查看购物车
  • Traditional Chinese
  • English
  • Japanese
封面
市场调查报告书
商品编码
1738519

全球轮胎边缘钢丝（轮胎轮胎边缘钢丝）市场规模（依产品类型、应用、区域范围、预测）

Global Bead Wire (Tyre Bead Wire) Market Size By Product Type, By Application, By Geographic Scope And Forecast
出版日期: | 出版商: Verified Market Research | 英文 202 Pages | 商品交期: 2-3个工作天内

价格
简介目录

轮胎边缘钢丝（轮胎轮胎边缘钢丝）市场规模及预测

2024 年胎圈钢丝（轮胎轮胎边缘钢丝）市场规模为 12.5696 亿美元，预计到 2032 年将达到 21.1805 亿美元，2026 年至 2032 年的复合年增长率为 6.74%。

稳定的政府框架、强劲的购买力、庞大的国内市场以及持续的基础设施推动了市场需求。全球轮胎轮胎边缘钢丝（ 轮胎边缘 Wire）市场报告对市场进行了全面的评估，包括关键细分市场、趋势、市场驱动因素、限制因素、竞争格局以及影响市场的关键因素。

全球轮胎边缘圈轮胎边缘市场定义

胎轮胎边缘钢丝是一种表面镀黄铜或青铜的碳钢钢丝。它强度高、柔韧性好、疲劳性能好、平直度好，且易于与橡胶黏合。它主要用作轮胎轮胎边缘的增强材料。该产品可防止轮胎形状因气压和其他外部因素而改变。轮胎边缘与车轮接触的部分称为胎轮胎边缘。越野车驾驶员经常会降低轮胎气压。

这会导致轮胎胎面加宽，从而增加胎面抓地力。如果胎压过低，轮胎边缘无法牢牢固定在车轮上，可能会轮胎边缘。在这种情况下，通常会使用轮胎边缘锁将轮胎边缘固定在车轮上。生锈会导致轮胎边缘在轮圈上，需要使用拆轮胎边缘器。普通轮胎由许多不同的部件组成。胎轮胎边缘被认为是轮胎最重要的部件之一。

车辆可以使用没有胎面的充气轮胎行驶，但如果没有功能正常的胎轮胎边缘，轮胎就无法正确固定在轮圈上，最终变得毫无用处。胎轮胎边缘紧密贴合轮圈的内槽，形成密封，即使车轮或轮圈出现轻微刮痕，轮胎也能保持气压。所有轮胎，无论是无内胎轮胎或有内胎，都是如此。胎轮胎边缘是轮胎的内圈，连接轮胎和轮辋，并支撑整个车轮。

胎轮胎边缘由橡胶带製成，并用钢丝等耐用材料加固。轮胎轮胎边缘使用的橡胶非常坚硬。因此，需要专用设备才能将轮胎正确地安装在车轮或轮圈上。轮胎边缘橡胶具有高摩擦力，能够牢牢抓住轮圈的内外，防止轮胎在车轮旋转时打滑。轮胎边缘以充气固定。轮胎有两种类型：子午线轮胎和斜交轮胎。轮胎的分类是基于轮胎的结构和特性。

全球轮胎边缘钢丝（轮胎轮胎边缘钢丝）市场概况

稳定的政府框架、不断增长的购买力、庞大的国内市场以及持续的基础设施正在催生市场需求。轮胎平衡轮胎边缘能够经济地平衡卡车和拖车所有车轮位置的整个车轮组件。轮胎轮胎边缘能够防止道路危险和轮胎内部堵塞，并保护环境免受铅危害，因为它们不会像铅块那样脱落。轮胎边缘内的橡胶具有较高的摩擦点，并在内外轮圈上形成强大的抓地力，防止轮胎在车轮旋转时打滑。空气将轮胎边缘固定指定。轮胎有两种类型：子午线轮胎和斜交轮胎。

