全球浮油撇油器市场规模（按产品、应用、地区、范围和预测）

浮动式撇油器的市场规模及预测

过去几年，浮动油撇取器市场规模一直以中等速度增长，增长率相当高，预计在预测期内（即 2024-2031 年）将出现显着增长。

防止溢油和减少石油污染事故的法规正在推动浮动油撇取器市场的发展。浮动油撇取器在废水池、冷却剂和切削液、钢厂等各种应用中的使用增加了此类撇取器的市场需求。本研究报告对全球浮动油撇取器市场进行了全面的评估。它对关键细分市场、趋势、市场推动因素、竞争格局以及在市场中发挥关键作用的因素进行了全面的分析。

浮油撇取器的全球市场定义

从液体中清除漂浮油脂的机器称为撇油器。皮带、管子、绳子、拖把或圆盘等撇油介质可以吸附在浮油上。然后将介质送到机器中进行擦拭。使用泵浦回收浮油的撇油器称为堰式撇油器。漂浮的油脂比亲和力较低的水更容易黏附在撇渣介质上。这样可以使带状、盘状、鼓状或其他形状的撇油介质通过流体表面，并在几乎不用水的情况下拾取漂浮的油脂。刮水片或压轮用于清除介质中的油性物质。撇油器提供了一种简单、可靠且有效的方法来去除水和冷却剂中的油、油脂和其他碳氢化合物。撇油器通常可以自行达到足够的水纯度。撇油是一种经济有效的方法，可以在使用更复杂、更昂贵的处理方法（如聚结器、薄膜过滤器和化学过程）之前去除大部分油。

撇去油脂使用黏度较高的碳氢化合物。撇油器上应安装加热器，使油脂液体保持足够的温度以便排出。撇油器非常适合用于废水池、冷却液和切削液、热处理、零件清洗机、食品加工厂、钢厂/鳞坑、停车场、车库和服务设施、室外池塘、湖泊、盆地等，回收/监测井，它具有多种工业用途，包括水力压裂（压裂）。

浮油撇取器全球市场概况

防止溢油和减少石油污染事故的法规正在推动浮动油撇取器市场的发展。浮动油撇取器在废水池、冷却剂和切削液、钢厂等各种应用中的使用增加了此类撇取器的市场需求。废油收集在大多数製造和加工设施的水系统的中央罐或集水坑中。撇除含水量低的浮油可减少处理成本以及与废水排放相关的潜在责任。当杂油污染了机器的冷却液时，通常会发生四种情况：冷却液的寿命缩短，加工零件的品质下降。很多时候，商店里会充满烟雾，让人感到烦躁。能够除去未形成油类的撇油器可以解决这些问题，并且可以在几个月内收回成本。在大多数钢铁厂中，油脂和重油都会积聚在水垢坑中。钢厂必须限制排放到环境中的废水中的油脂含量，以避免政府罚款和昂贵的沙床过滤。透过重新使用回收的油脂或将其用作熔炉燃料，可以避免抽吸卡车的处理成本。

然而，带式撇油器需要维护，这对浮动撇油器市场来说是一个限制。只有保养良好的皮带撇油器才能除去油污。为了保持皮带撇油器正常运转，使用者必须定期执行某些基本的维护任务。

目录

第 1 章。

市场概况
• 研究范围
• 先决条件

第 2 章执行摘要

第 3 章：经过验证的市场研究方法

• 资料探勘
• 验证
• 第一次面试
• 资料来源列表

第 4 章 浮油撇油器全球市场展望

• 概述
• 市场动态
  • 驱动程式
  • 阻碍因素
  • 机会
• 波特五力模型
• 价值链分析

5. 全球浮油撇油器市场（依产品划分）

• 概述
• 带式撇油器
• 碟式撇油器
• 其他

6. 全球浮油撇油器市场（依应用）

• 概述
• 排空集水坑
• 冷却液和切削液
• 炼钢厂
• 其他

7. 全球浮油撇油器市场（按地区）

• 概述
• 北美洲
  • 美国
  • 加拿大
  • 墨西哥
• 欧洲
  • 德国
  • 英国
  • 法国
  • 其他欧洲国家
  亚太地区
  • 中国
  • 日本
  • 印度
  • 其他亚太地区
• 世界其他地区
  • 拉丁美洲
  • 中东和非洲

第 8 章。

• 概述
• 各公司的市场排名
• 主要发展策略

第九章 公司简介

• Abanaki Corporation
• Elastec
• SkimOIL, Inc
• Wayne Products
• Zebra Skimmers
• Friess GmbH
• Megator
• KEM Co., Ltd.

第 10 章相关报告

Floating Oil Skimmers Market Size And Forecast

Floating Oil Skimmers Market size is growing at a moderate pace with substantial growth rates over the last few years and is estimated that the market will grow significantly in the forecasted period i.e. 2024 to 2031.

