查看购物车
  • Traditional Chinese
  • English
  • Japanese
  • Korean
封面
市场调查报告书
商品编码
1636109

北美叶轮：市场占有率分析、行业趋势和成长预测（2025-2030）

North America Rotor Blade - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2025 - 2030)
出版日期: | 出版商: Mordor Intelligence | 英文 110 Pages | 商品交期: 2-3个工作天内

价格

※ 本网页内容可能与最新版本有所差异。详细情况请与我们联繫。

简介目录

预计北美叶轮市场在预测期内复合年增长率将超过 6%

北美转子叶片-市场-IMG1

主要亮点

  • 2020 年市场受到 COVID-19 的负面影响。目前，市场已达到疫情前水准。从长远来看，政府的支持措施和私人投资将推动该国对叶轮的需求。
  • 另一方面，高昂的相关运输成本以及来自太阳能和水力发电等替代清洁能源的成本竞争有可能阻碍市场成长。
  • 产品创新和最新叶轮技术的采用预计很快就会为叶轮市场创造利润丰厚的成长机会。由于对风力发电的需求不断增加，美国预计将主导风力发电机叶轮市场。

北美叶轮市场趋势

土地领域主导市场

  • 陆域风电技术在过去五年中不断发展，以最大限度地提高每兆瓦装置容量的发电量，并覆盖更多风速较低的地区。除此之外，近年来风力发电机变得越来越大，轮毂更高，直径更宽，风力发电机叶片也更大。
  • 根据国际可再生能源机构（IRENA）预测，2022年北美陆上风电装置容量预计为163.42兆瓦，较2021年成长约5.9%。
  • 此外，根据国际能源总署（IEA）的数据，平准化能源成本（LCOE）和全球加权平均总资本支出将从2016年的76.1美元/兆瓦时和1,730.5美元/兆瓦时增至2021年的48.2美元/兆瓦时及1,396.3美元减少至美元/兆瓦时。此外，到 2025 年，LCOE 和平均加权资本支出预计将分别降至 44.6 美元/MWh 和 1,338.2 美元/MWh。
  • 加拿大拥有北美第二大风力发电装置容量，2022年总设备容量为1529千万瓦。 2021年，风力发电容量新增约991MW。
  • 截至2021年，加拿大陆域风电总合装置容量排名全球第八，约占全球陆上风电装置容量的2%。根据加拿大可再生能源协会（CREA）统计，加拿大有317个发电工程。此外，未来五年内还计划建造约 31 个陆上和离岸风力发电计划。
  • 2021年，风力发电占加拿大总发电量的比例达5.86%，高于2015年的4.21%。发展趋势不仅体现在风电领域投资增加，而且风电场规模不断扩大。在该国，超过1.5兆瓦的大型风电厂数量正在增加，例如截至2022年在建的Grizzly Bear Creek风发电工程（152兆瓦）和Wild Rose 2风发电工程（192兆瓦） 。大型风电场预计需要更高、更高容量的风力发电机。因此，预计在预测期内对叶轮的需求将会增加。
  • 因此，由于上述因素，由于LCOE较低和资本支出减少，加上清洁能源来源带来的高能源需求，陆上风力发电机的叶轮预计在预测期内增长。

美国主导市场

  • 近年来，美国风力发电显着成长。风力发电技术的进步正在降低风力发电的成本。美国和其他国家针对可再生能源的各种政府法规和财政奖励正在促进大规模风电的成长。
  • 美国的大规模风能产业透过旨在提高国内能源生产的「美国优先」倡议得到了政府的大力支持。由于该国拥有广泛的沿海租赁地区，离岸风力发电领域被认为是重要的发展领域。
  • 根据国际可再生能源机构（IRENA）的数据，风力发电市场的总设备容量显着增加。 2022年美国风电装置容量为14,082万千瓦，较2021年成长约5.9%。
  • 此外，2021 年 12 月，美国国家可再生能源实验室 (NREL) 的研究人员将可回收热塑性塑胶与积层製造（称为3D[3D] 列印）相结合，製造出了先进的风力发电机叶片。这项进展得到了美国能源局先进製造办公室的资助，该办公室旨在刺激创新，提高美国製造业的能源生产率，并使尖端产品的製造能够在美国实现。
  • 2022年9月，拜登-哈里斯政府宣布，各国政府将开始采取协调行动，开发新的浮体式海上风电平台。该国总统拜登设定了到 2030 年安装 30 吉瓦 (GW) 离岸风电的目标。
  • 因此，预测期内风力发电机叶轮的需求预计将增加，这主要是由于已规划和规划的离岸风发电工程数量的增加。

