查看购物车
  • Traditional Chinese
  • English
  • Japanese
封面
市场调查报告书
商品编码
1851574

石英晶体振盪器：市场份额分析、行业趋势、统计数据和成长预测（2025-2030 年）

Quartz Crystal Oscillators - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2025 - 2030)
出版日期: | 出版商: Mordor Intelligence | 英文 120 Pages | 商品交期: 2-3个工作天内

价格

※ 本网页内容可能与最新版本有所差异。详细情况请与我们联繫。

简介目录

预计到 2025 年，石英晶体振盪器市场收入将达到 14.8 亿美元，到 2030 年将达到 17.6 亿美元。

由于智慧型手机、5G 基地台和低地球轨道卫星等对精确授时解决方案的需求不断增长，复合年增长率保持在 3.53% 的稳定水准。

石英晶体振盪器-市场-IMG1

在相位杂讯、功耗和启动时间方面，石英晶体持续优于其他竞争技术。亚太地区半导体晶圆厂的扩张、汽车电气化的加速以及超大规模资料中心向400/800G光链路的迁移是推动其发展的主要因素。同时，高纯度石英晶体的供应链衝击以及来自微机电振盪器的竞争虽然减缓了其发展速度，但并未在高精度细分市场取代现有技术。

全球石英晶体振盪器市场趋势及洞察

5G基地台的普及将增加对高度稳定定时的需求。

ITU-T G.8272.1 等规范规定了 ±30 ns 的精度限制，而像 Rakon 这样的供应商正在研发小型化的 OCXO，使其能够在 GNSS 讯号遗失时保持工作。在密集的城市环境中，每个小型基地台节点现在都整合了自己的高精度光源，随着仅使用宏基地台的部署方式逐渐被分散式天线系统取代，对高精度光源的需求也日益增长。像 Oscilloscope OSA 5430 这样的架构将光原子参考整合到面向未来的 5G 定时架构中，进一步凸显了石英晶体的重要性，因为在皮秒级抖动容差至关重要的应用中，石英晶体尤为重要。

ADAS 和自动驾驶电子设备需要低抖动时钟来源

L3级自动驾驶增加了感测器融合和即时运算的负载，这些负载必须满足汽车乙太网路亚奈秒的反应时间要求。 Skyworks和SiTime的低抖动振盪器符合AEC-Q100和ISO 26262标准，能够承受超过20g的振动峰值，并在常运作模式下达到低于1µW的功耗。 TDK预测电动车产量将成长27%，这意味着随着区域ECU取代分散式架构，每个底盘的定时节点数量也将随之增加。 PCIe连接的集中式处理器需要RMS相位杂讯低于100fs的时脉源。

基于MEMS的硅振盪器的出现将淘汰入门级SPXO。

SiTime及其几家竞争对手目前已开始出货可编程MEMS时钟，这些时钟能够承受50,000g的衝击，并在125 度C的高温下工作。销售量正蓬勃发展，SiTime累计2024年营收将达到1.44亿美元，比过去十年增长七倍，这表明此类产品在对成本敏感的设计中得到了广泛应用。然而，高性能石英晶体振盪器市场仍以具有0.18 ps rms相位杂讯、3 mA电源电流和低于100 μs启动时间的晶体为主。

细分市场分析

到2024年，SPXO将占石英晶体振盪器市场份额的36.9%，这反映出其在大众电子产品中的广泛应用。随着5G无线网路、工业4.0网关和ADAS模组等产品将热稳定性置于物料清单成本之上，TCXO预计将以每年4.2%的速度成长。 VCXO在光连接模组占有一席之地，其市场规模需求与56Gbps以上锁相环的精度直接相关。

随着亚ppb级稳定性从核心网路转移到边缘节点， NDK、 Epson和Racon等公司正竞相降低OCXO的功耗。 Epson的OG7050CAN比传统装置体积缩小85%，功耗降低56%，为OCXO渗透到机架式基频单元铺平了道路。同时，FCXO架构正在量子电脑测试平台中涌现，这些平台需要10⁻¹⁴的短期稳定性，而标准元件无法达到这项要求。由此导致的结果是，市场仍保持分散状态，同时专业供应商也获得了可观的利润。

