市场调查报告书
商品编码
1146402
全球汽车液体冷凝器市场-2022-2029Global Automotive Liquid Condenser Market - 2022-2029 |
※ 本网页内容可能与最新版本有所差异。详细情况请与我们联繫。
汽车空调系统由许多部分组成。每个元素都起着一定的作用,并与其他元素相连。汽车空调系统的一个重要组成部分是液体冷凝器。使用冷凝器作为热交换器将高压气体转化为高压液体,然后流向储液干燥器和膨胀阀。
冷凝器具有在冷凝过程中降低製冷剂温度的功能。它成功地冷却了温暖的温度以产生一种冷液体,该液体将通过汽车空调的开口释放出来。此外,冷凝器将从压缩机产生的压缩氟利昂中吸收热量,将其从气体变为液体。
通常,此电容器位于散热器前部附近。从那个位置,不可避免地会有很多污垢进入汽车并污染冷凝器。汽车空调冷凝器中的冷凝水可能会被阻塞。由于其关键功能,汽车冷凝器需要额外注意。目的是消除在製动或低速行驶时带走车内热量的冷凝器洩漏。
液体冷凝器为蒸发器提供过冷液体,在通过製冷剂系统循环油的同时去除水分,以及其他好处。此外,它还是电池热控制的热源。
全球汽车工业的兴起以及年轻人对跑车的日益浓厚的兴趣,增加了用于汽车舒适驾驶的液体冷凝器的需求。
随着全球汽车工业的兴起和年轻人对跑车的兴趣日益浓厚,实现舒适驾驶的汽车对液体冷凝器的需求不断增加。
近几十年来,世界经历了巨大的经济增长。这种增长在中国、印度和亚太地区等新兴市场更为明显。多年的持续经济增长导致了快速的城市化和工业化。结果,一个庞大的中产阶级出现了,取得了良好的社会经济成果。
中产阶级可支配收入增加,对汽车等消费品的需求增加。随着自动化的引入,製造商能够以显着降低的价格提高产量。自动化质量控制和最少的人工干预确保了整个生产过程的高质量。汽车製造商已提高产量以满足中产阶级日益增长的需求。每家公司都推出了新的型号和功能,提供有吸引力的产品以获得市场份额。
由于汽车行业的需求增加和产量增加,液体电容器市场在预测期内有机会增长。随着二手车寿命的延长,汽车液体冷凝器的售后市场销售也有望增加,尤其是在北美市场。车用液体冷凝器製造商的目标是向世界供应高品质的产品。它还进行了大量的研究和开发,以满足消费者的需求并创造市场增长前景。
汽车电容器的高成本阻碍了市场增长
汽车液体冷凝器的维护成本相对较高,需要定期维护(每 6 个月检查和更换一次冷却水或製冷剂)。例如,汽车空调的液体冷凝器更换成本约为679美元,而美国汽车空调冷凝器的平均更换价格为585-773美元~900美元。
此外,如果冷凝器出现故障,汽车将难以实现理想的冷却或加热。更换冷却水或製冷剂会导致汽车冷凝器的维护成本很高。
汽车液体冷凝器的製造和安装成本因应用而异。汽车液体冷凝器比传统冷凝器更昂贵,因为由于製造成本高,它们可能需要额外的设备和高强度材料。因此,全球汽车电容器市场受到所有这些因素的负面影响。
COVID-19 影响分析
由于 COVID-19 的影响,2020 年全球汽车液体冷凝器市场暴跌。 2020 年 4 月上旬,世界各国政府实施了严格的封锁和其他限制措施,以遏制 COVID-19 的传播。汽车製造厂被迫关闭或大幅减少运营以遵守政府指令。
在 2020 年 9 月和 2020 年 10 月部分取消严格限制后,停工阻碍了继续生产,并为企业造成了代价高昂的停滞。与疫情前水平相比,生产继续放缓。
