汽车触媒转换器市场规模（按类型、材料、车辆类型、区域范围和预测）

汽车触媒转换器的市场规模及预测

2024 年汽车触媒转换器市场规模为 1,966.1 亿美元，预计到 2032 年将达到 3,617.6 亿美元，2026 年至 2032 年的复合年增长率为 7.92%。

据了解，触媒转换器是安装在汽车上，减少有害废气排放的重要排放控制设备。

据了解，该装置的工作原理是将内燃机废气中的有毒气体和污染物转化为毒性较小的污染物。

此外，触媒转换器是世界各地排放法规的强制性要求，被认为是满足日益严格的环境标准的必需品。

全球汽车触媒转换器市场动态

影响汽车触媒转换器市场的关键市场动态是：

关键市场驱动因素

排放法规日益严格：由于车辆排放气体法规日益严格，触媒转换器的需求急剧增长。例如，2015年生效的欧盟欧盟6排放标准要求大幅减少新车的氮氧化物 (NOx) 和粒状物排放。根据欧洲环境署 (EEA) 的数据，到2020年，新车平均每公里二氧化碳排放量将排放95克，这表明人们将继续追求更清洁的车辆，触媒转换器市场也将持续成长。

汽车产量成长：由于全球汽车产销不断成长，触媒转换器的需求也随之成长。根据国际汽车工业组织 (OICA) 的数据，2021 年全球汽车产量达到 7,790 万辆，已从新冠疫情的影响中显着復苏。随着汽车产量的成长，对高效能排气系统（尤其是触媒转换器）的需求也随之成长，以满足排放法规的要求。

转型为电动和混合动力汽车：电动和混合动力汽车（在内燃机中使用触媒转换器）的日益普及是市场发展的关键驱动力。根据国际能源总署 (IEA) 报告，预计 2021 年电动车销量将超过 660 万辆，年增与前一年同期比较 %。由于这些汽车通常将触媒转换器与电动动力传动系统整合在一起，因此，向更环保技术的转变预计将维持汽车触媒转换器市场的需求。

主要挑战

原物料价格波动：触媒转换器中使用的贵金属，如铂、钯和铑，价格波动性大，受市场需求、地缘政治紧张局势和采矿中断等因素的影响而大幅波动。

技术进步与适应：汽车产业技术进步日新月异，尤其是电动车和混合动力汽车的兴起，对传统触媒转换器製造商构成了挑战。随着越来越多的製造商将重点转向无需传统触媒转换器的电动车，市场上的企业必须适应不断变化的技术，并投资研发以创新新的解决方案。

不断变化的法规与合规性：汽车产业受到不断变化的环境法规的限制。遵守严格的排放气体标准可能颇具挑战性，尤其对于在多个地区运作且监管要求各异的製造商而言。

主要趋势：

电气化的影响：向电动车的转变鼓励触媒转化器製造商多样化其产品供应并探索触媒技术的新应用。

奈米技术的整合：先进的奈米技术正在用于催化剂开发，从而增加催化剂的表面积并提高其有效性，同时减少所需的贵金属数量。

回收工作：正在开发增强的回收工艺，以从废弃触媒转换器中回收贵金属，从而有可能促进永续性并降低材料成本。

目录

第一章 引言

• 市场定义
• 市场区隔
• 调查方法

第二章执行摘要

• 主要发现
• 市场概览
• 市集亮点

第三章市场概述

• 市场规模和成长潜力
• 市场趋势
• 市场驱动因素
• 市场限制
• 市场机会
• 波特五力分析

第四章 汽车触媒转换器市场（按类型）

• 二元氧化催化剂
• 三效氧化催化剂
• 柴油氧化催化剂
• 其他的

第五章 汽车触媒转换器市场（依材料）

• 铂
• 钯
• 铑
• 其他的

6. 汽车触媒转换器市场（依车型）

• 搭乘用车
• 商用车
• 其他的

第七章区域分析

• 北美洲
• 美国
• 加拿大
• 墨西哥
• 欧洲
• 英国
• 德国
• 法国
• 义大利
• 亚太地区
• 中国
• 日本
• 印度
• 澳洲
• 拉丁美洲
• 巴西
• 阿根廷
• 智利
• 中东和非洲
• 南非
• 沙乌地阿拉伯
• 阿拉伯聯合大公国

