市场调查报告书
商品编码
1625309
到 2030 年空气喷射止回阀市场预测:按产品类型、材料类型、应用、最终用户和地区进行的全球分析Air Inject Check Valve Market Forecasts to 2030 - Global Analysis By Product Type (Air Injection Check Valve and Air Injection Control Valve), Material Type, Application, End User and by Geography |
根据 Stratistics MRC 的数据,2024 年全球空气注射止回阀市场规模为 1,102.9 亿美元,预计到 2030 年将达到 1,774.6 亿美元,预测期内复合年增长率为 8.25%。
空气喷射止回阀是汽车二次空气喷射系统中的关键部件,旨在透过在引擎冷却时将新鲜空气引入排气流来减少有害排放气体。此阀门可让空气仅沿一个方向从空气帮浦流至排气歧管或触媒转换器,同时防止废气回流至空气喷射系统。此外,空气喷射止回阀通常由坚固的材料製成,能够承受高温和腐蚀性气体,符合排放法规,确保引擎有效运行,并保护其他部件免受回流相关的损坏,这对于保护空气喷射系统组件至关重要。
根据美国环保署 (EPA) 的规定,Tier 3 标准要求到 2025 年所有车辆的平均 NOx+NMOG排放达到 0.03 克/英里。这导致采用先进的排放控制技术,例如使用空气喷射止回阀的二次空气喷射系统。
人们对空气污染的兴趣日益浓厚
空气污染对环境和人体造成的负面影响逐渐引起越来越多人们的关注。这种意识给政府和汽车製造商带来了巨大的压力,要求他们采用和推广环保汽车技术。减少废气排放的一种方法是采用采用空气喷射止回阀的二次空气喷射系统。这在冷启动期间尤其重要,此时引擎排放的污染物最多。此外,政府也为配备先进排放控制系统的汽车提供税收减免和补贴,鼓励使用空气喷射止回阀等零件。
高昂的生产和维护成本
二次空气喷射系统严重依赖空气喷射止回阀,止回阀必须由高精度和坚固的材料製成,以承受恶劣的工作条件。这些阀门通常采用陶瓷涂层、高性能聚合物和不銹钢等先进材料製造,因此製造成本昂贵。由于它们是复杂排气控制系统的一部分,因此这些阀门的维护和修理费用也很高。此外,这可能会阻止价格敏感市场的消费者选择具有先进排放控制系统的车辆。
空气喷射系统技术的进步
只要汽车製造商继续投资更环保、更有效率的排放控制技术,製造商就有很大的空间来突破空气喷射止回阀设计和材料创新的界限。使用钛合金、高性能聚合物和陶瓷等先进材料开发更强、更轻、更有效的止回阀将提供满足更可靠组件的需求的机会。此外,智慧技术的发展,例如在空气喷射止回阀中添加感测器和诊断功能,可以改善其功能并减少维护需求。
废气监理替代方案的竞争日益激烈
由于排放气体控制系统的技术进步,已经开发出可与空气喷射止回阀直接竞争的替代解决方案。其中一个解决方案是三元触媒转换器,常见于汽油动力车辆,可降低碳氢化合物 (HC)、一氧化碳 (CO)、氮氧化物 (NOx) 等,具有多种用途。此外,随着汽车製造商采用更整合和有效的排放控制技术(例如这些先进的触媒转换器),二次空气喷射系统和相关零件变得不再必要。
COVID-19 大流行扰乱了全球供应链,导致重要零件的生产和交付延迟,从而严重影响了空气注射止回阀市场。由于劳动力短缺、工厂关闭和封锁,汽车行业的生产放缓,减少了对空气喷射止回阀的需求,而空气喷射止回阀对于车辆排放控制系统至关重要。此外,疫情(全球大流行)造成的经济不确定性导致汽车销售下降,进一步影响排放控制零件市场。儘管早期因疫情而遭受挫折,但汽车行业的稳步復苏导致人们重新关注排放气体法规,支持了市场的长期成长。
空气喷射止回阀领域预计将成为预测期内最大的领域
空气喷射止回阀领域预计将占据空气喷射止回阀市场的最大份额。该组件透过控制进入排气系统的空气流量来帮助减少有害排放气体,对于汽车排放气体控制系统至关重要。它经常用于配备内燃机 (ICE) 的车辆,以满足空气品质法规。日益严格的环境法规要求製造商安装排放气体控制系统是推动该市场需求的主要因素。此外,对车辆性能、燃油经济性和遵守更严格的排放法规的日益关注进一步支持了空气喷射止回阀市场。
塑胶产业预计在预测期内复合年增长率最高
预计空气喷射止回阀市场的塑胶部分在预测期内复合年增长率最高。汽车产业对轻量材料日益增长的需求是这一增长的关键驱动力,因为塑胶零件有助于减轻车辆总重量、提高燃油效率和减少排放气体。此外,塑胶还具有经济实惠、易于成型和耐腐蚀性等优点,使其成为生产商的理想选择。汽车产业对降低成本和遵守严格排放标准的持续重视预计将增加对塑胶空气喷射止回阀的需求,从而推动市场爆炸性扩张。
空气喷射止回阀市场预计将由北美地区主导。这主要是由于汽车製造商的广泛存在以及美国和加拿大等国家严格的排放法规。随着环保署 (EPA) 等监管机构执行更严格的排放标准,北美已成为汽车创新的主要中心。这增加了对空气喷射止回阀等先进排放控制部件的需求。此外,透过越来越多地采用旨在减少车辆排放气体和提高燃油效率的技术,该地区的市场得到进一步加强,使其成为全球市场的关键参与者。
空气喷射止回阀市场预计将以亚太地区最高的复合年增长率成长。这一增长是由于中国、印度和日本等国家的汽车业在环保意识不断提高、排放法规收紧和汽车产量增加的推动下爆炸式增长。随着这些国家都市化程度的提高并实施更严格的排放法规,预计对空气喷射止回阀以满足这些法规的需求将会增加。此外,由于对燃油效率的重视和越来越多地采用尖端汽车技术,预计未来几年亚太地区的市场成长将得到推动。
According to Stratistics MRC, the Global Air Inject Check Valve Market is accounted for $110.29 billion in 2024 and is expected to reach $177.46 billion by 2030 growing at a CAGR of 8.25% during the forecast period. An air inject check valve is a critical component in a vehicle's secondary air injection system, designed to reduce harmful emissions by introducing fresh air into the exhaust stream during cold engine start-up. This valve keeps exhaust gases from returning to the air injection system while permitting air to flow only in one direction, from the air pump to the exhaust manifold or catalytic converter. Moreover, the air inject check valve, which is usually constructed of sturdy materials to resist high temperatures and corrosive gases, is essential for adhering to emission standards, guaranteeing effective engine operation, and shielding other air injection system parts from backflow-related damage.