汽车製造商的需求暴跌对全球汽车液体电容器市场造成了严重破坏。新技术研发和新产品引进滞后。作为全球最大的汽车市场,中国在 2020 年 5 月相对较早地解除了封锁,因此全球需求在 2020 年底略有回升。然而,随着 2022 年初北美和欧洲爆发第二波疫情,全球需求依然疲软。到 2022 年底,全球需求预计将达到大流行前的水平。
製造业务和研发活动的减少和部分暂停严重影响了汽车液体电容器製造商在 2020 年第二和第三季度的收益。然而,随着封锁最终解除,产量在 2022 年上升到疫情前的水平,也有一线希望。
全球汽车液体冷凝器市场按类型、材料、车辆、销售渠道和地区进行细分。
高效的热交换器和大表面积提高了平行流汽车液体冷凝器的市场份额
全球汽车液体冷凝器市场细分为管翅式、单流、蛇形和平行流。在提到的汽车液体冷凝器类型中,平行流汽车液体冷凝器最近得到了普及。平行流冷凝器将装置分成多个部分或“通道”,以创建更有效的程序,将製冷剂从气体变为液体。这是一种非常有效的热交换器。
冷媒更换是通过定期将插头插入侧轨末端,迫使冷媒翻转 180 度来完成的。塞子越多,转动冷却液的频率就越高。製冷剂通常“通过”冷凝器 3-4 次。
另外,与传统冷凝器不同,平行流冷凝器由紧密挤在一起的小管组成,增加了冷凝器的表面积并提高了其冷却能力。
不断增长的汽车行业和政府支持政策刺激亚太地区的产品需求
预计亚太地区将在预测期内引领汽车液体电容器市场。中国和印度是市场扩张的主要动力。中国和印度是市场扩张的主要动力。该地区约占全球汽车产量的 60%,是全球人口比例最高的地区,在中国和印度两个人口稠密国家的推动下,预计将成为全球最大的汽车需求地区。
此外,政府法规和汽车行业的发展是推动该地区电容器增长的主要因素。此外,东盟国家较低的劳动力成本和经济生产条件也是当前增长的因素之一。
例如,印度政府已承诺在促进电动汽车的需求和接受度、鼓励联合研发工作以及促进必要基础设施建设方面发挥关键作用。此外,亚太地区的主要汽车製造商也是推动该产品市场的因素之一。该类别的主要参与者包括 Tata Motors Limited、Pranav Vikas、ESTRA 等。
汽车液体冷凝器的全球市场与主要的区域和全球参与者竞争激烈。为市场增长做出贡献的主要公司有电装、马勒熊、三电、摩丁、德尔福、塔塔汽车有限公司、Coyolado、Chaoli Hitech、Keihin Prana Bubicas 等。
领导者正在采取多种增长战略,例如产品发布、收购和合作伙伴关係,为全球汽车液体冷凝器市场的增长做出了贡献。
母马
概述 马勒已成长为汽车行业的国际开发合作伙伴和供应商,并且是未来移动出行的先驱。集团的产品组合解决了与内燃机、电动汽车动力系统和空调技术相关的所有重要挑战。集团的营业额约为 17 亿欧元,在全球 30 多个国家拥有 79,000 多名员工和 160 个生产基地。
产品组合 冷却模块 我们的冷却模块由多个发动机冷却组件和构成空调迴路一部分的冷凝器组成。所有部件都完美匹配以获得最佳性能。车辆设计理念将模块组合在一起,从而降低了开发、生产和物流成本。
全球汽车液体冷凝器市场报告提供大约 69 个市场数据表、63 个数字和 205 页的结构。
2022 年目标受众
Automotive Liquid Condenser Market reached US$ XX million in 2021 and is expected to record significant growth by reaching up to US$ XX million by 2029, growing at a CAGR of YY% during the forecast period (2022-2029).