第八章市场动态

• 市场驱动因素
• 市场限制
• 市场机会
• COVID-19 市场影响

第九章 竞争态势

• 主要企业
• 市场占有率分析

第十章 公司简介

• Johnson Matthey
• BASF SE
• Umicore
• NGK Insulators, Ltd.
• Tenneco Inc.
• Clariant
• Cummins Inc.
• Clean Diesel Technologies, Inc.
• Cataler Corporation
• Eberspacher Group.

第十一章 市场展望与机会

• 新兴技术
• 未来市场趋势
• 投资机会

第十二章 附录

• 简称列表
• 来源和参考文献

Automotive Catalytic Converter Market Size And Forecast

Automotive Catalytic Converter Market size was valued at USD 196.61 Billion in 2024 and is projected to reach USD 361.76 Billion by 2032, growing at a CAGR of 7.92% from 2026 to 2032.

A catalytic converter is understood to be a critical emissions control device that is installed in vehicles to reduce harmful exhaust emissions.

It is recognized that the device works by converting toxic gases and pollutants in exhaust gas from an internal combustion engine into less toxic pollutants.

Furthermore, it is noted that catalytic converters are mandated by emissions regulations worldwide and are considered essential for meeting increasingly stringent environmental standards.

Global Automotive Catalytic Converter Market Dynamics

The key market dynamics that are shaping the automotive catalytic converter market include:

Key Market Drivers

Increasing Stringent Emission Regulations: Stricter regulatory limits on car emissions are dramatically increasing demand for catalytic converters. For example, the European Union's Euro 6 rules, which were enacted in 2015, require a significant reduction in nitrogen oxides (NOx) and particulate matter emissions from new automobiles. According to the European Environment Agency (EEA), new cars released an average of 95 grams of CO2 per kilometer in 2020, showing the continued push for cleaner vehicles and increasing the market for catalytic converters.

Growth in Automotive Production: Catalytic converters are in high demand due to increased car production and sales around the globe. According to the International Organization of Motor Vehicle Manufacturers (OICA), worldwide vehicle production reached 77.9 million units in 2021, marking a significant rebound from the effects of the COVID-19 pandemic. As vehicle manufacturing rises, so does the demand for efficient exhaust systems, particularly catalytic converters, to meet emission requirements.

Shift Toward Electric and Hybrid Vehicles: The growing popularity of electric and hybrid vehicles, which still utilize catalytic converters for their internal combustion engines, is a critical driver for the market. The International Energy Agency (IEA) reported that sales of electric cars surpassed 6.6 million units in 2021, representing a 108% increase from the previous year. As these vehicles often incorporate catalytic converters alongside electric powertrains, the transition to greener technologies is expected to sustain demand in the automotive catalytic converter market.

Key Challenges:

Raw Material Price Volatility: The prices of precious metals used in catalytic converters, such as platinum, palladium, and rhodium, are highly volatile and fluctuate significantly due to market demand, geopolitical tensions, and mining disruptions.

Technological Advancements and Adaptation: The rapid pace of technological advancements in the automotive industry, particularly with the rise of electric and hybrid vehicles, presents a challenge for traditional catalytic converter manufacturers. As more manufacturers shift their focus to electric vehicles, which do not require traditional catalytic converters, companies in the market must adapt to changing technologies and invest in research and development to innovate new solutions.

Regulatory Changes and Compliance: The automotive industry is subject to constantly evolving environmental regulations. Compliance with stringent emission standards is challenging, particularly for manufacturers that operate in multiple regions with different regulatory requirements.

Key Trends:

Electrification Impact: It is observed that the shift toward electric vehicles is prompting catalytic converter manufacturers to diversify their product offerings and explore new applications for catalyst technologies.