According to the U.S. Environmental Protection Agency (EPA), the Tier 3 standards require a fleet-wide average of 0.03 grams/mile for NOx + NMOG emissions by 2025. This has driven the adoption of advanced emission control technologies, such as secondary air injection systems using air inject check valves.
Growing concern over air pollution
The detrimental effects of air pollution on the environment and human health have been gradually coming to the public's attention. Because of this awareness, governments and automakers are under a lot of pressure to embrace and advance environmentally friendly vehicle technologies. One way to reduce tailpipe emissions is by using secondary air injection systems, which use air injection check valves. This is especially important during cold starts, when engines release the most pollutants. Additionally, governments are providing tax breaks and subsidies for automobiles with sophisticated emission control systems, which promote the use of parts like air injection check valves.
Exorbitant expenses for production and maintenance
Secondary air injection systems depend heavily on air injection check valves, which need to be made with extreme precision and robust materials to survive demanding operating conditions. These valves are frequently made using sophisticated materials like ceramic coatings, high-performance polymers, and stainless steel, which raises the cost of production. Due to their incorporation into intricate emission control systems, these valves can also be expensive to maintain and repair. Furthermore, this may deter consumers in price-sensitive markets from choosing cars with sophisticated emission control systems.
Advancements in air injection system technology
Manufacturers have a lot of room to push the boundaries of air injection check valve design and material innovation as long as automakers keep investing in more environmentally friendly and efficient emission control technologies. An opportunity to meet the demand for more dependable components is presented by the development of check valves that are stronger, lighter, and more effective using cutting-edge materials like titanium alloys, high-performance polymers, and ceramics. Moreover, smart technology developments like adding sensors and diagnostic features to air injection check valves may improve their functionality and lower maintenance requirements.
Increasing competition from alternative methods of emission control
Alternative solutions that directly compete with air injection check valves have been developed as a result of technological advancements in emission control systems. One such remedy is the three-way catalytic converter, which is frequently found in cars that run on gasoline and has several uses, such as lowering hydrocarbons (HC), carbon monoxide (CO), and nitrogen oxides (NOx). Additionally, secondary air injection systems and related parts are becoming less necessary as automakers embrace more integrated and effective emission control technologies, like these sophisticated catalytic converters.
