市场调查报告书
商品编码
1403416
到 2030 年雷射消熔表面清洁设备市场预测:按产品类型、应用、最终用户和地区分類的全球分析Laser Ablation Surface Cleaning Equipment Market Forecasts to 2030 - Global Analysis By Product Type (Pulsed Laser Ablation, Dry Laser Ablation, Wet Laser Ablation, Fiber Laser Cleaning and Other Product Types), Application, End User and By Geography |
根据 Stratistics MRC 的数据,预测期内雷射消熔表面清洁设备的全球市场将以 15.6% 的复合年增长率成长。
使用雷射去除杂质、残留物和不需要的材料的表面清洁设备被称为雷射消熔表面清洁设备。高强度雷射光束聚焦在表面上,以去除、溶解或蒸发不需要的材料,而不会损坏下面的材料。透过将雷射光束聚焦在表面上,杂质可以与雷射光束相互作用并发生分解或蒸发。
根据 IEA 的数据,到 2022 年,全球将有约 2,590 万辆电动车运作。同年纯电动车约占插电式电动车的69.5%。
清洗技术的精度和有效性对于电子、航太、汽车和医疗保健等行业至关重要。雷射消熔可去除杂质,从而提供高精度,且不会危及精緻的表面。雷射消熔可以精确去除杂质、氧化物、涂层或不需要的材料,而不会损坏下面的基板。它是非接触式的,可以保护敏感表面。
直接暴露于雷射光束会导致皮肤烧烫伤和严重的眼睛受伤。护目镜和手套只是操作员及其附近人员所需的一些适当的安全设备。一些雷射消熔的材料会释放出有害颗粒和蒸气,对呼吸系统健康构成威胁。有效的过滤和通风系统对于减少这些危害至关重要。
随着公司走向自动化和工业 4.0,对自动清洗程序的需求不断增加。结合雷射消熔设备可以提高自动化生产线的生产率和效率。由于自动化技术的进步,自动化生产线可以采用雷射清洗设备。这种连接确保了清洗操作的一致性和效率,简化了清洗过程并减少了体力劳动。
雷射消熔设备的购买和维护费用昂贵。购买设备需要大量的前期投资。它们还需要操作、定期维护和维修方面的专业知识,这会增加整体成本。使用雷射消熔设备需要一定的知识和经验。这种复杂性可能会导致培训成本增加和合格人员的缺乏,进而影响营运效率。
与许多其他企业一样,封锁、旅行限制和製造设施的关闭扰乱了雷射消熔设备生产和分销的供应链。结果,难以满足需求,导致零件短缺和製造延误。大流行所做的采购决定可能受到经济不确定性的影响,这可能影响了雷射消熔表面清洁设备的需求和投资。
预计脉衝雷射消熔细分市场在预测期内将是最大的。脉衝雷射可以瞄准精确区域,同时使邻近区域不受影响。由于其精度,可以有针对性地去除杂质和层,而不会危及下面的表面。雷射脉衝的强度、长度和频率都可以由操作员调整,使他们可以自由地根据要清洗的特定材料和污染物定制清洗程序。
预计汽车业在预测期内复合年增长率最高。自动化生产线采用雷射清洗技术,提高清洗均匀度与生产率。即使是配备所有原厂零件且外装状况良好的贵重汽车也可以透过雷射清洗来修復。有轻微锈迹的好车很难买到,尤其是随着车龄的增长。
预计北美在预测期内将占据最大的市场占有率。坚固且可扩展的连接无需经过涂层工艺即可完全涂层,这是雷射清洗机的要求的结果,可保证最佳的焊接前和焊接后后处理。此外,生产技术正在不断发展以生产高品质的产品,雷射科学正在加强和系统化,越来越多的雷射研究人员和工程师正在努力正确使用雷射。
预计亚太地区在预测期内将维持最高的复合年增长率。这是由于越来越多地采用雷射技术进行表面清洁,特别是在航太、航空航太、电子和医疗保健等行业。此外,政府促进製造活动和研发投资的措施正在进一步推动该地区的雷射消熔表面清洁设备市场。
According to Stratistics MRC, the Global Laser Ablation Surface Cleaning Equipment Market is growing at a CAGR of 15.6% during the forecast period. Surface cleaning equipment that uses lasers to remove impurities, residues, or undesired materials is known as laser ablation surface cleaning equipment. In order to eliminate, dissolve, or evaporate the undesirable materials without harming the underlying material, high-intensity laser beams are focused at the surface. By concentrating the laser beam on the surface, the impurities are able to interact with it and undergo breakdown or vaporization.
