市场调查报告书
商品编码
1273265
到 2028 年的汽车衬套市场预测 - 按车辆类型(乘用车、重型商用车、轻型商用车、电动汽车、其他车辆)、产品、应用和地区的全球分析Automotive Bushing Market Forecasts to 2028 - Global Analysis By Vehicle Type (Passenger Cars, Heavy Commercial Vehicles, Light Commercial Vehicles, Electric Vehicle and Other Vehicle Types), Product, Application and By Geography |
根据 Stratistics MRC 的数据,2022 年全球汽车衬套市场规模将达到 1551.4 亿美元,预计到 2028 年将达到 2345.2 亿美元,复合年增长率为 7.13%。
汽车衬套充当各个部件之间的支撑,协调关节运动并最大限度地减少噪音、振动和压力。 汽车使用的衬套种类繁多,包括法兰衬套、控制臂衬套、转向齿条衬套和板簧衬套。 衬套可确保减少汽车部件之间的衝击和振动传递。 橡胶衬套在汽车工业中用于降低噪音、提高服务人员的舒适度并防止振动损坏,从而推动汽车衬套市场的发展。
随着汽车轻量化在全球范围内取得进展,对轻型衬套的需求预计会发生变化。 由于对重量更轻的乘用车和商用车的需求不断增加,汽车製造商正在使用更轻的原材料。 汽车製造商优先将橡胶和聚氨酯材料用于衬套,以减轻车辆的整体重量。 带有轻型衬套的汽车经历的过度振动和噪音更少,发动机和传感器部件更长,变速箱和其他关键部件更安全。
汽车套管没有标准化,因为它们根据每辆车的特性和规格而有所不同。 市场上有许多不同的衬套,但由于它们用于汽车的各个部分,因此尚未建立标准。 缺乏标准化套管推高了 OEM 製造成本。 随着如此多的新车问世,市场进入者可以在设计上花钱。
乘坐舒适性、安全性和质量越来越受到关注,这有望推动市场扩张。 此外,由于严格的政府法规和众多销售豪华车的供应商的存在,需要高质量的汽车衬套来加强车辆在道路上的悬架,这使得原始设备製造商能够为市场服务。 更好的衬套使原始设备製造商能够生产噪音和振动更小、驾驶员和乘客更安全、更舒适的汽车。 为了确保新车的振动和噪音更小,汽车製造商将重点放在NVH研究上。 消费者对安全性和舒适性更高的豪华车的需求不断增加,预计将支持市场扩张。
更换汽车衬套需要时间和精力。 对于自润滑衬套,重要的是要防止灰尘进入轴承,因为它会划伤衬套和组件的表面。 因此,必须使用保护橡胶盖。 此外,聚氨酯车辆衬套不能提供非常高的舒适度或降噪水平。 在预测期内,这有望抑制汽车衬套市场的增长。
全球汽车生产活动受到疫情的不利影响,因为疫情法规迫使许多製造商关闭工厂。 例如,国际汽车製造商协会 (OICA) 报告称,2020 年的汽车产量与 2019 年相比下降了 15.7%。 2020 年汽车产量下降影响了对包括衬套在内的多种汽车零部件的需求。 由于供应链中断导致半导体芯片短缺,全球汽车产量下降,阻碍了市场增长。
随着全球对乘用车的需求增加,预计乘用车行业将实现有利增长。 此外,随着商用车生产和销售的增加,政府对乘用车重量减轻的严格规定允许製造商为乘用车配备更小的衬套。
在预测期内,悬架臂衬套部分预计将以最快的复合年增长率增长。 这是因为在湿滑路面上提供更多舒适性的高级车辆的日益普及推动了对用于悬架应用的汽车衬套的需求。 汽车悬架衬套被视为汽车的重要部件,因为它们控制着金属部件的运动。 汽车悬架衬套在各种道路上防止车辆打滑、翻车和碰撞,引领市场。
由于汽车行业的扩张,预计亚太地区在预测期内将占据最高的市场份额,预计增加对汽车行业升级的投资将推动市场扩张。 在中国和印度,印度製造和初创印度等政府支持措施有望刺激最先进的汽车零部件製造设施的发展。 由于该地区工业活动的增加,对重型商用车的需求增加预计将推动该地区的市场扩张。
由于许多顶级汽车製造商的存在,预计北美在预测期内的复合年增长率最高。 这也是由于世界各地个人收入水平的提高。 由于美国和加拿大的经济不断发展,该地区具有市场扩张的潜力。 在预测期内,这些国家居民的收入水平预计将上升,使他们能够购买更多汽车,从而推动市场增长。
2023 年 4 月,大陆集团和 HERE 将与依维柯合作,以提高商用车的安全性和燃油效率。 这些通过大陆集团的 eHorizo□□n 平台提供,该平台聚合和分发 HERE 地图内容,数据交换由大陆集团的可扩展 4G/5G 远程信息处理控制单元实现。
2023 年 2 月,Monroe(R) 宣布推出适用于通用车辆的新型 OESpectrum(R) 减震器和支架组件。 新的预组装部件采用一个完整的包装,不需要特殊工具,也不会在拆卸过程中损坏其他部件。
2021 年 11 月,德尔福科技将为特斯拉车型推出全新的全球转向和悬架产品,为新的维修前景铺平道路。此次发布将包括控制臂、连桿稳定器、横拉桿,它由一些新部件组成,例如作为球形接头。
According to Stratistics MRC, the Global Automotive Bushing Market is accounted for $155.14 billion in 2022 and is expected to reach $234.52 billion by 2028 growing at a CAGR of 7.13% during the forecast period. Automotive bushings serve as a bolster between various components, regulating joint movement and minimising noise, vibration, and stress. The car uses a variety of bushings, including flanged bushings, control arm bushings, steering rack bushings, and leaf spring bushings. The bushing guarantees lessened shock and vibration transmission between the components of the vehicle. Rubber bushings are used in the automotive industry to lessen noise, increase driver comfort, and prevent vibration-related damage which boosts the automotive bushing market.
