全球牙科玻璃离子水门汀（GIC）市场（按产品类型、应用、区域范围和预测）

牙科玻璃离子水门汀（GIC）的市场规模及预测

2024 年牙科玻璃离子水门汀 (GIC) 市场规模价值为 13.9 亿美元，预计到 2032 年将达到 18.6 亿美元，预测期内（2026-2032 年）的复合年增长率为 4.4%。

牙科疾病盛行率的上升、技术和材料的进步是预测期内推动市场发展的因素之一。全球牙科玻璃离子水泥（GIC）市场报告对市场进行了全面评估。它对关键细分市场、趋势、市场驱动因素、限制因素、竞争格局以及在市场中发挥关键作用的因素进行了全面的分析。

定义全球牙科玻璃离子水门汀 (GIC) 市场

玻璃离子水门汀是一种牙科修復材料，在牙科中用作填充材、黏合剂以及矫正托槽附件。玻璃离子水泥是基于硅酸盐玻璃粉（钙铝氟硅酸盐玻璃）与聚丙烯酸（离子聚合物）的反应。牙医必须确保遵循每种类型製造商的说明，包括混合水泥、使用正确的比例以及在正确的温度下使用。牙科水泥有五种类型：氧化锌丁香油、磷酸锌、聚羧酸盐、玻璃离子和复合树脂。 GIC 膜厚度薄，防潮性能优良，并能释放氟化物，可使脱矿牙齿再矿化。玻璃离子水门汀主要用于预防龋齿。这种牙科材料对牙齿结构具有优异的黏附性，并能在牙齿内部结构和周围环境之间形成强而有力的密封。与不使用封闭剂相比，在臼齿咬合面上涂抹玻璃离子封闭剂可以减少龋齿。玻璃离子水门汀最初用于前牙的美观修復，建议用于 III 类和 V 类龋洞的修復。

全球牙科玻璃离子水门汀（GIC）市场概况

牙科疾病盛行率的上升以及技术和材料的进步是预测期内推动市场发展的因素之一。龋齿盛行率的上升是推动市场成长的主要因素。 GIC 膜厚度薄，防潮性强，能释放氟化物，可使脱矿牙齿再矿化。 GIC 的这些独特特性预计将刺激市场需求。

此外，预计玻璃离子水门汀（GIC）的快速进步将推动预测期内的成长。新的发展包括纤维和金属增强水泥、无机聚合物氧化物、树脂改质离子聚合物、奈米粒子和羟基磷灰石的使用以及溶胶-凝胶製程。这些进步是以牺牲传统牙科材料的各种缺点为代价的，例如复合树脂（耗时且技术黏合性差）和汞合金（美观性差且含有对人体有害的汞）。这些缺点正是 GIC 越来越受欢迎的原因。 GIC 更易于使用、更安全，并且具有优异的化学和物理特性。

此外，全球口腔卫生意识的提高预计将进一步刺激需求。此外，专家和演讲者正在透过网站和部落格传播有关口腔卫生益处的认识，促进和鼓励保持口腔卫生，这有助于促进口腔卫生的发展。新配方的推出也是市场驱动力之一。玻璃离子水门汀（GIC）是世界各地牙医的首选材料，尤其是对儿童而言。随着龋齿发病率的不断上升，研究人员和製造商正在努力推出不同类型的牙科水泥，以满足不同患者的需求。

然而，玻璃离子水门汀也存在一些缺点，阻碍了市场的成长。玻璃离子密封剂和水泥的主要缺点是保留性差或缺乏强度、韧性和耐磨性有限。例如，较低的保留率需要定期召回，即使六个月后，也最终更换遗失的密封剂。为了解决玻璃离子水门汀的这些物理缺陷，人们采用了各种方法，包括热光固化（聚合）、添加氧化锆、羟基磷灰石、N-乙烯基吡咯烷酮、N-乙烯基己内酰胺、氟磷灰石等，以及增强玻璃离子水门汀。