随着智慧型手机、穿戴式装置和物联网感测器寻求与自动拾取放置线相容的回流焊接元件，表面黏着技术封装将在 2024 年占收入的 81.7%。大型真空 0.5 毫米高的 SPXO 是体积效率的产业标竿。

由于国防航空电子设备和严苛环境机械设备更倾向于使用通孔元件，以取代能够承受反覆热循环的插座式元件，通孔元件的复合年增长率持续维持在3.7%。大型振盪器（也包括高端OCXO所必需的加热控制腔）虽然市占率较小，但盈利丰厚。供应商之间的差异化如今主要体现在电镀化学和无铅可焊性上，这些参数能够保护汽车和铁路号誌系统等设计寿命超过15年的应用市场。

石英晶体振盪器市场报告按电路类型（简单封装晶体振盪器 (SPXO)、温度补偿晶体振盪器 (TCXO) 及其他）、安装类型（表面黏着技术及其他）、晶体切割方式（AT切割及其他）、最终用户（家用电子电器、通讯与网路及其他）和地区进行细分。市场预测以美元计价。

区域分析

到2024年，亚太地区将占全球营收的45.6%，其中中国、日本和韩国的晶片产量占全球70%以上，也是全球顶级振盪器製造商的所在地。 SEMI预测，2025年该地区的晶圆开工量将成长7%，从而带动测试测量台和光刻机上时序元件的普及。 NDK和Epson等传统日本供应商凭藉其本地石英矿和垂直整合的工厂，继续保持亚皮秒级抖动性能的领先地位。

北美正受惠于超大规模资料中心的建设和蓬勃发展的航太业。 RTX公司预计2024年营收将达到807亿美元，为国防计画提供支持，这些计画要求为飞弹导引和安全通讯有效载荷提供抗辐射石英晶体振盪器。儘管宏观经济成长放缓，但德国的工业4.0措施和法国製造业的復兴仍在推动成长。

中东目前市场份额较小，但随着阿联酋和沙乌地阿拉伯的营运商加快5G和智慧城市网路建设，预计到2030年，该地区将以3.9%的复合年增长率成为成长最快的地区。国家多元化将推动半导体组装计画的发展，并增加分离式时序元件的需求。拉丁美洲和非洲在5G普及方面相对滞后，因为4G仍占据主导地位，且电子产品生产能力有限。但小型基地台的密集化和物联网农业试点计画表明，石英晶体振盪器市场的需求正在成长，这将支撑全球石英晶体振盪器市场的销售成长。

其他福利：

  • Excel格式的市场预测（ME）表
  • 3个月的分析师支持

目录

第一章 引言

  • 研究假设和市场定义
  • 调查范围

第二章调查方法

第三章执行摘要

第四章 市场情势

  • 市场概览
  • 市场驱动因素
    • 5G基地台的普及将增加对高度稳定定时的需求。
    • ADAS 和自动驾驶电子设备需要低抖动时钟来源
    • 穿戴式装置小型化趋势推动了SMD和μ-Package晶体硅的采用。
    • 工业4.0在棕地工厂的实施推动了工业级TCXO的应用
    • 卫星卫星群将OCXO部署扩展到低地球轨道有效载荷
    • 资料中心光连接模组向 400/800G 迁移推动低相位杂讯 VCXO 的发展
  • 市场限制
    • 基于MEMS的硅振盪器的出现将淘汰入门级SPXO。
    • 高纯度合成石英供应链的价格波动
    • 设计週期超过3-5年会限制供应商的快速更换。
    • 战略航太零件出口管制
  • 产业生态系分析
  • 技术展望
  • 波特五力分析
    • 供应商的议价能力
    • 买方的议价能力
    • 新进入者的威胁
    • 替代品的威胁
    • 竞争的激烈程度

