封面
市场调查报告书
商品编码
1623400

风力涡轮机齿轮润滑油的全球市场规模:按产品、按应用、按地区、范围和预测

Global Wind Turbine Gear Lubricant Market Size By Product (Mineral-Based Lubricants, Synthetic-Based Lubricants), By Application (On-Shore, Off-Shore), By Geographic Scope And Forecast

出版日期: | 出版商: Verified Market Research | 英文 202 Pages | 商品交期: 2-3个工作天内

价格
简介目录

风电齿轮润滑油市场规模及预测

2024年风力涡轮机齿轮润滑油市场规模为1.9353亿美元,在2024-2031年预测期间复合年增长率为6.90%,预计到2031年将达到3.3004亿美元。风力涡轮机安装数量的增加正在推动全球对风力涡轮机齿轮油的需求。风力涡轮机齿轮油需求的成长将取决于换油频率和新风力涡轮机安装等因素。亚太地区、欧洲和北美风力发电厂的增加预计将推动风力涡轮机齿轮油市场的发展。此外,全球风电场容量的增加和风电场专案的激增将推动市场成长。全球风力涡轮机齿轮润滑油市场报告提供了对市场的整体评估。它对关键细分市场、趋势、市场推动因素、阻碍因素、竞争格局以及在市场中发挥关键作用的因素进行了全面分析。

全球风力涡轮机齿轮润滑油市场的定义

风力涡轮机多年来一直以一种形式使用。涡轮滚动轴承中齿轮油的主要作用是最大限度地减少滚动表面和滑动表面之间的接触。因此,摩擦和磨损保持在咖啡水平。齿轮油具有以下优点,包括散热轴承、防止腐蚀、冲洗磨损颗粒和污染物(带油过滤的循环油润滑)以及支持轴承密封件的密封效果(润滑脂套环和气动油润滑)。 。相对运动的表面完全或几乎完全被润滑油膜隔开。

液力齿轮油主要用于额定输出0.75MW至2.5MW的风力发电机组。此润滑剂透过接触表面的相对运动移动到狭窄的润滑间隙。由于直接接触区域存在非常高的压力,这里的润滑油在短时间内具有非常高的黏度,促进接触表面的分离。容量范围为4兆瓦至5兆瓦的先进风力涡轮机的开发正处于测试阶段。

全球风力涡轮机齿轮润滑油市场概况

由于风能对环境无害,其作为电力来源的需求将会增加,并具有扩大风能产业的潜力。这种成长正在推动全球对风力涡轮机齿轮润滑油市场的需求。此外,各国政府正在推动风能产业的发展。随着政府机构对风力发电机零件和设备实施补贴、退税和最低采购价格等政策,鼓励传统能源向再生能源转型,风能变得越来越受欢迎,并取得了巨大的成长。

增加政府支出以发展再生能源发电厂、太阳能和风能等基础设施发展。这可能会推动风力涡轮机齿轮润滑油市场的发展。此外,技术创新和进步促进了数位风电场的发展,其中包括风力涡轮机产品和支援解决方案。预计这些将推动全球风力涡轮机齿轮润滑油市场的成长。

也存在阻碍整体市场成长的课题和阻碍因素。转向合成润滑油等因素导致风力涡轮机齿轮润滑油市场的整体需求萎缩。此外,不断提高的电池平价限制了市场的成长。此外,油价上涨和环境恶化预计将在预测期内减缓成长。严格的环境标准和政府的持续改革是阻碍全球风力涡轮机齿轮润滑油市场整体成长的潜在阻碍因素。然而,技术的进步和对再生能源的需求提供了利润丰厚的成长机会。

目录

第1章 全球风电齿轮润滑油市场介绍

  • 市场概况
  • 调查范围
  • 先决条件

第 2 章执行摘要

第3章 验证市场研究研究方法

  • 数据挖掘
  • 验证
  • 一次资料
  • 数据源列表

第4章全球风电齿轮润滑油市场展望

  • 概述
  • 市场动态
    • 促进因素
    • 阻碍因素
    • 机会
  • 波特的五力模型
  • 价值链分析

第5章全球风力涡轮机齿轮润滑油市场:依产品

  • 概述
  • 矿物润滑剂
  • 合成润滑剂

第6章全球风力发电机齿轮润滑油市场:依应用分类

  • 概述
  • 陆上
  • 离岸

第7章全球风力发电机齿轮润滑油市场:依地区

  • 概述
  • 北美
    • 美国
    • 加拿大
    • 墨西哥
  • 欧洲
    • 德国
    • 英国
    • 法国
    • 欧洲其他地区
  • 亚太地区
    • 中国
    • 日本
    • 印度
    • 亚太其他地区
  • 世界其他地区
    • 拉丁美洲
    • 中东/非洲

