CO2eq/m2 ceiling that is already forcing product redesign. The renovation wave aims to upgrade 35 million buildings, with facades responsible for roughly 35% of potential energy savings. Germany's latest building code now requires thermal-bridge-free connections, raising specification complexity and favoring sophisticated curtain-wall and ventilated concepts.

Aluminum and Float-Glass Price Volatility

Aluminum traded between USD 2,300-2,600 per ton during 2024, while float-glass quotes soared 10-15%. Specialized jumbo-pane lead times stretched to 20 weeks, disrupting project schedules. Contractors incorporate escalation clauses that transfer cost risk to owners, which can stall approvals and compress margins.

Other drivers and restraints analyzed in the detailed report include:

1. Modular Off-Site Facade Manufacturing Uptake
2. Hyperscale Data-Center Build Boom in FLAP-D Clusters
3. Certified Facade-Installer Labor Shortage

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Ventilated solutions captured 50.35% of 2025 revenue and will expand at a 4.78% CAGR because they create an air cavity that lowers cooling loads by up to 25%. This dominant share underlines how the Europe facade market integrates performance and compliance. As regulators tighten thermal-bridge rules, ventilated assemblies, with natural airflow and moisture outflow, overcome condensation risks that plague solid claddings. Their compatibility with BIPV modules strengthens appeal, letting installers dissipate photovoltaic heat and protect cell efficiency. Non-ventilated panels still serve heritage retrofits where structural intervention is limited, but growth lags the Europe facade market average.

Advanced designs now embed smart louvers, kinetic shading, and sensor-driven airflow dampers. Factory-built ventilated cassettes dovetail with off-site trends, boosting quality assurance and shortening site programs. Fire-safety codes further support this architecture because the cavity acts as a thermal buffer that limits flame spread, a coveted attribute after Grenfell. Collectively, the configuration cements ventilated solutions as the go-to choice for meeting EU nZEB criteria in offices, schools, and high-rise housing.

Curtain-wall assemblies owned 44.60% of 2025 value, yet rainscreen cladding outpaces them with a 4.83% CAGR through 2031 as architects specify versatile skins for retrofits. The Europe facade market size for rainscreens is growing on the back of material freedom that stretches from ceramic tiles to bio-receptive concrete that nurtures moss for urban biodiversity. Curtain-wall incumbents remain indispensable in skyline projects that demand panoramic glazing, airtightness, and seismic tolerance.

Market innovations include electrochromic glazing, integrated photovoltaics, and unitized systems that arrive on site as complete story-height panels. ISO 12631 and EN 13830 standards steer performance testing, pushing makers to refine thermal and acoustic metrics. Consequently, rainscreen vendors now experiment with modular sub-frames and recyclable brackets, positioning the category as a sustainability platform rather than value engineering fallback.

The Europe Facade Market Report is Segmented by Type (Ventilated, Non-Ventilated, Others), Facade System Type (Rainscreen Cladding, Curtain-Wall Systems, Others), Material (Glass, Metal, Plastic & Fibers, and More), Installation (New Construction, Renovation & Retrofit), End-User (Commercial, Residential, Others), and Geography (Germany, UK, France, and More). The Market Forecasts are Provided in Terms of Value (USD).

List of Companies Covered in this Report:

1. Permasteelisa Group
2. Schuco International KG
3. Saint-Gobain S.A.
4. Lindner Group
5. Reynaers Aluminium NV
6. Kawneer (Arconic) Europe
7. AluK Group
8. Kingspan Group (Facade & Insulated Panels)
9. Hydro Building Systems (Technal, Wicona)
10. Yuanda Europe
11. STO SE & Co. KGaA
12. Etex Group - EOS Facades
13. Sapa Building Systems
14. Gartner (Permasteelisa)
15. Trimo d.o.o.
16. Glas Trosch Group
17. AGC Glass Europe
18. Focchi SpA
19. Josef Gartner GmbH
20. Alucraft Systems