第五章 市场规模与成长预测

  • 依电路类型
    • 简易封装晶体振盪器（SPXO）
    • 温度补偿晶体振盪器（TCXO）
    • 电压调节器晶体振盪器（VCXO）
    • 频率控制晶体振盪器（FCXO）
    • 恆温晶体振盪器（OCXO）
    • 其他电路类型
  • 按安装类型
    • 表面贴装
    • 通孔
  • 水晶切割
    • AT 切割
    • BT Cut
    • SC 切割
  • 最终用户
    • 消费性电子产品
    • 电讯和网路
    • 工业自动化和物联网
    • 汽车（ADAS、资讯娱乐系统、电动车动力传动系统）
    • 航太/国防
    • 医疗和保健设备
    • 其他的
  • 按地区
    • 北美洲
      • 美国
      • 加拿大
      • 墨西哥
    • 欧洲
      • 德国
      • 英国
      • 法国
      • 北欧国家
      • 其他欧洲地区
    • 南美洲
      • 巴西
      • 南美洲其他地区
    • 亚太地区
      • 中国
      • 日本
      • 印度
      • 东南亚
      • 亚太其他地区
    • 中东和非洲
      • 中东
      • GCC
      • 土耳其
      • 其他中东地区
      • 非洲
      • 南非
      • 其他非洲地区

第六章 竞争情势

  • 市场集中度
  • 策略趋势
  • 市占率分析
  • 公司简介
    • Nihon Dempa Kogyo Co., Ltd.（NDK）
    • Epson Device Corporation
    • Daishinku Corp.（KDS）
    • Murata Manufacturing Co., Ltd.
    • Microchip Technology Inc.（Microsemi/Vectron）
    • TXC Corporation
    • Rakon Ltd.
    • SiTime Corporation
    • Epson Toyocom
    • River Eletec Corp.
    • Siward Crystal Technology
    • Hosonic Electronic Co., Ltd.
    • CTS Corporation
    • NDK Quartz（Asia）
    • Bliley Technologies
    • KYOCERA Crystal Device
    • Integral Petrovsky Plant
    • Fortune Semiconductor
    • ICM（International Crystal Mfg.）
    • Euroquartz Ltd.

第七章 市场机会与未来展望

简介目录
Product Code: 58807

Quartz crystal oscillators market size revenue reached USD 1.48 billion in 2025 and is forecast to climb to USD 1.76 billion by 2030, reflecting a steady 3.53% CAGR as demand for precise timing solutions spreads from smartphones to 5G base-stations and low-earth-orbit satellites.

Quartz Crystal Oscillators - Market - IMG1

The measured growth underscores a maturing yet resilient landscape in which quartz continues to outperform rival technologies on phase-noise, power consumption and start-up time. Expansion of semiconductor fabs in Asia-Pacific, accelerated electrification of vehicles, and migration of hyperscale data-centres to 400/800 G optical links are the principal catalysts. At the same time, supply-chain shocks in high-purity quartz and mounting competition from MEMS oscillators moderate the trajectory yet fail to displace the incumbent technology in high-precision niches.

Global Quartz Crystal Oscillators Market Trends and Insights

Proliferation of 5G Base-Stations Elevating High-Stability Timing Demand

The shift from 4G frequency-only synchronisation to 5G's time-division-duplex architecture imposes UTC-traceable phase accuracy within +-1.5 µs, compelling operators to deploy ePRTC-grade OCXOs and TCXOs in radio heads and grandmasters.Specifications such as ITU-T G.8272.1 prescribe +-30 ns limits, encouraging vendors like Rakon to miniaturise OCXOs able to holdover during GNSS loss. Each small-cell node in dense urban layouts now embeds its own precision source, multiplying unit demand as macro-only roll-outs give way to distributed antenna systems. Solutions such as Oscilloquartz OSA 5430 integrate optical atomic references to future-proof 5G timing architectures, reinforcing quartz relevance where picosecond-level jitter tolerance is mandatory.