According to IEA, roughly 25.9 million electric vehicles were operating worldwide in 2022. All-electric cars accounted for about 69.5% of plug-in electric vehicles that year.
Precision and effectiveness in cleaning techniques are essential in industries including electronics, aerospace, automotive, and healthcare. High accuracy is provided by laser ablation, which eliminates impurities without endangering delicate surfaces. They make it possible to remove impurities, oxides, coatings, or undesirable material precisely without causing harm to the substrate underneath. Its non-contact nature shields fragile surfaces from harm
Burns to the skin or serious eye injury can result from direct laser beam exposure. Goggles and gloves are only a couple of the appropriate safety equipment that operators and those nearby need. Certain materials that undergo laser ablation may release harmful particles or vapors that might endanger respiratory health. To reduce these dangers, effective filtration and ventilation systems are essential.
Automatic cleaning procedures are becoming more and more in demand as companies transition to automation and Industry 4.0. The productivity and efficiency of automated production lines can be increased by integrating laser ablation devices. Automated manufacturing lines can incorporate laser cleaning equipment because to technological advancements in automation. This connection guarantees consistency and efficiency in cleaning duties while streamlining the cleaning process and lowering manual labor.
Equipment for laser ablation is costly to buy and maintain. Buying the equipment requires a large upfront expenditure. In addition, the cost of specialist knowledge for operation, regular maintenance, and repairs might raise the entire costs. Utilizing laser ablation equipment necessitates certain knowledge and experience. This complexity lead to higher training costs and a limited pool of qualified personnel, which could affect operational efficiency.
Lockdowns, travel restrictions, and manufacturing facility closures caused interruptions to the supply chain for the production and distribution of laser ablation equipment, as they do in many other businesses. This resulted in difficulties satisfying demand, shortages of components, and manufacturing delays. Purchase decisions made during the pandemic may have been impacted by economic uncertainty, which might have had an impact on demand and investment in laser ablation surface cleaning equipment.
The pulsed laser ablation segment is expected to be the largest during the forecast period. Pulsed lasers are able to target exact regions while leaving neighboring areas unaffected. Because of its accuracy, impurities or layers may be removed in a targeted manner without endangering the surface underneath. The laser pulses' strength, length, and frequency may all be adjusted by operators, giving them the freedom to tailor the cleaning procedure to the specific material and pollutants being cleaned.
The automotive segment is expected to have the highest CAGR during the forecast period. Automated production lines use laser cleaning technologies to improve cleaning uniformity and productivity. A valuable car with all of its original parts and good external condition may be restored with laser cleaning. Excellent vehicles with light rust are hard to come by, especially as they get older.
North America is projected to hold the largest market share during the forecast period. A robust and expanding connection that may be adequately coated without undergoing any coating processes is the outcome of laser cleaning machines' requirement to guarantee the best prewelding and postwelding treatment. In addition, production technology for producing high-quality products, laser science for enhancement and systematization, and a growth in the number of laser researchers and engineers are all being developed in order to properly use lasers.
Asia Pacific is projected to hold the highest CAGR over the forecast period. The escalating adoption of laser technology for surface cleaning purposes, particularly in industries like automotive, aerospace, electronics, and healthcare, has been a major contributing factor. Moreover, government initiatives promoting manufacturing activities, coupled with investments in research and development, have further propelled the market for laser ablation surface cleaning equipment in the region.
Some of the key players in Laser Ablation Surface Cleaning Equipment market include Coherent, Clean LASER, Laser Photonics Corp., AdlOptica, IPG Photonics, Clean Lasersysteme, Quantel Laser, Trumpf, P-Laser, Farley Laserlab, Worldtek, Shengtong Intelligent, Bowei Laser, Xihao Laser and Shenzhen Hydrolaser Technology.
In April 2022, Laser Photonics Corp., a provider of high-tech laser systems for laser cleaning, announced the upgrades to the existing product line. Advancements are being made to the entire product line, which includes everything from Class IV to Class I laser blaster cabinets, automatic laser cleaning equipment, and robotic applications. Also, in May 2022, Laser Photonics Corp. announced the launch of the CleanTech3000-CTH laser cleaning system (3KW).
In March 2022, IPG Photonics constantly upgraded its laser cleaning portfolio; the company launched LightWELDXR, the third product offering within its handheld laser welding and cleaning product line. The new product provides an extended range of handheld laser welding and cleaning capabilities to address more materials and thicknesses than previous LightWELDmodels.