全球锻压机市场规模（按产品、应用、地区、范围和预测）

锻造机的市场规模及预测

2024 年压接机市场规模价值为 42.6 亿美元，预计到 2031 年将达到 59.6 亿美元，2024 年至 2031 年的复合年增长率为 4.30%。锻造机是一种低成本、高效地锻造、缩减和成型棒材、管材和线材的方法，可用于汽车、化学和其他工业应用。全球压接机市场报告对市场进行了全面的评估。它对关键细分市场、趋势、市场推动因素、竞争格局以及在市场中发挥关键作用的因素进行了全面的分析。

锻造机的全球市场定义

压接机，也称为压接机，是一种高效、低成本的用于尖锐化、缩减和成型棒材、管材和线材的方法。它基于一个简单的原则：它是一个透过旋转锤和成型模在工件週边进行一系列非常快速的打击来成型金属的过程。旋锻是一种非常经济的对管材、棒材和线材进行热或冷重拉、定径、缩径、成型、锥度加工、连接和定型的方法。锻压可以采用热锻或冷锻方式进行，但冷锻较常见，因为它对大多数材料都有硬化作用。这个过程改善了晶粒结构，增强了零件强度，并使其具有非常精细的表面。

锻造机强制工件通过模具，以减少或扩大管或棒的直径。锻造压力是将管棒放入模具中或透过将模具锤在一起来减少金属直径的过程。压接机不会造成任何材料损失或材料变形。由于不会造成材料损失，因此压接机适用于贵金属。压接机和压接机通常被视为冷成型工艺，在某些情况下也用作热成型工艺。压扣加工主要分为管压扣加工及旋压扣加工。

管锻机采用与拉丝类似的製程。这些锻压机将心轴放置在管内，并对外径施加径向压缩力，使管扩张并使外径与内部形状不同。压接机用于组装和最终用途。将配件放置在电缆上并插入压模中，锤击作用的冷成型力促使完整的组装。这些包括帆船索具、建筑电缆栏杆和休閒绳索课程电缆。我们也提供航空航太管路组件和流体控制管路。

全球压接机市场概况

第一类锻造机挤压工件并迫使其通过约束模具以减少其直径，类似于拉丝製程。这类似于压接管。第二类是使用两个或更多模具来锤击圆形工件以减少其直径。该过程通常称为旋转锻造或径向锻造。管子可能被贴上标籤并且直径减小。在这种情况下，可以先将管子穿过模具，然后使用旋转压模机从另一侧拉出，并在拉丝机上拉出。锻造压力是一种简单的方法，适用于贵金属，因为没有材料损失。

旋锻是一种冷加工工艺，用于减少直径、形成锥度或在圆形工件上形成尖角。心轴也可用于赋予空心工件的内部形状。将轴承压入轴承座时，要么将凹槽扩口以匹配轴承座倒角，要么将轴承座材料扩口到轴承的末端。扩口是使用一对围绕孔移动并送入零件的辊来完成的，从而以可控且可预测的方式使金属变形。通常使用油脂来润滑这种模锻过程，称为滚压模锻。压接机使用两个或四个分体模具，每分钟可分离和闭合多达 2,000 次。这是透过将模具安装在由马达旋转的机器主轴上来实现的。

主轴安装在包含滚轮（如滚子轴承）的保持架中。滚轮比保持架大，当主轴旋转时，离心力将模具推到保持架上，使模具在滚轮上移动。在四模机中，滚轮的数量意味着所有模具同时关闭。如果辊子的数量不能使所有的模具对同时闭合，这种机器就称为旋转锻造机，但它仍然是一台锻造机。旋转压紧机是一种蠕动主轴型压紧机，其中主轴和保持架以相反的方向旋转。

目录

第 1 章 全球压接机市场简介

市场概况
• 研究范围
• 先决条件

第 2 章执行摘要

第 3 章：经过验证的市场研究方法

• 资料探勘
• 验证
• 主要来源
• 资料来源列表

第 4 章 压接机全球市场展望

• 概述
• 市场动态
  • 促进因素
  • 阻碍因素
  • 机会
• 波特五力模型
• 价值链分析

第 5 章 全球压接机市场（依产品划分）

• 概述
• 径向锻造机
• 旋锻机
• 其他

• 概述
• 化学和材料
• 机械设备
• 汽车
• 其他

第 7 章 全球压接机市场（按地区）

• 概述
• 北美洲
  • 美国
  • 加拿大
  • 墨西哥
• 欧洲
  • 德国
  • 英国
  • 法国
  • 其他欧洲国家
  亚太地区
  • 中国
  • 日本
  • 印度
  • 其他亚太地区
• 世界其他地区
  • 拉丁美洲
  • 中东和非洲