轮胎的分类是基于其结构和特性。大多数乘用车很少出现胎轮胎边缘问题，除非安装或拆卸轮胎。对于安装在轮圈上的轮胎，水可能会渗入轮胎边缘圈内的钢丝绳，从而导致问题。有时，轮胎边缘会黏在轮圈上，需要使用轮胎边缘切割器才能正确拆卸轮胎。越野和攀岩是胎轮胎边缘问题常见的运动。众所周知，驾驶这些运动的车辆的驾驶员会降低胎压以增加轮胎的接地面积。如果胎压不足，轮胎边缘可能会滑落并从轮圈凹槽中脱出。这被称为「胎圈脱落」。

目录

第一章 全球轮胎边缘钢丝（轮胎轮胎边缘钢丝）市场介绍

  • 市场概览
  • 研究范围
  • 先决条件

第二章执行摘要

第三章：已验证的市场研究调查方法

  • 资料探勘
  • 验证
  • 第一手资料
  • 资料来源列表

第四章 全球轮胎边缘钢丝（轮胎轮胎边缘钢丝）市场展望

  • 概述
  • 市场动态
    • 驱动程式
    • 限制因素
    • 机会
  • 波特五力模型
  • 价值链分析

第五章 全球轮胎边缘钢丝（轮胎轮胎边缘钢丝）市场依产品类型

  • 概述
  • 0.78～1.60mm
  • 1.60～1.83mm
  • 1.83毫米或以上

第六章 全球轮胎边缘钢丝（轮胎轮胎边缘钢丝）市场应用

  • 概述
  • 子午线轮胎
  • 斜交轮胎

第七章 全球轮胎边缘钢丝（轮胎轮胎边缘钢丝）市场（按地区）

  • 概述
  • 北美洲
    • 美国
    • 加拿大
    • 墨西哥
  • 欧洲
    • 德国
    • 英国
    • 法国
    • 其他欧洲国家
  • 亚太地区
    • 中国
    • 日本
    • 印度
    • 其他亚太地区
  • 其他的
    • 拉丁美洲
    • 中东和非洲

第八章全球轮胎边缘圈钢丝（轮胎轮胎边缘钢丝）市场竞争格局

  • 概述
  • 各公司市场排名
  • 重点发展策略

第九章 公司简介

  • Bekaert
  • Kiswire
  • Rajratan
  • Heico Wire Group
  • TATA Steel
  • WireCo WorldGroup
  • Shandong Daye
  • Xingda
  • Snton
  • Xinglun

第十章 附录

  • 相关调查
简介目录
Product Code: 59436

Bead Wire (Tyre Bead Wire) Market Size And Forecast

+Bead Wire (Tyre Bead Wire) Market size was valued at USD 1256.96 Million in 2024 and is projected to reach USD 2118.05 Million by 2032, growing at a CAGR of 6.74% from 2026 to 2032.

The market demand has been created by a stable government framework, greater purchasing power, a big domestic market, and ongoing infrastructural development. The Global Bead Wire (Tyre Bead Wire) Market report provides a holistic evaluation of the market. The report offers a comprehensive analysis of key segments, trends, drivers, restraints, competitive landscape, and factors that are playing a substantial role in the market.

Global Bead Wire (Tyre Bead Wire) Market Definition

Tyre bead wire is a high-carbon steel wire with brass or bronze plating on the surface. It has high strength, outstanding flexibility, superior fatigue properties, and great linearity, and can be easily adhered to rubber. It is mostly utilized as reinforcing materials in the tyre bead. This product keeps tyres from altering shape as a result of air pressure or other external influences. The edge of a tyre that sits on the wheel is referred to as a Tyre bead. It is usual for off-road vehicle drivers to lower the air pressure in their tyres.

As a result, the tire's tread spreads out, providing more surface area for the tread to grasp the terrain. If the pressure is too low, the bead may not be able to stay on the wheel, causing it to pop off; this is known as "losing a bead." In this situation, bead locks, which clamp the bead on the wheel, are frequently utilized. After rusting, the bead can become frozen to the rim, necessitating the employment of a bead breaker. The average tyre consists of a number of different components. The tyre bead is easily considered to be one of the most crucial components.