Nanotechnology Integration: Advanced nanotechnology is being utilized in catalyst development, by which the surface area of catalysts is being increased and their effectiveness is being improved while reducing the number of precious metals required.

Recycling Initiatives: It is noted that enhanced recycling processes are being developed for recovering precious metals from used catalytic converters, by which sustainability is being promoted and material costs are being potentially reduced.

Global Automotive Catalytic Converter Market Regional Analysis

The detailed regional analysis of the automotive catalytic converter market:

Europe:

According to Verified Market Research, Europe is estimated to dominate the automotive catalytic converter market during the forecast period. The European Union has implemented some of the world's most stringent vehicle emissions regulations, particularly with the Euro 6 standards. According to the European Commission, the Euro 6 regulations, effective since September 2015, mandate that new cars produce no more than 80 grams of CO2 per kilometer. This regulatory framework drives the demand for advanced catalytic converters, which are essential for meeting these emissions standards.

The shift toward electric vehicles in Europe significantly influences the automotive market landscape. According to the European Automobile Manufacturers Association (ACEA), the share of electric vehicles in new car registrations increased from 2.5% in 2019 to 10.5% in 2020. The growing adoption of EVs and hybrid vehicles necessitates advanced catalytic converters, contributing to market growth in this region.

Furthermore, increasing public awareness of environmental issues and the push for sustainable transportation solutions are driving factors in Europe. The European Environment Agency (EEA) reported that in 2020, transport accounted for about 25% of the EU's greenhouse gas emissions, highlighting the need for effective emissions control systems, including catalytic converters, to mitigate air pollution and reduce carbon footprints. This heightened focus on environmental sustainability propels the demand for advanced automotive technologies.

North America:

North America, particularly the United States, has established rigorous emissions standards to combat air pollution. The U.S. Environmental Protection Agency (EPA) has set Tier 3 emission standards, which require a significant reduction in vehicle emissions, including nitrogen oxides and particulate matter. According to the EPA, these regulations are projected to reduce harmful pollutants from cars and trucks by up to 80% by 2025, driving the demand for advanced catalytic converters to meet these stringent standards.

The recovery of the automotive sector in North America contributes significantly to the demand for catalytic converters. The International Organization of Motor Vehicle Manufacturers (OICA) reported that vehicle production in North America reached approximately 16.7 million units in 2021, up from 14.5 million in 2020. This growth in vehicle production directly correlates with an increased need for catalytic converters, essential for emission control in internal combustion engines.

Furthermore, increasing consumer awareness regarding fuel efficiency and environmental sustainability is propelling the automotive industry toward technologies that reduce emissions. According to the U.S. Department of Energy, improving vehicle fuel economy has become a priority, with the average new vehicle fuel economy rising from 25.4 miles per gallon (mpg) in 2020 to 26.4 mpg in 2021. This trend fuels the demand for efficient catalytic converters that enhance vehicle performance while minimizing emissions.

Global Automotive Catalytic Converter Market: Segmentation Analysis

The Global Automotive Catalytic Converter Market is being segmented based on Type, Material, Vehicle Type, and Geography.

Automotive Catalytic Converter Market, By Type

• Two-Way Oxidation
• Three-Way Oxidation-Reduction
• Diesel Oxidation Catalyst
• Others

Based on Type, it is noted that the Three-Way Oxidation-Reduction segment is dominating the market. It is understood that these converters are preferred due to their ability to simultaneously reduce nitrogen oxides, carbon monoxide, and hydrocarbons, by which they are being made ideal for gasoline engines.

Automotive Catalytic Converter Market, By Material

• Platinum
• Palladium
• Rhodium
• Others

Based on Material, the Automotive Catalytic Converter Market is segmented into Platinum, Palladium, Rhodium, and Others. The platinum segment is estimated to dominate the automotive catalytic converter market due to its superior catalytic properties and effectiveness in reducing harmful emissions. Platinum is particularly effective in oxidizing carbon monoxide and hydrocarbons, making it a preferred choice for a wide range of vehicle applications.