目录

第一章 牙科玻璃离子水门汀（GIC）的全球市场介绍

• 市场概览
• 研究范围
• 先决条件

第二章执行摘要

第三章：已验证的市场研究调查方法

• 资料探勘
• 验证
• 第一手资料
• 资料来源列表

第四章牙科玻璃离子水门汀（GIC）的全球市场展望

• 概述
• 市场动态
  • 驱动程式
  • 限制因素
  • 机会
• 波特五力模型
• 价值链分析

5. 全球牙科玻璃离子水门汀市场（依产品类型）

• 概述
• 修復水泥
• 路亭水泥
• 其他的

6. 全球牙科玻璃离子水门汀市场（依应用）

• 概述
• 医院
• 牙医诊所
• 其他的

7. 全球牙科玻璃离子水门汀市场（按地区）

• 概述
• 北美洲
  • 美国
  • 加拿大
  • 墨西哥
• 欧洲
  • 德国
  • 英国
  • 法国
  • 其他欧洲国家
• 亚太地区
  • 中国
  • 日本
  • 印度
  • 其他亚太地区
• 其他的
  • 拉丁美洲
  • 中东

第八章：牙科玻璃离子水门汀市场的全球竞争格局

• 概述
• 各公司市场排名
• 重点发展策略

第九章 公司简介

• 3M
• DENTSPLY SIRONA
• Mitsui Kulzer
• Shofu
• Ivoclar Vivadent
• VOCO
• Kerr
• DENTAURUM
• Prime Dental
• Promedica

第十章 附录

• 相关调查

Dental Glass Ionomer Cements (GIC) Market Size And Forecast

Dental Glass Ionomer Cements (GIC) Market size was valued at USD 1.39 Billion in 2024 and is projected to reach USD 1.86 Billion by 2032, growing at a CAGR of 4.4% during the forecasted period 2026 to 2032.

Growing prevalence of dental disorders and technological & material advancements are among the factors expected to drive the market over the forecast period. The Global Dental Glass Ionomer Cements (GIC) Market report provides a holistic evaluation of the market. The report offers a comprehensive analysis of key segments, trends, drivers, restraints, competitive landscape, and factors that are playing a substantial role in the market.

Global Dental Glass Ionomer Cements (GIC) Market Definition

A glass ionomer cement is a dental restorative material used in dentistry as a filling material and luting cement, including for orthodontic bracket attachment. Glass-ionomer cements are based on the reaction of silicate glass-powder (calciumaluminofluorosilicate glass) and polyacrylic acid, an ionomer. Dentists must make sure to follow the manufacturer's directions for each type of cement, in terms of mixing, using the correct ratios and subjecting it to the correct temperatures. There are five types of dental cement: zinc-oxide eugenol, zinc phosphate, polycarboxylate, glass ionomer and composite resin. GIC has thin film thickness, high moisture tolerance, and the ability to release fluoride, which may lead to remineralization of demineralized tooth. Glass ionomer cement is primarily used in the prevention of dental caries. This dental material has good adhesive bond properties to tooth structure, allowing it to form a tight seal between the internal structures of the tooth and the surrounding environment. The application of glass ionomer sealants to occlusal surfaces of the posterior teeth, reduce dental caries in comparison to not using sealants at all. Glass ionomer cements were initially intended to be used for the aesthetic restoration of anterior teeth and were recommended for restoring Class III and Class V cavity preparations.

Global Dental Glass Ionomer Cements (GIC) Market Overview

Growing prevalence of dental disorders and technological & material advancements are among the factors expected to drive the market over the forecast period. Rising prevalence of caries is majorly responsible for market growth. GIC has thin film thickness, high moisture tolerance, and the ability to release fluoride, which may lead to remineralization of demineralized tooth. Such unique characteristics of this cement are anticipated to boost market demand.