The regulations for spill prevention and reducing oil pollution incidents have boosted the Floating Oil Skimmers market. The use of floating oil skimmers in a variety of applications such as in Wastewater Sumps, Coolants and Cutting Fluids, Steel Mills, and Others has increased market demand for such skimmers. The Global Floating Oil Skimmers Market report provides a holistic evaluation of the market. The report offers a comprehensive analysis of key segments, trends, drivers, restraints, competitive landscape, and factors that are playing a substantial role in the market.

Global Floating Oil Skimmers Market Definition

A machine that removes floating oil and grease from the liquid is known as an oil skimmer. Skimming media such as a belt, tube, rope, mop, or disc adhere to the floating oil. The media is then delivered to the machine to be wiped. Skimmers that use a pump to collect floating oils are known as weir skimmers. Floating oil and grease cling to a skimming medium more readily than water, which has little affinity for the media. This allows skimming media in the form of a belt, disc, drum, or another shape to pass through a fluid surface and pick up floating oil and grease while using very little water. Wiper blades or pinch rollers are used to remove the oily material from the media. Oil skimmers remove oil, grease, and other hydrocarbons from water and coolants in a simple, dependable, and effective manner. An oil skimmer can often reach the appropriate degree of water purity by itself. Oil skimming is a cost-effective way to remove the bulk of the oil before utilizing more complicated and expensive treatments such as coalescers, membrane filters, and chemical processes in more demanding situations.

Higher viscosity hydrocarbons are used in grease skimming. Heaters must be installed in oil skimmers to keep grease fluid heated enough to discharge. Oil skimmers have various industrial applications such as in wastewater sumps, coolants and cutting fluids, heat treating, parts washers, food processing facilities, steel mills/scale pits, parking lots, garages and service facilities, outdoor ponds, lakes, basins, etc., recovery/monitoring wells, hydraulic fracturing (fracking) and other.

What's inside a VMR industry report?

Our reports include actionable data and forward-looking analysis that help you craft pitches, create business plans, build presentations and write proposals.

Global Floating Oil Skimmers Market Overview

The regulations for spill prevention and to reduce the oil pollution incidents have boosted the Floating Oil Skimmers market. The use of floating oil skimmers in a variety of applications such as into Wastewater Sumps, Coolants and Cutting Fluids, Steel Mills, and Others has increased market demand for such skimmers. Waste oil collects in a central tank or sump in most manufacturing or processing facilities' water systems. Skimming the floating oils with low water content can lower the cost of disposal and the potential liabilities associated with wastewater discharge. When tramp oils contaminate machine coolants, four things normally happen: The life of the coolant is reduced, The quality of machined parts has decreased. In many circumstances, a cloud of smoke may appear in the shop, causing irritation to the person; and the fluid has a rotten egg odor to it. Oil skimmers that remove tramp oils solve these issues and pay for themselves in a matter of a few months. Grease and heavy oils accumulate in scale pits in most steel mills. Steel mills must limit the amount of grease in wastewater discharged into the environment to avoid government fines and expensive sand bed filters. Sucker truck disposal costs can be avoided by reusing or using reclaimed grease and oil as furnace fuel.

However, belt oil skimmers require maintenance, which is a restraining factor for the Floating Oil Skimmers Market. Only a well-maintained belt oil skimmer will remove oil. To keep their belt oil skimmer working, users need to perform certain basic maintenance tasks on a regular basis.

Global Floating Oil Skimmers Market: Segmentation Analysis

The Global Floating Oil Skimmers Market is segmented on the basis of Product, Application, and Geography.

Floating Oil Skimmers Market, By Product

• Belt Oil Skimmers
• Disc Oil Skimmers
• Others
• Global Floating Oil Skimmers Market is segmented into Belt Oil Skimmers, Disc Oil Skimmers, and Others, on the basis of Product. An endless belt of corrosion-resistant steel or synthetic medium is lowered into the tank or vessel to be skimmed by belt-type oil skimmers. The oil is removed from both sides of the medium when the belt passes through resilient wiper blades. Belt machines remove oil, grease, and other hydrocarbons from water in a simple, dependable, and cost-effective method. A disk-shaped medium is rotated through the liquid using disc oil skimmers. In a similar manner to belt oil skimmers, oil is wiped off and discharged into a collection container.

Floating Oil Skimmers Market, By Application

• Wastewater Sumps
• Coolants and Cutting Fluids
• Steel Mills
• Others
• Global Floating Oil Skimmers Market is segmented into Wastewater Sumps, Coolants and Cutting Fluids, Steel Mills, and Others on the basis of Application. Waste oil collects in a central tank or sump in most industrial or processing companies' water systems. Skimming the floating oils with low water content can decrease the cost of disposal and the potential liabilities connected with wastewater discharge.