ADAS and Autonomous Driving Electronics Requiring Low-Jitter Clock Sources

Level-3 autonomy increases sensor fusion and real-time compute loads that must align to sub-ns windows over automotive Ethernet. Skyworks and SiTime have qualified low-jitter oscillators to AEC-Q100 and ISO 26262 standards, delivering power budgets below 1 µW for always-on domains while surviving vibration peaks above 20 g. TDK forecasts 27% electric-vehicle production growth, implying a parallel expansion in timing nodes per chassis as zonal ECUs replace distributed architectures. Centralised processors linked by PCIe demand clock sources with RMS phase-noise under 100 fs, a threshold still favouring quartz in high-reliability settings.

Emergence of MEMS-Based Silicon Oscillators Cannibalising Entry-Level SPXO

SiTime and a handful of rivals now ship programmable MEMS clocks that withstand 50,000 g shocks and operate up to 125 °C, benefits that resonate in smart-phones, action cameras and industrial IoT . Unit absorption escalated after SiTime posted USD 144 million revenue in 2024, up seven-fold in a decade, indicating broad acceptance in cost-sensitive designs. Yet quartz retains supremacy where 0.18 ps rms phase-noise, 3 mA supply current and sub-100 µs start-up dominate the specification sheet, sustaining the Quartz crystal oscillators market at the high-performance end.

Other drivers and restraints analyzed in the detailed report include:

  1. Miniaturisation Trend in Wearables Fuelling µ-Package XTAL Adoption
  2. Industry-4.0 Retro-fits in Brown-Field Plants Boosting Industrial-Grade TCXO Uptake
  3. Price Volatility in High-Purity Synthetic Quartz Supply Chain

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

SPXOs held 36.9% of the Quartz crystal oscillators market in 2024, reflecting their ubiquity in mass-market electronics. TCXOs, while accounting for a smaller slice today, are projected to expand 4.2% annually as 5G radios, Industry 4.0 gateways and ADAS modules place thermal-stability above BOM cost. VCXOs uphold a niche in optical interconnects where the Quartz crystal oscillators market size requirement ties directly to phase-locked loop accuracy at 56 Gbps and above.

NDK, Epson and Rakon race to shrink power draw in OCXOs so that sub-ppb stability migrates from core networks to edge nodes. Epson's OG7050CAN, 85% smaller than legacy devices yet delivering 56% lower power, signals a pathway for OCXO penetration into rack-mounted base-band units . Meanwhile, FCXO architectures surface in quantum-computing testbeds that demand 10-14 short-term stability unattainable by standard cuts. The resulting mix preserves the fragmented character of the Quartz crystal oscillators market while enabling specialist suppliers to capture outsized margins.

Surface-mount packages accounted for 81.7% revenue in 2024 as smartphones, wearables and IoT sensors pursue reflow-solderable components compatible with automated pick-and-place lines. The Quartz crystal oscillators market continues shifting toward chip-scale and µ-package footprints, with Daishinku's 0.5 mm-high SPXOs setting industry benchmarks in volumetric efficiency.

Through-hole formats still chart a 3.7% CAGR because defense avionics and harsh-environment machinery favour socketed replacements that survive repeated thermal cycling. Large-body oscillators also host heater-regulated chambers indispensable for high-end OCXOs, sustaining a profitable if narrow segment. Supplier differentiation now hinges on plating chemistry and lead-free solderability, parameters that protect installed bases across automotive and rail signalling where design lifecycles exceed 15 years.

The Quartz Crystal Oscillator Market Report is Segmented Into Circuit Type (Simple Packaged Crystal Oscillator (SPXO), Temperature-Compensated Crystal Oscillator (TCXO), and More), Mounting Type (Surface Mount, and More), Crystal Cut (AT-Cut and More), End-User (Consumer Electronics, Telecom and Networking and More), and Geography. The Market Forecasts are Provided in Terms of Value (USD).