In addition, rapid advancements in Glass Ionomer Cement (GIC) are expected to drive growth over the forecast period. Some novel developments are fiber or metal reinforced cement, inorganic polymeric oxide, resin-modified ionomer, utilization of nanoparticles & hydroxyapatite, and Sol-Gel method. These advancements are driven by various drawbacks of traditionally used dental materials, such as composite resins (time-consuming and have least technique-sensitive adhesive features) and amalgam (poor aesthetics and contains mercury that is harmful to the human body). Owing to these disadvantages, GICs are gaining popularity. They are easy to use, safer, and have excellent chemical & physical properties.

Furthermore, Increase in oral health awareness initiatives being undertaken across the globe is further estimated to boost demand. In addition, experts and speakers are spreading awareness about the benefits of oral hygiene on their websites & blogs and are promoting & encouraging maintenance of oral health, which aids growth. Introduction of new formulations is another driver of the market. Glass Ionomer Cement (GIC) is preferred by dental surgeons across the globe, especially in children. Owing to increase in dental caries, researchers and manufacturers are taking efforts to introduce different types of dental cement for meeting varied patient requirements.

However there are some disadvantages of glass ionomer cement that may hamper the market growth. The main disadvantage of glass ionomer sealants or cements has been inadequate retention or simply lack of strength, toughness, and limited wear resistance. For instance, due to its poor retention rate, periodic recalls are necessary, even after 6 months, to eventually replace the lost sealant. Different methods have been used to address the physical shortcomings of the glass ionomer cements such as thermo-light curing(polymerization), or addition of the zirconia, hydroxyapatite, N-vinyl pyrrolidone, N-vinyl caprolactam, and fluoroapatite to reinforce the glass ionomer cements.

Global Dental Glass Ionomer Cements (GIC) Market Segmentation Analysis

The Global Dental Glass Ionomer Cements (GIC) Market is segmented On The Basis of Product Type, Application, And Geography.

Dental Glass Ionomer Cements (GIC) Market, By Product Type

• Restorative Cements
• Luting Cements
• Others

Based on Product Type, the market is bifurcated into Restorative Cements, Luting Cements, Others. The Luting Cements segment is expected to inflate the market growth. This can be attributed to the rise in number of restorations at a global level and increase in awareness about dental care. In addition, the easy availability of luting agents is also driving segment growth.

Dental Glass Ionomer Cements (GIC) Market, By Application

• Hospitals
• Dental Clinics
• Others

Based on Application, the market is bifurcated into Hospitals, Dental Clinics, Others. Dental Clinics is anticipated to become the fastest-growing market in the forecast period due to the increasing use of dental cement in restorations.Glass-ionomers have various uses within dentistry. They are used as full restorative materials, especially in the primary dentition, and also as liners and bases, as fissure sealants and as bonding agents for orthodontic brackets.

Dental Glass Ionomer Cements (GIC) Market, By Geography

• North America
• Europe
• Asia Pacific
• Rest of the world
• On the basis of regional analysis, the Global Dental Glass Ionomer Cements (GIC) Market is classified into North America, Europe, Asia Pacific, and Rest of the world. Asia Pacific is expected to grow at a faster pace due to increasing number of dental restorations and growing spending capacity of consumers. In addition, growing dental tourism in emerging economies, such as India, presents an opportunity for industry players. These factors are expected to boost regional market.
• Key Players In Global Dental Glass Ionomer Cements (GIC) Market

The "Global Dental Glass Ionomer Cements (GIC) Market" study report will provide a valuable insight with an emphasis on the global market. The major players in the market are 3M, DENTSPLY SIRONA, Mitsui Kulzer, Shofu, Ivoclar Vivadent, VOCO, Kerr, DENTAURUM, Prime Dental, and Promedica. The competitive landscape section also includes key development strategies, market share, and market ranking analysis of the above-mentioned players globally.