北美叶轮产业概况

北美风力发电机叶轮市场较为分散。市场上的主要企业包括（排名不分先后）TPI Composites SA、LM Wind Power（GE 再生能源业务）、Siemens Gamesa Renewable Energy, SA、Vestas Wind Systems A/S 和 Enercon GmbH。

其他好处

  • Excel 格式的市场预测 (ME) 表
  • 3 个月分析师支持

目录

第一章简介

  • 调查范围
  • 市场定义
  • 研究场所

第 2 章执行摘要

第三章调查方法

第四章市场概况

  • 介绍
  • 至2028年市场规模及需求预测（单位：十亿美元）
  • 最新趋势和发展
  • 政府法规和措施
  • 市场动态
    • 促进因素
    • 抑制因素
  • 供应链分析
  • 波特五力分析
    • 供应商的议价能力
    • 消费者议价能力
    • 新进入者的威胁
    • 替代品的威胁
    • 竞争公司之间敌对关係的强度

第五章市场区隔

  • 部署地点
    • 陆上
    • 离岸
  • 刀片材质
    • 碳纤维
    • 玻璃纤维
    • 其他刀片材料
  • 地区
    • 美国
    • 加拿大
    • 墨西哥

第六章 竞争状况

  • 併购、合资、联盟、协议
  • 主要企业策略
  • 公司简介
    • TPI Composites Inc.
    • LM Wind Power（GE 再生能源业务）
    • Nordex SE
    • Siemens Gamesa Renewable Energy, SA
    • Vestas Wind Systems A/S
    • MFG Wind
    • Sinoma wind power blade Co. Ltd
    • Aeris Energy
    • Enercon GmbH

第七章 市场机会及未来趋势

简介目录
Product Code: 5000051

The North America Rotor Blade Market is expected to register a CAGR of greater than 6% during the forecast period.

North America Rotor Blade - Market - IMG1

Key Highlights

  • The market was negatively impacted by COVID-19 in 2020. Currently, the market has reached pre-pandemic levels. Over the long term, supportive government policies and private investments drive the country's rotor blade demand.
  • On the flip side, the associated high cost of transportation and cost competitiveness of alternate clean power sources, like solar power, hydropower, etc., have the potential to hinder the market's growth.
  • Nevertheless, product innovation and adaptation of the latest rotor blade technologies are expected to create soon lucrative growth opportunities for the France rotor blade market. The United States is expected to dominate the wind turbine rotor blade market, with the increasing demand for wind energy in the country.

North America Rotor Blade Market Trends

Onshore Segment to Dominate the Market

  • Onshore wind energy power generation technology has evolved over the last five years to maximize electricity produced per megawatt capacity installed and to cover more sites with lower wind speeds. Besides this, in recent years, wind turbines have become larger with taller hub heights, broader diameters, and larger wind turbine blades.
  • According to the International Renewable Energy Agency (IRENA), in 2022, the North American onshore wind turbine capacity additions registered to be 163.42 GW, an increase of around 5.9% as compared to 2021.
  • Moreover, according to the International Energy Agency (IEA), the levelized cost of energy (LCOE) and global weighted average total CAPEX decreased from 76.1 USD/MWh and 1730.5 USD/MWh in 2016 to 48.2 USD/MWh and 1396.3 USD/MWh in 2021. In addition, the LCOE and average weighted CAPEX are expected to decrease to 44.6 USD/MWh and 1338.2 USD/MWh, respectively, by 2025.
  • Canada holds North America's second-largest installed wind power capacity, with a total installed capacity of 15.29 GW in 2022. The country increased its installed wind power capacity by around 991 MW in 2021.
  • As of 2021, Canada ranked eighth in the globe in terms of total onshore installed capacity, around 2% of the world's onshore wind capacity. According to the Canadian Renewable Energy Association (CREA), Canada has 317 wind energy projects producing power. Additionally, around 31 onshore and offshore wind power projects are planned for five years.
  • In 2021, the share of wind energy in the total electricity generation in Canada amounted to 5.86%, which grew as compared to 4.21% in 2015. The development trends indicate not only the increasing investments in the wind sector but also that the size of wind farms is growing. The country is witnessing an increasing number of large wind farms with more than 1.5 MW capacity, such as the Grizzly Bear Creek Wind Project (152 MW) and Wild Rose 2 Wind Project (192 MW) under construction as of 2022. Large-size wind farms are expected to require taller and higher-capacity wind turbines. Hence, the demand for rotor blades is expected to increase during the forecast period
  • Therefore, based on the above-mentioned factors, the onshore wind turbine rotor blade is expected to grow due to declining LCOE and reduced CAPEX, coupled with high energy demand through clean sources, during the forecast period.