Geography Analysis

Asia-Pacific commanded 45.6% of 2024 revenue as China, Japan and South Korea manufactured more than 70% of global chips and housed tier-one oscillator makers. SEMI projects wafer starts in the region to climb 7% in 2025, translating into incremental pull-through for timing devices across test-and-measurement benches and lithography steppers. Japan's heritage suppliers such as NDK and Epson exploit local quartz mines and vertically integrated fabs to retain leadership in sub-pS jitter performance.

North America benefits from hyperscale data-centre build-outs and a vibrant aerospace sector. RTX recorded USD 80.7 billion sales in 2024, underlining defense programmes that specify rad-hard quartz oscillators in missile guidance and secure communication payloads. Europe advances industrial-automation and electric-vehicle ecosystems that favour TCXO deployments for deterministic networking; Germany's Industry 4.0 initiatives and France's manufacturing revitalisation create tailwinds despite macroeconomic slowdowns.

The Middle East, while currently holding a modest slice, registers the fastest 3.9% CAGR to 2030 as operators in the United Arab Emirates and Saudi Arabia fast-track 5G and smart-city grids. National diversification drives semiconductor assembly programmes that in turn consume discrete timing parts. Latin America and Africa lag broader adoption because 4G still predominates and electronics production remains limited, yet small-cell densification and IoT agriculture pilots hint at incremental demand that sustains global volume growth within the Quartz crystal oscillators market.

  1. Nihon Dempa Kogyo Co., Ltd. (NDK)
  2. Epson Device Corporation
  3. Daishinku Corp. (KDS)
  4. Murata Manufacturing Co., Ltd.
  5. Microchip Technology Inc. (Microsemi/Vectron)
  6. TXC Corporation
  7. Rakon Ltd.
  8. SiTime Corporation
  9. Epson Toyocom
  10. River Eletec Corp.
  11. Siward Crystal Technology
  12. Hosonic Electronic Co., Ltd.
  13. CTS Corporation
  14. NDK Quartz (Asia)
  15. Bliley Technologies
  16. KYOCERA Crystal Device
  17. Integral Petrovsky Plant
  18. Fortune Semiconductor
  19. ICM (International Crystal Mfg.)
  20. Euroquartz Ltd.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

  • 1.1 Study Assumptions and Market Definition
  • 1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET LANDSCAPE

  • 4.1 Market Overview
  • 4.2 Market Drivers
    • 4.2.1 Proliferation of 5G Base-Stations Elevating High-Stability Timing Demand
    • 4.2.2 ADAS and Autonomous Driving Electronics Requiring Low-Jitter Clock Sources
    • 4.2.3 Miniaturisation Trend in Wearables Fueling SMD and µ-Package XTAL Adoption
    • 4.2.4 Industry-4.0 Retro-fits in Brown-Field Plants Boosting Industrial-Grade TCXO Uptake
    • 4.2.5 Satellite Mega-Constellations Expanding OCXO Deployment in LEO Payloads
    • 4.2.6 Data-Centre Optical Interconnect Migration to 400/800 G Driving Low-Phase-Noise VCXO
  • 4.3 Market Restraints
    • 4.3.1 Emergence of MEMS-Based Silicon Oscillators Cannibalising Entry-Level SPXO
    • 4.3.2 Price Volatility in High-Purity Synthetic Quartz Supply Chain
    • 4.3.3 Design-in Cycles Exceeding 3-5 Years Limiting Rapid Vendor Switching
    • 4.3.4 Regulatory Export Controls on Strategic Aerospace Components
  • 4.4 Industry Eco System Analysis
  • 4.5 Technological Outlook
  • 4.6 Porter's Five Forces Analysis
    • 4.6.1 Bargaining Power of Suppliers
    • 4.6.2 Bargaining Power of Buyers
    • 4.6.3 Threat of New Entrants
    • 4.6.4 Threat of Substitutes
    • 4.6.5 Intensity of Rivalry