第8章全球风力涡轮机齿轮润滑油市场:竞争格局

  • 概述
  • 各公司市场排名
  • 主要发展策略

第9章 公司简介

  • Exxon Mobil
  • Royal Dutch Shell
  • AMSOIL
  • BP
  • Chevron
  • Castrol
  • Kluber Lubrication
  • Afton Chemical
  • Evonik Industries

第10章附录

  • 相关研究
简介目录
Product Code: 22110

Wind Turbine Gear Lubricant Market Size And Forecast

Wind Turbine Gear Lubricant Market size was valued at USD 193.53 Million in 2024 and is projected to reach USD 330.04 Million by 2031, growing at a CAGR of 6.90% during the forecasted period 2024 to 2031. The growing number of wind turbine installations is boosting the demand for wind turbine gear oil globally. The growing demand for wind turbine gear oil is dependent on factors such as the frequency of oil change and new wind turbine installations. The growing number of wind farms in APAC, Europe, and North America is expected to drive the market for wind turbine gear oil. Moreover, The growing capacity of wind farms and the surge in the number of wind farm projects globally will foster market growth. The Global Wind Turbine Gear Lubricant Market report provides a holistic evaluation of the market. The report offers a comprehensive analysis of key segments, trends, drivers, restraints, competitive landscape, and factors that are playing a substantial role in the market.

Global Wind Turbine Gear Lubricant Market Definition

Wind turbines have been used in one form over many years. The primary function of the gear oil for rolling bearings during a turbine is to minimize contact between rolling and sliding surfaces. As a result, friction and wear are kept to a coffee level. Gear oil comprises the following functions - heat dissipation from the bearing, corrosion protection, flushing out of wear particles and contaminants (recirculating oil lubrication with filtration of the oil), and support for the sealing effect of bearing seals i.e. grease collar and pneumatic oil lubrication. Surfaces moving relative to every other are separated completely or almost completely by a lubricant film.

This film is called gear oil. Hydrodynamic lubrication gear oil is predominantly used for wind turbines with a power rating of 0.75 MW to 2.5 MW. This lubricant is transferred to the narrowing lubrication gap through the motion of the contact surfaces relative to one another. Due to the extremely high pressure present in the immediate contact zone, the lubricant here has extremely high viscosity for a brief period and facilitates the separation of the contact surfaces. Development of advanced wind turbines within the 4 MW to five MW capacity range is under the testing phase.

What's inside a VMR industry report?

Our reports include actionable data and forward-looking analysis that help you craft pitches, create business plans, build presentations and write proposals.

Global Wind Turbine Gear Lubricant Market Overview

A rise in demand for wind energy as a source of electricity owing to its environmentally-friendly nature can augment the wind energy sector. This augmentation is boosting the global need for Wind Turbine Gear Lubricant Market. Moreover, the governments of various countries are promoting the wind energy industry. Wind energy is experiencing significant growth as government bodies are implementing policies such as subsidiaries, tax rebates, and minimum purchase price on wind turbine components and equipment for facilitating a shift from conventional energy to renewable energy.

Increased government spending to develop plants for the generation of renewable energy, developing infrastructure such as solar and wind energy. This, in turn, is likely to drive the Wind Turbine Gear Lubricant Market. Furthermore, Technological innovations and advancements have resulted in the development of digital wind farms which comprise wind turbine products and supporting solutions. These have positively anticipated propelling the growth of the Global Wind Turbine Gear Lubricant Market.

There are certain challenges and restraints faced that will hinder the overall market growth. The factors such as the shift toward synthetic lubricants caused a shrink in the overall demand for Wind Turbine Gear Lubricant Market. Also, increasing battery parity is limiting the market growth. Further, increasing crude oil prices, environmental degradation are estimated to sluggish growth during the forecast period. The stringent environmental norms and continuous reforms by governments are the potential restraints hampering the overall growth of the Global Wind Turbine Gear Lubricant Market. Nevertheless, the advancements in technologies, demand for renewable energy offer favorable growth opportunities.

Global Wind Turbine Gear Lubricant Market Segmentation Analysis

The Global Wind Turbine Gear Lubricant Market is segmented on the basis of Product, Application, And Geography.

Wind Turbine Gear Lubricant Market, By Product

  • Mineral-Based Lubricants
  • Synthetic-Based Lubricants

Based on Product, the market is bifurcated into Mineral-Based Lubricants and Synthetic-Based Lubricants. The synthetic-based lubricants segment holds the largest market share and is estimated to witness the highest CAGR during the forecast period.

Wind Turbine Gear Lubricant Market, By Application

  • On-Shore
  • Off-Shore

Based on Application, the market is bifurcated into On-Shore and Off-Shore. The on-shore segment holds the largest market share during the forecast period. The factors that can be attributed to increasing well operations in the onshore fields especially in Saudi Arabia, growing demand for oil and gas, the growing number of research initiatives to develop abandoned oil wells, and renewed projects that are accelerating the demand for the on-shore segment.