United States to Dominate the Market

  • Wind power generation in the United States has grown significantly in recent years. Advances in wind energy technology have decreased the cost of producing electricity from wind. Various Government regulations and financial incentives for renewable energy in the United States and other countries have contributed to growth in large-scale wind power generation.
  • The large-scale wind power sector in the United States is receiving immense support from the government due to the America First policy, which aims to boost domestic energy production. The offshore wind power sector is considered a significant development area, as the country has a large coastal area for leasing.
  • According to the International Renewable Energy Agency (IRENA), the wind energy market witnessed a significant rise in the total installed wind power capacity. In 2022, the United States wind turbine capacity additions was140.82 GW, an increase of around 5.9% compared to 2021.
  • Furthermore, in December 2021, National Renewable Energy Laboratory (NREL) researchers conducted research on a combination of recyclable thermoplastics and additive manufacturing (better known as three-dimensional [3D] printing) to manufacture advanced wind turbine blades. The advance was made possible by funding from the US Department of Energy's Advanced Manufacturing Office-awards designed to stimulate technology innovation, improve the energy productivity of American manufacturing, and enable the manufacturing of cutting-edge products in the United States.
  • In September 2022, the Biden-Harris Administration announced that the country's government was launching coordinated actions to develop new floating offshore wind platforms. The country's president, Joe Biden, set a target of deploying 30 gigawatts (GW) offshore wind by 2030.
  • Hence, with the number of wind power projects planned and in the pipeline, majorly in offshore locations, the demand for wind turbine rotor blades is expected to increase during the forecast period.

North America Rotor Blade Industry Overview

The North American wind turbine rotor blade market is fragmented in nature. Some of the major players in the market (in no particular order) include TPI Composites SA, LM Wind Power (a GE Renewable Energy business), Siemens Gamesa Renewable Energy, S.A., Vestas Wind Systems A/S, and Enercon GmbH., among others.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

  • 1.1 Scope of the Study
  • 1.2 Market Definition
  • 1.3 Study Assumptions

2 EXECUTIVE SUMMARY

3 RESEARCH METHODOLOGY

4 MARKET OVERVIEW

  • 4.1 Introduction
  • 4.2 Market Size and Demand Forecast in USD billion, till 2028
  • 4.3 Recent Trends and Developments
  • 4.4 Government Policies and Regulations
  • 4.5 Market Dynamics
    • 4.5.1 Drivers
    • 4.5.2 Restraints
  • 4.6 Supply Chain Analysis
  • 4.7 Porter's Five Forces Analysis
    • 4.7.1 Bargaining Power of Suppliers
    • 4.7.2 Bargaining Power of Consumers
    • 4.7.3 Threat of New Entrants
    • 4.7.4 Threat of Substitute Products and Services
    • 4.7.5 Intensity of Competitive Rivalry

5 MARKET SEGMENTATION

  • 5.1 Location of Deployment
    • 5.1.1 Onshore
    • 5.1.2 Offshore
  • 5.2 Blade Material
    • 5.2.1 Carbon Fiber
    • 5.2.2 Glass Fiber
    • 5.2.3 Other Blade Materials
  • 5.3 Geography
    • 5.3.1 United States
    • 5.3.2 Canada
    • 5.3.3 Mexico

6 COMPETITIVE LANDSCAPE

  • 6.1 Mergers and Acquisitions, Joint Ventures, Collaborations, and Agreements
  • 6.2 Strategies Adopted by Leading Players
  • 6.3 Company Profiles
    • 6.3.1 TPI Composites Inc.
    • 6.3.2 LM Wind Power (a GE Renewable Energy business)
    • 6.3.3 Nordex SE
    • 6.3.4 Siemens Gamesa Renewable Energy, S.A.
    • 6.3.5 Vestas Wind Systems A/S
    • 6.3.6 MFG Wind
    • 6.3.7 Sinoma wind power blade Co. Ltd
    • 6.3.8 Aeris Energy
    • 6.3.9 Enercon GmbH

7 MARKET OPPORTUNITIES AND FUTURE TRENDS