Numerous parts make up an automobile's air conditioning system. Each element plays a certain role and is connected to the others. The liquid condenser is crucial to a car's air conditioning system. High-pressure gas is changed into a high-pressure liquid using the condenser as a heat exchanger before streaming to the receiver dryer and, finally, the expansion valve.
The condenser acts to lower the refrigerant's temperature when condensation is taking place. A cool liquid will be produced after the warm temperature is successfully cooled and released through the car air conditioner openings. Furthermore, the condenser will absorb heat from the compressed freon the compressor produces, turning it from a gas to a liquid.
Typically, this condenser is found near the radiator's front. The position makes it inevitable that much dirt will enter the vehicle and contaminate the condenser. Condensation can be hampered by dirt in the car air conditioner condenser. The automobile condenser does require additional care, given its crucial function. The goal is to eliminate any chance of condenser leakage, which would reduce cabin heat when braking or traveling at low speeds.
The liquid condenser offers various advantages, such as giving the evaporator liquid that has been subcooled and permitting oil to circulate in the refrigerant system while removing moisture. Furthermore, it also provides a heat source for the thermal control of the battery.
The rising automotive industry across the globe, coupled with the growing preference of the young population towards sports cars, boots the demand for automotive liquid condensers for better driving comfort.
The rising automotive industry across the globe, coupled with the growing preference of the young population towards sports cars, boots the demand for automotive liquid condensers for better driving comfort
The world has experienced significant economic growth in the last couple of decades. The growth is more pronounced in emerging markets such as China, India and the wider Asia-Pacific. Years of sustained economic growth have led to rapid urbanization and industrialization. It has created positive socio-economic outcomes that have led to the emergence of a large middle class.
The rising disposable incomes of the middle class have increased the demand for consumer products such as cars. The adoption of automation has allowed manufacturing industries to increase output while keeping prices low substantially. Automated quality control and minimal human intervention ensure high quality throughout production. In order to cater to the growing demand from the middle class, automotive manufacturers have ramped up production. Companies have introduced new models and features to create attractive offerings to capture market share.
The growing demand and rising automotive industry production have created opportunities for the liquid condensers market to grow in the forecast period. In addition, sales of automotive liquid condensers in the aftermarket are anticipated to increase, particularly in the North American market, as the used car lifespan increases. Worldwide distribution of high-quality automotive liquid condensers is a goal for manufacturers. In order to meet consumer needs, they also carry out considerable research and development efforts to create growth prospects for the market to grow.
The high cost of automotive condensers hurdles the market growth for the product
Automotive liquid condensers have a relatively high maintenance cost and require routine maintenance (every six months, the coolant or refrigerant must be inspected and replaced). For instance, Car A/C liquid condenser replacement cost about US$679, with average auto AC condenser replacement prices ranging from US$585 to $773 in U.S. In addition, the total price for the average car AC condenser cost is around US$400 to US$900, with the parts costing between US$500-US$700 and the labor ranging between US$200 to US$400.
Furthermore, faulty condensers make it difficult for an automobile to achieve the ideal level of cooling or heating. The replacement of coolants and refrigerants is the cause of the high maintenance costs of vehicle condensers.
An automotive liquid condenser's fabrication and installation costs vary depending on the application. Due to the higher manufacturing costs, automotive liquid condensers are more expensive than conventional ones since they may need additional equipment and high-strength materials. Thus, the automotive condenser market worldwide is negatively impacted by all these causes.
COVID-19 Impact Analysis
The global automotive liquid condenser market experienced sharp declines in 2020 owing to COVID-19's impact. Governments across the globe imposed strict lockdowns and other restrictions in early April 2020 to curb the spread of COVID-19. The automotive manufacturing facilities had to close or scale back operations significantly to comply with the government directives.
The lockdown hampered ongoing production and created a backlog that burdened companies when the strict restrictions were partially lifted in September and October 2020. Production continued at a slower pace when compared to pre-pandemic levels.