The need for lightweight bushing is anticipated to change as the emphasis on lightweight automobiles increases globally. Automakers are using lightweight raw materials as a result of the rising demand for lightweight passenger and commercial cars. Rubber and polyurethane materials are being prioritised by automobile manufacturers for the bushing, which helps lighten the total weight of vehicles. Vehicles with lightweight bushing have less excessive vibration and noise, have longer-lasting engines and sensor components, and are safer for the transmission and other crucial components.
Automotive bushings are not standardised since they vary depending on the characteristics and specifications of each vehicle. There are many different bushings on the market, but because they are used with different parts of automobiles, they do not have any established standards. The bushing's lack of standardisation drives up manufacturing costs for OEMs. The creation of numerous new model automobiles enables market participants to spend money on design.
The growing focus on enhancing ride comfort, safety, and quality is anticipated to drive market expansion. Furthermore, the need for high-quality automotive bushing to enhance the suspension of vehicles on the road is allowing OEMs to provide the market thanks to strict government restrictions and the availability of numerous vendors selling luxury cars. Better bushing enables OEMs to produce cars with less noise and vibration that are safer and more comfortable for drivers and passengers. To ensure that new cars have less vibration and noise, automotive manufacturers are emphasising NVH study. The market expansion is anticipated to be supported by the rising consumer demand for luxury vehicles with improved safety and comfort.
A car's automotive bushing replacement process is time-consuming and difficult. In self-lubricating bushings, it's crucial to make sure no dust enters the bearing because that could harm the bushings and the part's surface. The use of rubber protection covers is required in this situation. Furthermore, the level of comfort and noise reduction offered by polyurethane vehicle bushings is not very great. Over the forecast period, this is anticipated to restrain the growth of the automotive bushing market.
Worldwide auto manufacturing activities were adversely affected by the COVID-19 pandemic as many manufacturers were forced to shut down their factories owing to pandemic regulations. For example, the International Organisation of Motor Car Manufacturers (OICA) reports that car manufacturing decreased by 15.7% in 2020 compared to 2019. The fall in car production in 2020 had an impact on the demand for several automobile parts, including bushing. Automobile manufacturing decreased all across the world as a result of the shortage of semiconductor chips brought on by the disruption of the supply chain thus hindering the growth of the market.
The passenger cars segment is estimated to have a lucrative growth, due to the expanding demand for passenger vehicles around the world. In addition, because of growing production and sales of commercial vehicles, manufacturers are able to include lightweight bushing into passenger vehicles thanks to strict government rules on light-weight passenger automobiles.
The suspension arm bushings segment is anticipated to witness the fastest CAGR growth during the forecast period, due to the need for automobile bushing for suspension applications is being driven by the rising popularity of premium vehicles that provide greater comfort on slick roads. Because it regulates the movement of the metal elements, the automotive suspension bushing is regarded as a crucial component of the car Vehicle skids, flips, and crashes are all prevented by automotive suspension bushing on various types of roads which drives the market.
Asia Pacific is projected to hold the highest market share during the forecast period owing to the expansion of the automobile sector in the region and increasing investment in sophisticated automotive operations is anticipated to drive market expansion. The development of cutting-edge manufacturing facilities for automotive components is expected to be fuelled by supportive government efforts in China and India including Make in India and Startup India. The expansion of the market is anticipated to be fuelled by the rising demand for heavy commercial vehicles as a result of the region's expanding industrial activity which is propelling the market in this region.
North America is projected to have the highest CAGR over the forecast period, owing to the presence of numerous top automakers. The rising income levels of individuals around the world will also have a role. Due to the US and Canada's expanding economies, the region has potential for market expansion. During the forecast period, it is anticipated that the income levels of those who live in these countries would increase, allowing them to purchase more vehicles thereby enhancing the market growth.
Some of the key players profiled in the Automotive Bushing Market include: Continental AG, Delphi Technologies, Vibracoustic, Hyundai Polytech India Pvt. Ltd., Dupont, Tenneco, Mahle, Cooper Standard Holdings Ltd., Boge rubber and plastics, Sumitomo Riko, Siemens, Trench Limited, Federal-Mogul LLC, Nolathane, Paulstra SNC, Benara Udyog Limited, Oiles Corporation, ZF Friedrichshafen AG, HSP & TRENCH BUSHING GROUP and Hutchinson Paulstra
In April 2023, Continental and HERE partner with IVECO to increase safety and fuel-saving functions in commercial vehicles, these will be delivered through Continental's eHorizon platform, aggregating and delivering HERE map content, with data exchange enabled by Continental's scalable 4G/5G telematics control unit.
In Feb 2023, Monroe® Launches New OESpectrum® Shock and Mount Assembly for Popular Vehicle Applications, this new preassembled part comes in one complete package, eliminating the need for special tools and potential damage to other parts during the removal process.
In Nov 2021, Delphi Technologies launches new global steering and suspension offering for the Tesla Model unlocking a path to a new repair prospect, the launch is comprised of several new parts, including control arms, link stabilisers, tie rods, and ball joints.