A vehicle can still travel on an inflated tyre without tread, but without a working tyre bead, the tyre would simply not stay tight on the rim, leaving it unusable. A tyre bead can stick firm to the inner groove of the rim and create a seal that allows a tyre to stay inflated even if the wheel or rim has minor damage. This is true for all tyres, whether they are tubeless or have inner tubes. The tyre bead is the tire's inner circle, the component that joins the tyre to the rim and holds the entire wheel together.

This bead is made up of a rubber band that has been strengthened with a durable substance like steel cable. The rubber compound utilized in tyre bead construction is extremely hard and rigid. As a result, special equipment is required to properly mount tyres onto a set of wheels or rims. The bead's rubber provides a high friction point and strong grip on the inner and outer rims, keeping the tyre from slipping when the wheel rolls. Inflation holds the bead in place. Radial tyres and bias-ply tyres are the two types of tyres available. The classifications are based on the construction and characteristics of the tyre.

Global Bead Wire (Tyre Bead Wire) Market Overview

The market demand has been created by a stable government framework, greater purchasing power, a big domestic market, and ongoing infrastructural development. Balancing the Tires Beads economically balance the entire wheel assembly in all-wheel positions on both the truck and the trailer. Tire beads are protected from road dangers and blockages inside the tyre, and they will not fall off like lead weights, preserving the environment from the hazards of lead. The bead's rubber provides a high friction point and strong grip on the inner and outer rims, keeping the tyre from slipping when the wheel rolls. Inflation holds the bead in place. Radial tyres and bias-ply tyres are the two types of tyres available.

The classifications are based on the construction and characteristics of the tyre. Except when mounting or removing a tyre, most passenger automobiles will rarely have problems with a tyre bead. Water can sometimes get into the steel cable within the bead, causing an issue with a tyre mounted on a rim. The bead can become attached to the rim, necessitating the use of a bead cutter to remove the tyre properly. Off-roading and rock crawling are the sports where most tyre bead troubles arise. The air pressure in tyres is known to be reduced by drivers of cars used for these sports in order to extend the footprint or contact area of the tyre. A bead might slip and detach from the groove in the rim if there isn't enough filled pressure. This is referred to as a "lost bead."

Global Bead Wire (Tyre Bead Wire) Market: Segmentation Analysis

The Global Bead Wire (Tyre Bead Wire) Market is Segmented on the basis of Product Type, Application And Geography.

Bead Wire (Tyre Bead Wire) Market, By Product Type

  • 0.78~1.60 mm
  • 1.65~1.83 mm
  • Above 1.83 mm

Based on Product Type, The Market is bifurcated into 0.78~1.60 mm, 1.65~1.83 mm and Above 1.83 mm. During the forecast period, the 0.781.60 mm wire diameter Tyre Bead Wire segment is expected to account for the biggest sales volume share in 2017, this segment was forecasted to account for 83.88 percent volume share.

Bead Wire (Tyre Bead Wire) Market, By Application

  • Radial Tire
  • Bias Tire

Based on Application, The Market is bifurcated into Radial Tire and Bias Tire. In 2017, the Radial Tire segment was anticipated to have the biggest sales volume share of 86.70 percent, and by the end of 2025, it is expected to have a considerable market share.

Bead Wire (Tyre Bead Wire) Market, By Geography

  • North America
  • Europe
  • Asia Pacific
  • Rest of the world
  • On the basis of Geography, The Global Bead Wire (Tyre Bead Wire) Market is classified into North America, Europe, Asia Pacific, and the Rest of the world. with a market share of almost 31.23 percent in 2016, China was the leading consumer of Tyre Bead Wire. In 2016, Europe was the second-largest consumer of Tyre Bead Wire.

Key Players

The "Global Bead Wire (Tyre Bead Wire) Market" study report will provide valuable insight with an emphasis on the global market. The major players in the market are Bekaert, Kiswire, Rajratan, Heico Wire Group, TATA Steel, WireCo WorldGroup, Shandong Daye, Xingda, Snton and Xinglun.

  • The competitive landscape section also includes key development strategies, market share and market ranking analysis of the above-mentioned players globally.