The global supply chains were disrupted by the COVID-19 pandemic, which caused delays in the production and delivery of essential components, which had a substantial effect on the air injection check valve market. Because of labor shortages, factory closures, and lockdowns, the automotive industry's production slowed, which decreased demand for air injection check valves-which are crucial for vehicles' emission control systems. Furthermore, the pandemic's economic uncertainty also resulted in a drop in car sales, which further impacted the market for emission control components. Notwithstanding the early setbacks brought on by the pandemic, the market's long-term growth was bolstered by a renewed emphasis on emissions regulations as the automotive sector steadily recovered.
The Air Injection Check Valve segment is expected to be the largest during the forecast period
The Air Injection Check Valve segment is expected to hold the largest share in the Air Injection Check Valve market. By controlling the airflow into the exhaust system, this part helps lower harmful emissions and is essential to automotive emission control systems. It is frequently utilized in automobiles with internal combustion engines (ICEs) in order to satisfy air quality regulations. Growing environmental regulations requiring manufacturers to install emission-controlling systems are the main factor driving demand for this market. Moreover, the market for air injection check valves is further supported by the increased emphasis on vehicle performance, fuel economy, and adherence to more stringent emission regulations.
The Plastic segment is expected to have the highest CAGR during the forecast period
Over the course of the forecast period, the plastic segment of the air injection check valve market is anticipated to have the highest CAGR. Because plastic parts contribute to a vehicle's overall weight reduction, which improves fuel economy and lowers emissions, the automotive industry's growing need for lightweight materials is the primary driver of this growth. Furthermore, plastic has benefits like affordability, ease of molding, and resistance to corrosion, which makes it a desirable option for producers. The automotive industry's continued emphasis on cost reduction and adherence to strict emission standards is anticipated to increase demand for plastic-based air injection check valves, which will fuel the market's explosive expansion.
The market for air injection check valves is anticipated to be dominated by the North American region. This is mostly because of the widespread presence of automakers and the strict emission laws in nations like the US and Canada. With regulatory agencies like the Environmental Protection Agency (EPA) enforcing stringent emission standards, North America has emerged as a major center for automotive innovation. This has increased demand for sophisticated emission control components, such as air injection check valves. Moreover, the market in this region is further strengthened by the increasing adoption of technologies aimed at lowering vehicle emissions and enhancing fuel efficiency, which positions it as the leading player in the global market.
The air injection check valve market is anticipated to grow at the highest CAGR in the Asia-Pacific region. This growth is ascribed to the automotive industry's explosive growth in nations like China, India, and Japan, which has been fueled by rising environmental consciousness, tighter emission regulations, and increased vehicle production. The need for air injection check valves to meet these regulations is expected to increase as these countries continue to urbanize and impose stricter emission standards. Furthermore, the market's growth in the Asia-Pacific region is anticipated to be fueled in the upcoming years by the region's growing emphasis on fuel efficiency as well as the growing adoption of cutting-edge automotive technologies.
Key players in the market
Some of the key players in Air Inject Check Valve market include Catalyst Retail Pvt. Ltd., ACDelco (General Motors Company), GenuineXL Inc, Dorman Products (Ford Motor Company), Acura (Honda Motor Company, Ltd.), Tomco Inc, Pierburg (Rheinmetall Automotive AG), Motorcraft Inc, Smart Parts Online Pvt. Ltd., AutoTrust Platinum, Kobalt Inc, AutoKartz Internet (P) Ltd. and GISON Machinery Inc.
In May 2024, Dorman Products, Inc. is announcing the release of hundreds of new aftermarket automotive components and assemblies. The new products add to an expansive catalog of more than 120,000 SKUs, a depth and diversity of coverage offering millions of new sales and repair opportunities for customers throughout North America.
In December 2022, Rheinmetall AG has announced that its subsidiary Pierburg has landed a EUR 300 million contract for the supply of exhaust gas recirculation (EGR) modules to a popular automaker. The new order strengthens the Group's market position in the highly competitive emissions reduction market.
In August 2020, TomCo Energy plc, the US operating oil development group focused on using innovative technology to unlock unconventional hydrocarbon resources, is pleased to announce that Greenfield Energy LLC, the Company's recently formed 50/50 joint venture with Valkor LLC, has entered into a commercial trial agreement with Quadrise Fuels International plc.