5 MARKET SIZE AND GROWTH FORECASTS (VALUES)

  • 5.1 By Circuit Type
    • 5.1.1 Simple Packaged Crystal Oscillator (SPXO)
    • 5.1.2 Temperature-Compensated Crystal Oscillator (TCXO)
    • 5.1.3 Voltage-Controlled Crystal Oscillator (VCXO)
    • 5.1.4 Frequency-Controlled Crystal Oscillator (FCXO)
    • 5.1.5 Oven-Controlled Crystal Oscillator (OCXO)
    • 5.1.6 Other Circuit Types
  • 5.2 By Mounting Type
    • 5.2.1 Surface-Mount
    • 5.2.2 Thru-Hole
  • 5.3 By Crystal Cut
    • 5.3.1 AT-Cut
    • 5.3.2 BT-Cut
    • 5.3.3 SC-Cut
  • 5.4 By End-User
    • 5.4.1 Consumer Electronics
    • 5.4.2 Telecom and Networking
    • 5.4.3 Industrial Automation and IoT
    • 5.4.4 Automotive (ADAS, Infotainment, EV Powertrain)
    • 5.4.5 Aerospace and Defense
    • 5.4.6 Medical and Healthcare Devices
    • 5.4.7 Others
  • 5.5 By Geography
    • 5.5.1 North America
      • 5.5.1.1 United States
      • 5.5.1.2 Canada
      • 5.5.1.3 Mexico
    • 5.5.2 Europe
      • 5.5.2.1 Germany
      • 5.5.2.2 United Kingdom
      • 5.5.2.3 France
      • 5.5.2.4 Nordics
      • 5.5.2.5 Rest of Europe
    • 5.5.3 South America
      • 5.5.3.1 Brazil
      • 5.5.3.2 Rest of South America
    • 5.5.4 Asia-Pacific
      • 5.5.4.1 China
      • 5.5.4.2 Japan
      • 5.5.4.3 India
      • 5.5.4.4 South-East Asia
      • 5.5.4.5 Rest of Asia-Pacific
    • 5.5.5 Middle East and Africa
      • 5.5.5.1 Middle East
      • 5.5.5.1.1 Gulf Cooperation Council Countries
      • 5.5.5.1.2 Turkey
      • 5.5.5.1.3 Rest of Middle East
      • 5.5.5.2 Africa
      • 5.5.5.2.1 South Africa
      • 5.5.5.2.2 Rest of Africa

6 COMPETITIVE LANDSCAPE

  • 6.1 Market Concentration
  • 6.2 Strategic Moves
  • 6.3 Market Share Analysis
  • 6.4 Company Profiles {(includes Global-level Overview, Market-level Overview, Core Segments, Financials, Strategic Information, Market Rank/Share, Products and Services, Recent Developments)}
    • 6.4.1 Nihon Dempa Kogyo Co., Ltd. (NDK)
    • 6.4.2 Epson Device Corporation
    • 6.4.3 Daishinku Corp. (KDS)
    • 6.4.4 Murata Manufacturing Co., Ltd.
    • 6.4.5 Microchip Technology Inc. (Microsemi/Vectron)
    • 6.4.6 TXC Corporation
    • 6.4.7 Rakon Ltd.
    • 6.4.8 SiTime Corporation
    • 6.4.9 Epson Toyocom
    • 6.4.10 River Eletec Corp.
    • 6.4.11 Siward Crystal Technology
    • 6.4.12 Hosonic Electronic Co., Ltd.
    • 6.4.13 CTS Corporation
    • 6.4.14 NDK Quartz (Asia)
    • 6.4.15 Bliley Technologies
    • 6.4.16 KYOCERA Crystal Device
    • 6.4.17 Integral Petrovsky Plant
    • 6.4.18 Fortune Semiconductor
    • 6.4.19 ICM (International Crystal Mfg.)
    • 6.4.20 Euroquartz Ltd.

7 MARKET OPPORTUNITIES AND FUTURE OUTLOOK

  • 7.1 White-Space and Unmet-Need Assessment