Floating Oil Skimmers Market, By Geography

• North America
• Europe
• Asia Pacific
• Rest of the world
• On the basis of regional analysis, the Global Floating Oil Skimmers Market is classified into North America, Europe, Asia Pacific, and Rest of the world. Asia Pacific segment is expected to grow at a significant growth during forecasted years owing to rapid industrialization in this region.

Key Players

• The "Global Floating Oil Skimmers Market" study report will provide a valuable insight with an emphasis on the global market including some of the major players such as
• Abanaki Corporation, Elastec, SkimOIL, Inc., Wayne Products, Zebra Skimmers, Friess GmbH, Megator, KEM Co., Ltd.

Our market analysis also entails a section solely dedicated to such major players wherein our analysts provide an insight into the financial statements of all the major players, along with its product benchmarking and SWOT analysis. The competitive landscape section also includes key development strategies, market share, and market ranking analysis of the above-mentioned players globally.

TABLE OF CONTENTS

1 INTRODUCTION OF GLOBAL FLOATING OIL SKIMMERS MARKET

• 1.1 Overview of the Market
• 1.2 Scope of Report
• 1.3 Assumptions

2 EXECUTIVE SUMMARY

3 RESEARCH METHODOLOGY OF VERIFIED MARKET RESEARCH

• 3.1 Data Mining
• 3.2 Validation
• 3.3 Primary Interviews
• 3.4 List of Data Sources

4 GLOBAL FLOATING OIL SKIMMERS MARKET OUTLOOK

• 4.1 Overview
• 4.2 Market Dynamics
  • 4.2.1 Drivers
  • 4.2.2 Restraints
  • 4.2.3 Opportunities
• 4.3 Porters Five Force Model
• 4.4 Value Chain Analysis

5 GLOBAL FLOATING OIL SKIMMERS MARKET, BY PRODUCT

• 5.1 Overview
• 5.2 Belt Oil Skimmers
• 5.3 Disc Oil Skimmers
• 5.4 Others

6 GLOBAL FLOATING OIL SKIMMERS MARKET, BY APPLICATION

• 6.1 Overview
• 6.2 Wastewater Sumps
• 6.3 Coolants and Cutting Fluids
• 6.4 Steel Mills
• 6.5 Others

7 GLOBAL FLOATING OIL SKIMMERS MARKET, BY GEOGRAPHY

• 7.1 Overview
• 7.2 North America
  • 7.2.1 U.S.
  • 7.2.2 Canada
  • 7.2.3 Mexico
• 7.3 Europe
  • 7.3.1 Germany
  • 7.3.2 U.K.
  • 7.3.3 France
  • 7.3.4 Rest of Europe
• 7.4 Asia Pacific
  • 7.4.1 China
  • 7.4.2 Japan
  • 7.4.3 India
  • 7.4.4 Rest of Asia Pacific
• 7.5 Rest of the World
  • 7.5.1 Latin America
  • 7.5.2 Middle East and Africa

8 GLOBAL FLOATING OIL SKIMMERS MARKET COMPETITIVE LANDSCAPE

• 8.1 Overview
• 8.2 Company Market Ranking
• 8.3 Key Development Strategies

9 COMPANY PROFILES

• 9.1 Abanaki Corporation
  • 9.1.1 Overview
  • 9.1.2 Financial Performance
  • 9.1.3 Product Outlook
  • 9.1.4 Key Developments
• 9.2 Elastec
  • 9.2.1 Overview
  • 9.2.2 Financial Performance
  • 9.2.3 Product Outlook
  • 9.2.4 Key Developments
• 9.3 SkimOIL, Inc
  • 9.3.1 Overview
  • 9.3.2 Financial Performance
  • 9.3.3 Product Outlook
  • 9.3.4 Key Developments
• 9.4 Wayne Products
  • 9.4.1 Overview
  • 9.4.2 Financial Performance
  • 9.4.3 Product Outlook
  • 9.4.4 Key Developments
• 9.5 Zebra Skimmers
  • 9.5.1 Overview
  • 9.5.2 Financial Performance
  • 9.5.3 Product Outlook
  • 9.5.4 Key Developments
• 9.6 Friess GmbH
  • 9.6.1 Overview
  • 9.6.2 Financial Performance
  • 9.6.3 Product Outlook
  • 9.6.4 Key Development
• 9.7 Megator
  • 9.7.1 Overview
  • 9.7.2 Financial Performance
  • 9.7.3 Product Outlook
  • 9.7.4 Key Developments
• 9.8 KEM Co., Ltd.
  • 9.8.1 Overview
  • 9.8.2 Financial Performance
  • 9.8.3 Product Outlook
  • 9.8.4 Key Developments

10 Related Reports