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 Introduction

• 1.1 Study Assumptions & Market Definition
• 1.2 Scope of the Study

2 Research Methodology

3 Executive Summary

4 Market Landscape

• 4.1 Market Overview
• 4.2 Market Drivers
  • 4.2.1 Post-Grenfell style recladding surge across EU high-rise stock
  • 4.2.2 Net-zero-2050 envelope mandates under "Fit-for-55"
  • 4.2.3 Modular off-site facade manufacturing uptake
  • 4.2.4 Hyperscale data-centre build boom in FLAP-D clusters
  • 4.2.5 VAT-relief & feed-in tariffs accelerating BIPV facades
  • 4.2.6 CBAM-driven reshoring of low-carbon aluminium
• 4.3 Market Restraints
  • 4.3.1 Aluminium & float-glass price volatility
  • 4.3.2 Certified facade-installer labor shortage
  • 4.3.3 Insurance exclusions for combustible systems
  • 4.3.4 Embodied-carbon caps in EU taxonomy & local plans
• 4.4 Brief on Structural Systems Used in European Facades
• 4.5 Pricing Analysis
• 4.6 Value / Supply-Chain Analysis
• 4.7 Regulatory Landscape
• 4.8 Technological Outlook
• 4.9 Porter's Five Forces
  • 4.9.1 Bargaining Power of Suppliers
  • 4.9.2 Bargaining Power of Consumers
  • 4.9.3 Threat of New Entrants
  • 4.9.4 Threat of Substitutes
  • 4.9.5 Intensity of Competitive Rivalry
• 4.10 Consumer Behaviour Analysis (Architects, Contractors, Developers, Owners)
• 4.11 Sustainability Trends

5 Market Size & Growth Forecasts (Value, € billion)

• 5.1 By Type
  • 5.1.1 Ventilated
  • 5.1.2 Non-Ventilated
  • 5.1.3 Others
• 5.2 By Facade System Type
  • 5.2.1 Rainscreen Cladding
  • 5.2.2 Curtain-Wall Systems
  • 5.2.3 Others
• 5.3 By Material
  • 5.3.1 Glass
  • 5.3.2 Metal
  • 5.3.3 Plastic & Fibres
  • 5.3.4 Stone
  • 5.3.5 Others
• 5.4 By Installation
  • 5.4.1 New Construction
  • 5.4.2 Renovation & Retrofit
• 5.5 By End-User
  • 5.5.1 Commercial
  • 5.5.2 Residential
  • 5.5.3 Others
• 5.6 By Region
  • 5.6.1 Germany
  • 5.6.2 United Kingdom
  • 5.6.3 France
  • 5.6.4 Italy
  • 5.6.5 Spain
  • 5.6.6 Netherlands
  • 5.6.7 Nordics (Sweden, Denmark, Norway, Finland)
  • 5.6.8 Rest of Europe

6 Competitive Landscape

• 6.1 Market Concentration
• 6.2 Strategic Moves
• 6.3 Market Share Analysis
• 6.4 Company Profiles (includes Global level Overview, Market level overview, Core Segments, Financials as available, Strategic Information, Market Rank/Share for key companies, Products & Services, Recent Developments)
  • 6.4.1 Permasteelisa Group
  • 6.4.2 Schuco International KG
  • 6.4.3 Saint-Gobain S.A.
  • 6.4.4 Lindner Group
  • 6.4.5 Reynaers Aluminium NV
  • 6.4.6 Kawneer (Arconic) Europe
  • 6.4.7 AluK Group
  • 6.4.8 Kingspan Group (Facade & Insulated Panels)
  • 6.4.9 Hydro Building Systems (Technal, Wicona)
  • 6.4.10 Yuanda Europe
  • 6.4.11 STO SE & Co. KGaA
  • 6.4.12 Etex Group - EOS Facades
  • 6.4.13 Sapa Building Systems
  • 6.4.14 Gartner (Permasteelisa)
  • 6.4.15 Trimo d.o.o.
  • 6.4.16 Glas Trosch Group
  • 6.4.17 AGC Glass Europe
  • 6.4.18 Focchi SpA
  • 6.4.19 Josef Gartner GmbH
  • 6.4.20 Alucraft Systems

7 Market Opportunities & Future Outlook

• 7.1 White-Space & Unmet-Need Assessment