The collapse in demand from vehicle manufacturers caused a severe disruption in the global automotive liquid condenser market. The research and development of new technologies and the introduction of new products were delayed. China, the largest automotive market globally, emerged from lockdowns relatively early by May 2020 and global demand, therefore, showed a slight recovery by the end of 2020. However, the second pandemic wave hit North America and Europe in early 2022 and global demand remains subdued. Global demand is expected to reach pre-pandemic levels by the end of 2022.
The scaling back and a partial shutdown of manufacturing operations and research and developmental activities severely affected the revenues of automotive liquid condenser manufacturing companies in the second and third quarters of 2020. However, the eventual lifting of lockdowns and increasing production toward pre-pandemic levels showed encouraging signs in 2022.
The global automotive liquid condenser market is segmented by type, material, vehicle, sales channel and region.
Effective heat exchanger and larger surface area boosts the market share for parallel-flow automotive liquid condenser
The global automotive liquid condenser market is segmented into tubes & fins, single flow, serpentines and parallel flow. Out of the mentioned automotive liquid condenser type, parallel flow automotive liquid condenser has recently gained popularity. The parallel flow condenser divides the unit into parts or "passes," creating a more effective procedure for changing the refrigerant from gas to liquid. It is a very effective heat exchanger.
The exchange is accomplished by forcing the refrigerant to reverse directions by 180° at the end of the side rails by inserting a plug within the rail at regular intervals. The refrigerant will shift direction more frequently the more plugs there are. The refrigerant typically "passes" through the condenser three to four times.
Furthermore, In contrast to conventional condensers, parallel flow condensers have a row of tiny tubes arranged closely together and have an interior diameter of roughly the size of a pin head, increasing the condenser's surface area and boosting its cooling capacity.
The growing automotive industry and supportive government policies escalate the product demand in Asia-Pacific
Asia-Pacific is expected to lead the automotive liquid condenser market in the forecast period. China and India are mostly responsible for the market expansion. China and India are mostly responsible for the market expansion. With around 60% of the world's vehicles, the region's automobile demand will be the largest globally, owing to the world's highest population proportion and two densely populated nations, China and India.
Moreover, favorable government regulations and the escalating automotive industry are major factors driving this region's condenser' growth aftermarket. In addition, low labor costs and economic production conditions in ASEAN countries are also among a few reasons behind the aftermarket's current growth.
For instance, The Indian government has committed to play a key role in promoting EV demand and acceptance, encouraging collaborative R&D efforts and facilitating the construction of necessary infrastructure. Furthermore, key regional autotmotive players are another market driving factor for the product in Asia-Pacific. The key players under the category include Tata Motors Limited, Pranav Vikas, ESTRA and others.
The global automotive liquid condenser market is highly competitive with local and global key players. Key players contributing to the market's growth are Denso, Mahle-Behr, Sanden, Modine, Delphi, Tata Motors Limited, Koyorad, Chaoli Hi-Tech and Keihin Pranav Vikas, among others.
The major companies are adopting several growth strategies, such as product launches, acquisitions and collaborations, contributing to the global growth of the automotive liquid condenser market.
MAHLE
Overview: MAHLE is a growing international development partner and supplier to the automotive industry and a pioneer for future mobility. The group's product portfolio addresses all the crucial issues relating to the powertrain and air conditioning technology for drives with combustion engines and e-mobility. The group generated approximately EUR 1.7 billion in sales with more than 79,000 employees and is represented in over 30 countries with 160 production locations globally.
Product Portfolio: Cooling modules: Cooling modules offered by the company comprises multiple engine cooling components and the condenser, which forms part of the air conditioning circuit. All parts are perfectly matched for optimum performance. The modules are put together by the vehicle design concept, which lowers the costs of development, production and logistics.
The global automotive liquid condenser market report would provide approximately 69 market data tables,63 figures and 205 pages.
Target Audience 2022
LIST NOT EXHAUSTIVE