TABLE OF CONTENTS

1 INTRODUCTION OF GLOBAL DENTAL GLASS IONOMER CEMENTS (GIC) MARKET

• 1.1 Overview of the Market
• 1.2 Scope of Report
• 1.3 Assumptions

2 EXECUTIVE SUMMARY

3 RESEARCH METHODOLOGY OF VERIFIED MARKET RESEARCH

• 3.1 Data Mining
• 3.2 Validation
• 3.3 Primary Interviews
• 3.4 List of Data Sources

4 GLOBAL DENTAL GLASS IONOMER CEMENTS (GIC) MARKET OUTLOOK

• 4.1 Overview
• 4.2 Market Dynamics
  • 4.2.1 Drivers
  • 4.2.2 Restraints
  • 4.2.3 Opportunities
• 4.3 Porters Five Force Model
• 4.4 Value Chain Analysis

5 GLOBAL DENTAL GLASS IONOMER CEMENTS (GIC) MARKET, BY PRODUCT TYPE

• 5.1 Overview
• 5.2 Restorative Cements
• 5.3 Luting Cements
• 5.4 Others

6 GLOBAL DENTAL GLASS IONOMER CEMENTS (GIC) MARKET, BY APPLICATION

• 6.1 Overview
• 6.2 Hospitals
• 6.3 Dental Clinics
• 6.4 Others

7 GLOBAL DENTAL GLASS IONOMER CEMENTS (GIC) MARKET, BY GEOGRAPHY

• 7.1 Overview
• 7.2 North America
  • 7.2.1 U.S.
  • 7.2.2 Canada
  • 7.2.3 Mexico
• 7.3 Europe
  • 7.3.1 Germany
  • 7.3.2 U.K.
  • 7.3.3 France
  • 7.3.4 Rest of Europe
• 7.4 Asia Pacific
  • 7.4.1 China
  • 7.4.2 Japan
  • 7.4.3 India
  • 7.4.4 Rest of Asia Pacific
• 7.5 Rest of the World
  • 7.5.1 Latin America
  • 7.5.2 Middle East

8 GLOBAL DENTAL GLASS IONOMER CEMENTS (GIC) MARKET COMPETITIVE LANDSCAPE

• 8.1 Overview
• 8.2 Company Market Ranking
• 8.3 Key Development Strategies

9 COMPANY PROFILES

• 9.1 3M
  • 9.1.1 Overview
  • 9.1.2 Financial Performance
  • 9.1.3 Product Outlook
  • 9.1.4 Key Developments
• 9.2 DENTSPLY SIRONA
  • 9.2.1 Overview
  • 9.2.2 Financial Performance
  • 9.2.3 Product Outlook
  • 9.2.4 Key Developments
• 9.3 Mitsui Kulzer
  • 9.3.1 Overview
  • 9.3.2 Financial Performance
  • 9.3.3 Product Outlook
  • 9.3.4 Key Developments
• 9.4 Shofu
  • 9.4.1 Overview
  • 9.4.2 Financial Performance
  • 9.4.3 Product Outlook
  • 9.4.4 Key Developments
• 9.5 Ivoclar Vivadent
  • 9.5.1 Overview
  • 9.5.2 Financial Performance
  • 9.5.3 Product Outlook
  • 9.5.4 Key Developments
• 9.6 VOCO
  • 9.6.1 Overview
  • 9.6.2 Financial Performance
  • 9.6.3 Product Outlook
  • 9.6.4 Key Developments
• 9.7 Kerr
  • 9.7.1 Overview
  • 9.7.2 Financial Performance
  • 9.7.3 Product Outlook
  • 9.7.4 Key Developments
• 9.8 DENTAURUM
  • 9.8.1 Overview
  • 9.8.2 Financial Performance
  • 9.8.3 Product Outlook
  • 9.8.4 Key Developments
• 9.9 Prime Dental
  • 9.9.1 Overview
  • 9.9.2 Financial Performance
  • 9.9.3 Product Outlook
  • 9.9.4 Key Developments
• 9.10 Promedica
  • 9.10.1 Overview
  • 9.10.2 Financial Performance
  • 9.10.3 Product Outlook
  • 9.10.4 Key Developments

10 Appendix

• 10.1 Related Research