Wind Turbine Gear Lubricant Market, By Geography

  • North America
  • Europe
  • Asia Pacific
  • Rest of the world

Based on Geography, the market is classified into North America, Europe, Asia Pacific, and the Rest of the world. Asia-Pacific holds the largest market share. The favorable regulatory norms in the Asia Pacific, strong governmental initiatives to encourage renewable power generation, rise in investments to explore the potential of the offshore wind energy sector, and ongoing projects will boost the market in the APAC region.

Key Players

  • The "Global Wind Turbine Gear Lubricant Market" study report will provide a valuable insight with an emphasis on the global market including some of the major players such as
  • Exxon Mobil, Royal Dutch Shell, AMSOIL, BP, Chevron, Castrol, Kluber Lubrication, Afton Chemical, Evonik Industries, FUCHS, Lubrita, Quaker Chemical.

Our market analysis also entails a section solely dedicated to such major players wherein our analysts provide an insight into the financial statements of all the major players, along with its product benchmarking and SWOT analysis. The competitive landscape section also includes key development strategies, market share, and market ranking analysis of the above-mentioned players globally.

TABLE OF CONTENTS

1. Introduction of Global Wind Turbine Gear Lubricant Market

  • 1.1 Overview of the Market
  • 1.2 Scope of Report
  • 1.3 Assumptions

2. Executive Summary

3. Research Methodology of Verified Market Research

  • 3.1 Data Mining
  • 3.2 Validation
  • 3.3 Primary Interviews
  • 3.4 List of Data Sources

4. Global Wind Turbine Gear Lubricant Market Outlook

  • 4.1 Overview
  • 4.2 Market Dynamics
    • 4.2.1 Drivers
    • 4.2.2 Restraints
    • 4.2.3 Opportunities
  • 4.3 Porters Five Force Model
  • 4.4 Value Chain Analysis

5. Global Wind Turbine Gear Lubricant Market, By Product

  • 5.1 Overview
  • 5.2 Mineral-Based Lubricants
  • 5.3 Synthetic-Based Lubricants

6. Global Wind Turbine Gear Lubricant Market, By Application

  • 6.1 Overview
  • 6.2 On-Shore
  • 6.3 Off-Shore

7. Global Wind Turbine Gear Lubricant Market, By Geography

  • 7.1 Overview
  • 7.2 North America
    • 7.2.1 U.S.
    • 7.2.2 Canada
    • 7.2.3 Mexico
  • 7.3 Europe
    • 7.3.1 Germany
    • 7.3.2 U.K.
    • 7.3.3 France
    • 7.3.4 Rest of Europe
  • 7.4 Asia Pacific
    • 7.4.1 China
    • 7.4.2 Japan
    • 7.4.3 India
    • 7.4.4 Rest of Asia Pacific
  • 7.5 Rest of the World
    • 7.5.1 Latin America
    • 7.5.2 Middle East And Africa

8. Global Wind Turbine Gear Lubricant Market Competitive Landscape

  • 8.1 Overview
  • 8.2 Company Market Ranking
  • 8.3 Key Development Strategies

9. Company Profiles

  • 9.1 Exxon Mobil
    • 9.1.1 Overview
    • 9.1.2 Financial Performance
    • 9.1.3 Product Outlook
    • 9.1.4 Key Developments
  • 9.2 Royal Dutch Shell
    • 9.2.1 Overview
    • 9.2.2 Financial Performance
    • 9.2.3 Product Outlook
    • 9.2.4 Key Developments
  • 9.3 AMSOIL
    • 9.3.1 Overview
    • 9.3.2 Financial Performance
    • 9.3.3 Product Outlook
    • 9.3.4 Key Developments
  • 9.4 BP
    • 9.4.1 Overview
    • 9.4.2 Financial Performance
    • 9.4.3 Product Outlook
    • 9.4.4 Key Developments
  • 9.5 Chevron
    • 9.5.1 Overview
    • 9.5.2 Financial Performance
    • 9.5.3 Product Outlook
    • 9.5.4 Key Developments
  • 9.6 Castrol
    • 9.6.1 Overview
    • 9.6.2 Financial Performance
    • 9.6.3 Product Outlook
    • 9.6.4 Key Developments
  • 9.7 Kluber Lubrication
    • 9.7.1 Overview
    • 9.7.2 Financial Performance
    • 9.7.3 Product Outlook
    • 9.7.4 Key Developments
  • 9.8 Afton Chemical
    • 9.8.1 Overview
    • 9.8.2 Financial Performance
    • 9.8.3 Product Outlook
    • 9.8.4 Key Developments
  • 9.9 Evonik Industries
    • 9.9.1 Overview
    • 9.9.2 Financial Performance
    • 9.9.3 Product Outlook
    • 9.9.4 Key Developments

10. Appendix

  • 10.1 Related Research