Automotive Catalytic Converter Market, By Vehicle Type

• Passenger Vehicles
• Commercial Vehicles
• Others

Based on Vehicle Type, the Automotive Catalytic Converter Market is segmented into Passenger Vehicles, Commercial Vehicles, and Others. The passenger vehicles segment is estimated to dominate the automotive catalytic converter market due to the high volume of production and sales of these vehicles globally. According to the International Organization of Motor Vehicle Manufacturers (OICA), passenger vehicle sales reached approximately 64 million units in 2021, accounting for a significant portion of the total automotive market.

Automotive Catalytic Converter Market, By Geography

• Europe
• North America
• Asia Pacific
• Rest of World

Based on Geography, the Automotive Catalytic Converter Market is segmented into Europe, North America, Asia Pacific, and the Rest of the World. The European region is estimated to dominate the automotive catalytic converter market due to its stringent emissions regulations and strong automotive manufacturing base. The European Union's commitment to reducing greenhouse gas emissions has led to the implementation of rigorous standards, such as the Euro 6 regulations, which mandate significant reductions in vehicle emissions. This regulatory environment drives the demand for advanced catalytic converters in both passenger and commercial vehicles.

Key Players

• The "Automotive Catalytic Converter Market" study report will provide valuable insight with an emphasis on the global market. The major players in the market are Johnson Matthey, BASF SE, Umicore, NGK Insulators, Ltd., Tenneco Inc., Clariant, Cummins Inc., Clean Diesel Technologies, Inc., Cataler Corporation, and Eberspacher Group.

Our market analysis also entails a section solely dedicated to such major players wherein our analysts provide an insight into the financial statements of all the major players, along with product benchmarking and SWOT analysis. The competitive landscape section also includes key development strategies, market share, and market ranking analysis of the above-mentioned players globally.

• Automotive Catalytic Converter Market Recent Developments
• In September 2023, BASF SE announced that a new production line for mobile emissions catalysts was being opened in Shanghai, China, by which the growing demand in the Asian market is being addressed.
• In March 2023, Johnson Matthey developed a new catalyst technology by which the use of platinum group metals was being reduced while maintaining conversion efficiency.

TABLE OF CONTENTS

1. Introduction

• Market Definition
• Market Segmentation
• Research Methodology

2. Executive Summary

• Key Findings
• Market Overview
• Market Highlights

3. Market Overview

• Market Size and Growth Potential
• Market Trends
• Market Drivers
• Market Restraints
• Market Opportunities
• Porter's Five Forces Analysis

4. Automotive Catalytic Converter Market, By Type

• Two-Way Oxidation
• Three-Way Oxidation-Reduction
• Diesel Oxidation Catalyst
• Others

5. Automotive Catalytic Converter Market, By Material

• Platinum
• Palladium
• Rhodium
• Others

6. Automotive Catalytic Converter Market, By Vehicle Type

• Passenger Vehicles
• Commercial Vehicles
• Others

7. Regional Analysis

• North America
• United States
• Canada
• Mexico
• Europe
• United Kingdom
• Germany
• France
• Italy
• Asia-Pacific
• China
• Japan
• India
• Australia
• Latin America
• Brazil
• Argentina
• Chile
• Middle East and Africa
• South Africa
• Saudi Arabia
• UAE

8. Market Dynamics

• Market Drivers
• Market Restraints
• Market Opportunities
• Impact of COVID-19 on the Market

9. Competitive Landscape

• Key Players
• Market Share Analysis

10. Company Profiles

• Johnson Matthey
• BASF SE
• Umicore
• NGK Insulators, Ltd.
• Tenneco Inc.
• Clariant
• Cummins Inc.
• Clean Diesel Technologies, Inc.
• Cataler Corporation
• Eberspacher Group.

11. Market Outlook and Opportunities

• Emerging Technologies
• Future Market Trends
• Investment Opportunities

12. Appendix

• List of Abbreviations
• Sources and References