TABLE OF CONTENTS

1 INTRODUCTION OF GLOBAL BEAD WIRE (TYRE BEAD WIRE) MARKET

  • 1.1 Overview of the Market
  • 1.2 Scope of Report
  • 1.3 Assumptions

2 EXECUTIVE SUMMARY

3 RESEARCH METHODOLOGY OF VERIFIED MARKET RESEARCH

  • 3.1 Data Mining
  • 3.2 Validation
  • 3.3 Primary Interviews
  • 3.4 List of Data Sources

4 GLOBAL BEAD WIRE (TYRE BEAD WIRE) MARKET OUTLOOK

  • 4.1 Overview
  • 4.2 Market Dynamics
    • 4.2.1 Drivers
    • 4.2.2 Restraints
    • 4.2.3 Opportunities
  • 4.3 Porters Five Force Model
  • 4.4 Value Chain Analysis

5 GLOBAL BEAD WIRE (TYRE BEAD WIRE) MARKET, BY PRODUCT TYPE

  • 5.1 Overview
  • 5.2 0.78~1.60 mm
    • 5.31.65~1.83 mm
  • 5.4 Above1.83 mm

6 GLOBAL BEAD WIRE (TYRE BEAD WIRE) MARKET, BY APPLICATION

  • 6.1 Overview
  • 6.2 Radial Tire
  • 6.3 Bias Tire

7 GLOBAL BEAD WIRE (TYRE BEAD WIRE) MARKET, BY GEOGRAPHY

  • 7.1 Overview
  • 7.2 North America
    • 7.2.1 U.S.
    • 7.2.2 Canada
    • 7.2.3 Mexico
  • 7.3 Europe
    • 7.3.1 Germany
    • 7.3.2 U.K.
    • 7.3.3 France
    • 7.3.4 Rest of Europe
  • 7.4 Asia Pacific
    • 7.4.1 China
    • 7.4.2 Japan
    • 7.4.3 India
    • 7.4.4 Rest of Asia Pacific
  • 7.5 Rest of the World
    • 7.5.1 Latin America
    • 7.5.2 Middle East and Africa

8 GLOBAL BEAD WIRE (TYRE BEAD WIRE) MARKET COMPETITIVE LANDSCAPE

  • 8.1 Overview
  • 8.2 Company Market Ranking
  • 8.3 Key Development Strategies

9 COMPANY PROFILES

  • 9.1 Bekaert
    • 9.1.1 Overview
    • 9.1.2 Financial Performance
    • 9.1.3 Product Outlook
    • 9.1.4 Key Developments
  • 9.2 Kiswire
    • 9.2.1 Overview
    • 9.2.2 Financial Performance
    • 9.2.3 Product Outlook
    • 9.2.4 Key Developments
  • 9.3 Rajratan
    • 9.3.1 Overview
    • 9.3.2 Financial Performance
    • 9.3.3 Product Outlook
    • 9.3.4 Key Developments
  • 9.4 Heico Wire Group
    • 9.4.1 Overview
    • 9.4.2 Financial Performance
    • 9.4.3 Product Outlook
    • 9.4.4 Key Developments
  • 9.5 TATA Steel
    • 9.5.1 Overview
    • 9.5.2 Financial Performance
    • 9.5.3 Product Outlook
    • 9.5.4 Key Developments
  • 9.6 WireCo WorldGroup
    • 9.6.1 Overview
    • 9.6.2 Financial Performance
    • 9.6.3 Product Outlook
    • 9.6.4 Key Developments
  • 9.7 Shandong Daye
    • 9.7.1 Overview
    • 9.7.2 Financial Performance
    • 9.7.3 Product Outlook
    • 9.7.4 Key Development
  • 9.8 Xingda
    • 9.8.1 Overview
    • 9.8.2 Financial Performance
    • 9.8.3 Product Outlook
    • 9.8.4 Key Developments
  • 9.9 Snton
    • 9.9.1 Overview
    • 9.9.2 Financial Performance
    • 9.9.3 Product Outlook
    • 9.9.4 Key Developments
  • 9.10 Xinglun
    • 9.10.1 Overview
    • 9.10.2 Financial Performance
    • 9.10.3 Product Outlook
    • 9.10.4 Key Development

10 Appendix

  • 10.1 Related Research