第 8 章 全球压接机市场：竞争格局

• 概述
• 各公司的市场排名
• 主要发展策略

第9章 公司简介

• Talurit
• SAHM SPLICE GmbH
• FENN
• Comtech North America
• Loos and Company

第 10 章附录

• 相关研究

Swaging Machine Market Size And Forecast

Swaging Machine Market size was valued at USD 4.26 Billion in 2024 and is projected to reach USD 5.96 Billion by 2031, growing at a CAGR of 4.30% from 2024 to 2031. Swaging is a simple method of choice for precious metals as there is no loss of material in the process as well as Swaging machines, are a low-cost way to efficiently point, reduce and form rod, tube or wire therefore they are useful in the automotive, chemical industry, etc. applications are the factors that will foster the market growth in the projected years. The Global Swaging Machine Market report provides a holistic evaluation of the market. The report offers a comprehensive analysis of key segments, trends, drivers, restraints, competitive landscape, and factors that are playing a substantial role in the market.

Global Swaging Machine Market Definition

Swaging machines, known as swager, are a low-cost way to efficiently point, reduce and form rod, tube, and wire. Based on a simple principle, it is the process of shaping metal using a series of very rapid blows delivered by rotating hammers and forming dies around a piece of work. It is a highly economical method to point tubing, rod, wire for redraw, size, reduce, shape, taper, bond, and form metal parts that are hot or cold. Swaging is performed both hot and cold, although cold is popular because of its hardening effect on most of the materials. The process improves grain structure, giving the part greater strength and an unusually fine finish.

Swaging machines form a workpiece by forcing it in the die to reduce or increase the diameter of tubes and rods. Swaging is done by placing the tube rod inside a die or a process where the die is hammered together to reduce the diameter of the metal. Swaging machines do not result in the loss of material and material deformation. Since there is no material loss, swaging machines are used with precious metals. Swagers and swaging machines are commonly considered cold forming processes and are done as a hot forming process in some situations. Swaging machine processes are mainly divided into two categories, tube swaging and rotary swaging machines.

Tube swaging machines use a process which is similar to drawing wire. These swaging machines are expanded by placing a mandrel in the tube and applying radial, compressive forces on the outer diameter, which allows the inside shape to differ from the outer circular diameter. The swaging machine is used in applications such as assembling and end-forming. A fitting is set over a cable, then inserted into the swager and the cold formation force of the hammer actions gives a complete assembled piece. Some of them are Sailing rigging equipment, architectural cable railings, and recreational ropes course cables. A few of these are Aerospace tube components and fluid control tubes.

What's inside a VMR industry report?

Our reports include actionable data and forward-looking analysis that help you craft pitches, create business plans, build presentations and write proposals.

Global Swaging Machine Market Overview

The first category in the swaging machine involves extrusion of the workpiece, forcing it through a confining die to reduce its diameter, similar to the process of drawing wire. This may be similar to tube swaging. The second category consists of two or more dies used to hammer a round workpiece into a smaller diameter. This process is usually termed rotary swaging or radial forging. Tubes may be tagged and reduced in diameter to enable the tube to be initially fed through the die to then be pulled from the other side by using a rotary swager, which allows them to be drawn on a drawbench. Swaging is a simple method of choice for precious metals as there is no loss of material in the process.

Rotary swaging is a cold working process used in reducing the diameter, producing a taper, or adding a point to a round workpiece. It can impart internal shapes in hollow workpieces using a mandrel. Swaging a bearing into a housing means either flaring its grooves to the chamfer of the housing or flaring the housing's material over the edge of the bearing. The flaring process is done with a pair of rolls that moves around the hole and are fed down into the part, deforming the metal in a controlled, predicted way. Grease is usually used to lubricate this swaging process, which is called roller swaging. A swaging machine works by using two or four split dies which separate and close up to 2,000 times per minute. This action is done by mounting the dies into the machine's spindle which is further rotated by a motor.

The spindle is mounted inside a cage containing rollers that look like a roller bearing. The rollers are larger in size than the cage as the spindle spins the dies are pushed out to ride on the cage by centrifugal force, and the dies cross over the rollers they push the dies together due of their larger size. On a four-die machine, the number of rollers causes all dies to close at a time. If the number of rollers does not cause all pairs of dies to close at the same time then the machine is called a rotary forging machine, but it is still a swaging process. A variation of the rotary swager is the creeping spindle swaging machine in which both the spindle and cage revolve in opposite directions, this prevents the production of fins between the dies in which the material being swaged grows up in between the dies.

Global Swaging Machine Market: Segmentation Analysis

The Global Swaging Machine Market is Segmented on the basis of Product, Application, And Geography.

Swaging Machine Market, By Product

• Radial Swaging Machine
• Rotary Swaging Machine

Based on Product, The market is segmented into Radial Swaging Machine and Rotary Swaging Machine.

Swaging Machine Market, By Application

• Chemical And Materials
• Machinery And Equipment
• Automotive
• Others

Based on Application, The market is segmented into Chemical And Materials, Machinery And Equipment, Automotive, and Others.

Swaging Machine Market, By Geography

• North America
• Europe
• Asia Pacific
• Rest of the world
• On the basis of Geography, The Swaging Machine Market is classified into North America, Europe, Asia Pacific, and the Rest of the world.

Key Players

• The "Global Swaging Machine Market" study report will provide a valuable insight with an emphasis on the global market including some of the major players such as
• Talurit, SAHM SPLICE GmbH, FENN, Comtech North America, and Loos and Company.

Our market analysis also entails a section solely dedicated to such major players wherein our analysts provide an insight into the financial statements of all the major players, along with its product benchmarking and SWOT analysis. The competitive landscape section also includes key development strategies, market share, and market ranking analysis of the above-mentioned players globally.

TABLE OF CONTENTS

1 INTRODUCTION OF GLOBAL SWAGING MACHINE MARKET

• 1.1 Overview of the Market
• 1.2 Scope of Report
• 1.3 Assumptions

2 EXECUTIVE SUMMARY

3 RESEARCH METHODOLOGY OF VERIFIED MARKET RESEARCH

• 3.1 Data Mining
• 3.2 Validation
• 3.3 Primary Interviews
• 3.4 List of Data Sources

4 GLOBAL SWAGING MACHINE MARKET OUTLOOK

• 4.1 Overview
• 4.2 Market Dynamics
  • 4.2.1 Drivers
  • 4.2.2 Restraints
  • 4.2.3 Opportunities
• 4.3 Porters Five Force Model
• 4.4 Value Chain Analysis

5 GLOBAL SWAGING MACHINE MARKET, BY PRODUCT

• 5.1 Overview
• 5.2 Radial Swaging Machine
• 5.3 Rotary Swaging Machine
• 5.4 Others

6 GLOBAL SWAGING MACHINE MARKET, BY APPLICATION

• 6.1 Overview
• 6.2 Chemical And Material
• 6.3 Machinery And Equipment
• 6.4 Automotive
• 6.5 Others

7 GLOBAL SWAGING MACHINE MARKET, BY GEOGRAPHY

• 7.1 Overview
• 7.2 North America
  • 7.2.1 The U.S.
  • 7.2.2 Canada
  • 7.2.3 Mexico
• 7.3 Europe
  • 7.3.1 Germany
  • 7.3.2 The U.K.
  • 7.3.3 France
  • 7.3.4 Rest of Europe
• 7.4 The Asia Pacific
  • 7.4.1 China
  • 7.4.2 Japan
  • 7.4.3 India
  • 7.4.4 Rest of Asia Pacific
• 7.5 Rest of the World
  • 7.5.1 Latin America
  • 7.5.2 The Middle East and Africa

8 GLOBAL SWAGING MACHINE MARKET COMPETITIVE LANDSCAPE

• 8.1 Overview
• 8.2 Company Market Ranking
• 8.3 Key Development Strategies

9 COMPANY PROFILES

• 9.1 Talurit
  • 9.1.1 Overview
  • 9.1.2 Financial Performance
  • 9.1.3 Product Outlook
  • 9.1.4 Key Developments
• 9.2 SAHM SPLICE GmbH
  • 9.2.1 Overview
  • 9.2.2 Financial Performance
  • 9.2.3 Product Outlook
  • 9.2.4 Key Developments
• 9.3 FENN
  • 9.3.1 Overview
  • 9.3.2 Financial Performance
  • 9.3.3 Product Outlook
  • 9.3.4 Key Developments
• 9.4 Comtech North America
  • 9.4.1 Overview
  • 9.4.2 Financial Performance
  • 9.4.3 Product Outlook
  • 9.4.4 Key Developments
• 9.5 Loos and Company
  • 9.5.1 Overview
  • 9.5.2 Financial Performance
  • 9.5.3 Product Outlook
  • 9.5.4 Key Developments

10 Appendix

• 10.1 Related Research